1998 Levigatrice Spazzatrice merk CAMAM model C/1N/1S

Camam C/1N/1S

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: Gtsdpfxovu Hgbo Ah Dew - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 Godpfx Aheg Rn Iao Dstw TECHNISCHE DATEN: Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Gedowyda Uspfx Ah Djtw Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), I am selling window sets suitable for CNC window manufacturing centers: LEUT wood-aluminum 110mm Bore 50mm. Everything complete. Very good condition. Gsdsg Tumyepfx Ah Djtw Available as a set. Possible to purchase separately as well.

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of Manufacture: 1987 Weight: 11t General / Technical Data: Portal-type 6-spindle automatic lathe Gtjdjin Ub Tspfx Ah Dsw Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main processing time: Infinitely variable 1.95 – 78 sec. Secondary processing time: 0.79 – 2.13 sec. Drive power: DC motor, spindles 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Remarks: The machine cannot be retrofitted for bar work. Features: – 1 creep drive for setup operation – 1 automatic central lubrication system – 1 coolant unit with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-start with electrical interlock of the side door – Hinged belt chip conveyor – Machine configuration with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical Configuration: The electrical equipment comprises a direct current (DC) main drive with 20 kW power for the spindle drive and an AC servo motor for the feed drive with 8 kW power (IP 54 protection class), along with the respective switching and control units as well as the required installation. Total machine connection: 32 kW/h.

Kondisi: bekas, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums Gtedpfet Tqy Eox Ah Djw - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 Gtodpop N D Ngsfx Ah Djw SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: bekas, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 4-180 mm HESS – GLORIA 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's Description: ----- Designed according to modern standards with a compact construction. Quiet and vibration-free operation ensured by a rigid, stable machine housing and special insulation. Safety equipment in accordance with EU Machinery Directive, certified as "dust-tested." Offset sanding units with large-diameter tension rollers for optimal heat dissipation and stable belt tracking. Sanding units with forced belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt cleaning blast for longer sanding belt service life. Integrated brushing and finishing unit, adjustable via threaded spindle, with large dust extraction. Motorized thickness adjustment of the upper unit via precision-threaded spindles and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe balanced for optimum abrasive grain loading. Hardened and ground sanding rollers. Maintenance- and wear-free oxide ceramic sanding shoes (utility model protected) with excellent sliding properties, good heat dissipation, and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt change via pneumatically controlled belt slackening. Adjustable belt tracking for belt change. Electropneumatic pressure monitoring of compressed air supply with optical fault indication. Automatic machine stop on belt breakage and by infeed protection with integrated wood thickness control. Visual indicator on the control panel. Feed unit and proven, calibrated, non-slip and high-grip conveyor belts on precision-ground tables with spring-loaded pressure rollers. Drive shaft ensures even workpiece feed. Feed speed infinitely adjustable. Removal setting below via precision-threaded spindle with size display on scale ring (resolution 0.1 mm). Ergonomically arranged operating and setting elements on the machine front: top sanding and brushing units, bottom sanding and brushing units, workpiece feed unit, sanding thickness adjustment, operation indicator, fault indicator. Control and operator panel built into the machine housing with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Belt speed: 24 m/sec. Sanding width: 190 mm Sanding thickness: 4 – 180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable 5 – 25 m/min. Belt size: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20 – 25 m/sec. Extraction nozzle: 2 x 160 mm diameter, top of machine housing Gsdpfxsv D Rg Dj Ah Djtw Dimensions: Length: 1600 mm ...

Kondisi: baru, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-wood sanding machine for sanding solid wood, such as window profiles, etc. Ultra-sturdy high-end design with innovative features. Suitable for heavy-duty, continuous operation even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below 1st belt sanding unit with heavy steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush - Directly driven sanding rollers for slip-free power transmission - Maintenance and wear-free CERMET-coated sanding shoes provide excellent heat dissipation and absolute dimensional stability - External cooling of sanding zones for cooler sanding and extended sanding belt life - Forced pneumatic sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts, equipped with dust and dirt protection Gtsdpfx Aevnv Tqoh Dow - Material removal adjustment underneath via precision lead screw, scale ring with indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension force - Fast sanding belt change with pneumatic belt release - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece conveyance via calibrated, slip and grip proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded, finely adjustable hold-down rollers - Cardan shaft drive for jerk-free and consistent workpiece conveyance - Variable speed feed gearbox motor, 4–20 m/min - All motors with electrical protection - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes Ø 120 x 200 mm, each 0.37 kW - Extraction connections: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc 2740 mm): 2600 mm - Length with control panel (with Softdisc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE conformity ----- Price for the above-mentioned machine upon request! ----- Optional equipment (additional charge): Workpiece air blast: - Arranged at the machine outfeed via nozzles above and below, pneumatically controlled Sanding belt air blast (4-belt): Arranged via nozzles directly at the radii of the tension rollers inside the extraction enclosure, timer-controlled on/off each 5...

Kondisi: siap digunakan (bekas), Global HS-8307 Hot Air Welding Machine Automatic Belt Cutter You are welcome to arrange an inspection. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Godpfevaxfajx Ah Djtw Deviations in technical data as well as errors in the item description may occur and are reserved.