Portalfräsmaschine BRIDGEPORT - VMC 1500

BRIDGEPORT VMC 1500 POrtal

Kondisi: baik (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.460 mm, panjang meja: 3.800 mm, lebar meja: 1.000 mm, beban meja: 30.000 kg, Chip conveyor Double doors at the front Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant unit (IKZ) 16 bar and 2.2 kW, delivery rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first-owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Maximum table load: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: 50 ISO/Bt/Mk X-axis feed rate: 10,000 mm/min Y-axis feed rate: 10,000 mm/min Z-axis feed rate: 10,000 mm/min Milling head auto-index: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Guodpfoxc Hh Djx Aa Dod Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute a representation or contractual terms. We recommend that you verify all important details yourself.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 1.626 mm, jarak lintasan sumbu Y: 1.016 mm, jarak gerak sumbu Z: 813 mm, berat keseluruhan: 13.611 kg, panjang meja: 1.626 mm, lebar meja: 914 mm, model controller: HAAS, daya nominal (semu): 22 kVA, diameter meja putar: 760 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 4.536 kg, Perlengkapan: konveyor serpihan, Commissioned 03/2006 IKZ 70 bar (TSC 1000) Gedevgmr Ispfx Aa Djud 30-station tool changer (BT50) Full 4th axis Spindle & gearbox replaced in 2017 Single-shift operation Machine can be inspected under power !!!! Free loading until CW04/2025 !!!! (In case of same-day delivery of our new machine)

Kondisi: bekas, Tahun pembuatan: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control: FANUC Total power requirement: 12 kW Machine weight approx. 2300 kg Space requirement approx. ... m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Work area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240-540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse max.: up to 1,000-4,000 mm/min / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling in aluminium: 500 cm³ AC main drive approx. 3.7 / 5.5 kW Total power approx. 12 kW - 380 V - 50 Hz Weight approx. 2,300 kg Accessories / special equipment: • Original FANUC control with screen and all modern subroutines, error diagnosis, electronic handwheel, RS 232, easy and fast programming, directly at the machine, etc. • Vertical turret head with 10 tool stations ISO 40, fast tool change time approx. 7 seconds chip-to-chip, • CNC-controlled rotary table mounted on the table (not a CNC axis), ideal as an indexing table, hydraulic, Type RST 2 • Separate coolant system • Various tool holders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminium. Condition: good to very good – demonstration-ready, under power. Delivery: immediate ex stock, loaded free onto truck. Payment: strictly net – upon receipt of invoice. We look forward to your order. Gedpfxot Hw H Ej Aa Djud We always have a large selection of all types of CNC machining centers in stock – please ask for alternatives!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 205 mm, jarak lintasan sumbu Y: 105 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: SIEMENS, model controller: SINUMERIK 828D, jumlah sumbu: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder, enabling efficient high-volume production. If you are looking for advanced turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill center we offer for sale. Contact us for further details. • Key Features: • Main spindle + sub spindle • Y-axis for multi-tasking machining • 12-station turret (24 indexing positions) • Live tooling (powered tools) • Tool interface: BMT45 • Workholding/capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Scope of delivery: Gedpfx Aaey Epi As Djud • Transportation to customer • Installation and commissioning of the machine • Basic operator training (14 hours) • Key Benefits: • Y-axis + sub spindle → full machining capability • Live tooling → turning and milling in a single setup • Bar feeder → ideal for series production • Automated parts handling → increased productivity Additional Equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20-50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5-65 mm • Chip conveyor (belt, side discharge) • Parts catcher for sub spindle • Oil skimmer • High-pressure coolant system (5-7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal beacon • Parts handling arm (for unloading sub spindle) • Tooling package: • 2x straight driven tool holders • 2x angled driven tool holders • 1x extended angle holder • 1x set of turning tool holders Technical Specification Counter Spindle: Yes Driven Tools: Yes

Kondisi: baru, Tahun pembuatan: 2025, diameter putar di atas sled silang: 250 mm, panjang pembubutan: 730 mm, diameter pembubutan: 500 mm, kecepatan spindel (maks.): 1.800 rpm, de Gsdpfexdmgvjx Aa Dsud

Kondisi: baik (bekas), Tahun pembuatan: 2010, Mesin memiliki opsi alat hidup dan sumbu Y. Alat potong tidak termasuk. Bagian yang ditunjukkan dengan tangan tidak termasuk. Detail teknis ditampilkan pada gambar. Gujdpoxpw Nlofx Aa Ded

Tahun pembuatan: 2019, jam operasional: 4.525 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12, MASCHINE ZUM SCHÄLEN UND RICHTEN VON STÄBEN IM SET Die Ausrüstung befindet sich in einwandfreiem Betriebszustand und kann unter Strom besichtigt werden. Komplett modernisiert im Jahr 2019 (neue Mechanik und Elektronik) Arbeitsbereich: Ø 20 – Ø 80 mm Stablänge: 2,5 – 6,0 m Bearbeitungstoleranz: ISO h9 (optional h8 möglich) Schäliefentiefe: bis zu 3,5 mm, abhängig vom Stahlsorte Stahlsorten: Kohlenstoffstahl, Wälzlagerstahl, Federstahl usw. Vorschubgeschwindigkeit: digital einstellbar 0,5 – 12 m/min Drehzahl des Schälkopfes: bis zu 1700 U/min Gjdpfx Aaewqb Scs Dsud Schneidwerkzeuge: zwei Sätze à 4 Messer mit automatischer digitaler Positionierung (Dreiecks- und Langmesser) Automatischer Ladetisch mit Stabzähler Zuführwalze mit motorisierter Höhenverstellung Einlaufandruckrollen – 4 vertikale Rollen mit umgekehrtem Gleichstrommotor Schälmaschine bestehend aus: - Vordere Führungseinheit - Schälkopf mit 4 Messern - Hintere Führungseinheit Stabausfahrwagen Hauptmotor und Getriebe Abdrückrollen am Auslauf – Twin-System Ablagetisch mit motorisierter Höhenverstellung Sammelbehälter mit Zähler und automatischer Sammlung der Fertigstäbe Hydraulikeinheit – komplett neu Schaltschrank – neu, zweiteilig ausgeführt.

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Gjdpfx Aaerfx Utj Djud Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them.

Kondisi: bekas, Various tool holders from brands such as Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 shank. Only available for sale per pallet. Pallet 5: EUR 2,730 total - 3x driven tool VDI 40: EUR 580 each - 11x tool holder VDI 40: EUR 90 each Pallet 6: EUR 2,640 total - 3x driven tool VDI 40: EUR 580 each Guedpfsvry T Nox Aa Dod - 10x tool holder VDI 40: EUR 90 each Pallet 7: EUR 2,640 total - 3x driven tool VDI 40: EUR 580 each - 10x tool holder VDI 40: EUR 90 each Pallet 8: EUR 2,730 total - 3x driven tool VDI 40: EUR 580 each - 11x tool holder VDI 40: EUR 90 each

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: fungsi terbatas, Mesin Gerinda Silinder CNC Dijual – STUDER S40 (1999) Kami menawarkan mesin gerinda silinder STUDER S40, tahun pembuatan 1999, untuk dijual. Mesin dalam kondisi kerja yang baik. Dilengkapi dengan satu spindle gerinda dan kepala revolver yang cocok untuk operasi gerinda eksternal maupun internal, sehingga menjadi solusi serbaguna untuk pemesinan presisi. Gujdpfxjy Elz Do Aa Dod Sistem kontrol: FANUC 16 Fitur Utama: - Kemampuan penggerindaan eksternal dan internal - Kepala roda revolver - Sistem kontrol FANUC 16 yang andal - Kualitas bangunan STUDER yang solid dan teruji - Manual operator Syarat Pengiriman: EXW (Ex Works) Mesin tersedia untuk inspeksi atas permintaan. Untuk informasi lebih lanjut, foto, atau penawaran harga, silakan hubungi kami.