Cuci mobil - menyelam

CB Bio-Circle Maxi

Kondisi: bekas, Parts cleaning system from a renowned Austrian company The system comes from a business closure and was operational until the end. Todpfx Absvcrutsvjc Cleaning agents are included.

Kondisi: baru, Tahun pembuatan: 2026, Parts cleaning machine, spray cleaning system type L800FP Fully automatic hot water parts washer with basket drive via gear motor, housing made of stainless steel 1.4301, pipework and rotary basket made of zinc-plated steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Useful height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar Todpfx Aohl H Ubjbvjc - Tank capacity: 120 liters - Heating: electrically adjustable (ambient temperature – 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter protects pump Delivery: ex works, FCA

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F39033, KEKEISEN universal bed-type milling machine UBF 2000/13, machine no. F39033; year of manufacture: 1996 Well-maintained, very good condition, partially mechanically overhauled and tested in 2025 2-axis universal milling head, automatically adjustable, with Hirth coupling lock Intermediate positions adjustable in 1° increments via jog mode Tool holder SK50 according to DIN 69871/872 Longitudinal travel (X-axis) 2000 mm Cross travel of spindle head (Y-axis) 1000 mm Vertical travel of spindle head (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Max. table load 5000 kg Spindle drive power 30 kW (100% duty cycle), max. torque 1180 Nm Todpfx Aeykuxhjbvsc Spindle speed 20 – 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis feed rates 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electronic handwheel HR 330 Drive technology by Baumüller Coolant system with internal coolant supply up to 16 bar. Switchable air/water Purolator dual change-over filter with 200 l collection tank Tool changer with 30 stations Fully enclosed work area, open at the top, with longitudinal chip conveyor Electrical connection data 400 V; 50 Hz; approx. 55 kVA Supplied without installation elements (mounting feet)

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front section. Effective cleaning is ensured by a high-pressure pump and a special spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 1 to 80 bar. Technical specifications: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable 1–80 bar Tank volume: 75 litres / Heating power: 2 kW Standard features: • Blow-off pistol inside the cabin • Frame, feet, lid and housing made of stainless steel • Removable stainless steel plates above the tank • Upward-opening lid with 2 hand ports and gloves • Viewing window made of toughened glass • Door opening/closing system assisted by gas struts • Door monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for controlling the cleaning pump • Interior lighting • Neoprene gloves, 600 mm length (chemical-resistant) • Height-adjustable feet +/- 50 mm • External mini pneumatic oil separator Tjdpfxef A Nqqe Abvec

Tahun pembuatan: 2023, jam operasional: 1 h, Kondisi: baru, nomor mesin/kendaraan: MANUWASH3128, de Tjdpfxjd Tg Nno Abvjc

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Max. load capacity: up to 1,000 kg Basket is loaded and unloaded by the operator using a feed trolley positioned in front of the unit (detachable / mobile). Usable height: 800 mm Washing tank: volume: 430 litres, spray pressure: 6.0 bar Rinsing tank: volume: 280 litres, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + Automatic water refill on both tanks + Automatic chemical dosing 1-10% (Dosatron) + Special spray system (can be optionally activated) for small parts (= E-spray system) + Side channel blower with height-adjustable air knife system (blow-off drying) + Steam extraction with condensate return + Weekly timer for electric heating + Pre-installed for retrofit of oil separator Tsdpfx Abev Tm Aysvec + Media filtration in both circuits (washing and rinsing) via bag filter (manufacturer: Eaton, Topline) + Exterior cladding with stainless steel sheet + Complete system fully insulated + Tanks separated into two modules; fully insulated (different temperatures possible) + Removable filter baskets in recirculation + Stainless steel circulation pumps with mechanical seal and soft starter System is on display at the Glogar Technology Center and is used exclusively for washing trials.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, with 8 pallets Control: Fanuc M-Pro1 (0i-MF Plus) Travel paths X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size: 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Number of magazine stations: 220 Max. tool diameter: Ø95 mm Max. tool diameter with adjacent positions empty: Ø185 mm Max. tool length: 400 mm Tsdpouafl Iofx Abvec Max. tool weight: 8 kg Spindle taper: BBT40 Big Plus™ Speed: 15,000 rpm Chip conveyors on both right and left sides in the machine Coolant through the spindle Dual chip conveyor Full-featured 4th axis from PARKSON 50 kVA transformer

Kondisi: bekas, Cutter grinder, grinding machine, angle grinder, lathe tool grinder, tap/drill bit grinder, cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Feinmechanik Weilheim, Deckel tool grinding machine, model SO/64-6550 -Motor power: 0.37 kW, 2800 rpm Tjdepix Nrepfx Abvoc -Speed: 2800 rpm -Grinding wheel diameter: 100 mm -Dimensions: 510/450/H1280 mm -Weight: 67 kg

Kondisi: baik (bekas), 1320 KLT stacking crates 800 x 600 mm (other sizes also available) 33 pallets of 40 units each (including packaging) SSI Schäfer shop bins Price applies for purchase of the entire offered quantity. If you require different quantities, please contact us. Offer is directed to dealers, resellers, public and church institutions only! We kindly ask private buyers to refrain from inquiries! 1320 KLT stacking crates by SSI Schäfer Reinforced for a load capacity of up to 40 kg, Also ideal for use as plant containers Article number for the complete unit: KLT8060_1320 For inquiries, please provide a contact telephone number Stacking crates (1320 units), used and in good condition Visually in good shape, no damage (observed new price: €35.00 per crate) €3.00 net / crate Ideal for warehouse racking, parcel trolleys, order picking trolleys, transport containers, transport carts, storage racks, log transport trolleys or for use with yellow bags, Elastic straps provide additional stability for the side grids, as these tend to flex outward when filled. With base dimensions of 80 cm x 60 cm, these crates are ideally sized for Euro-standard crates, e.g. bakery crates 60x40 cm or butcher crates 60x40 cm or any other crate in the 600x400 mm and also 800x600 mm format. In other listings we offer ratchet straps, elastic tensioners, shrink wrap hoods, castors, intermediate shelves, Tjdpfol Tiqyex Abvec bakery crates and butcher crates (E2 crates), We are happy to advise you. Matching roll containers also available in stock / see photos: Dimensions of roll cart: Base area: 810 x 720 mm Height: approx. 1530 mm Load capacity: up to 500 kg Dimensions of stacking crates: 80 x 60 cm Height: 11.5 cm (All dimensions are approximate) Inspection possible by appointment over the phone Roll carts can be disassembled and therefore fit in (almost) any passenger car (photo similar) Further articles available from stock, please inquire if interested.

Kondisi: bekas, 1 mesin pengasah pahat bekas Merek: Deckel Tipe: SOE dengan optik Tahun pembuatan: 1988 Data teknis: Kecepatan motor penggerak: 2800 rpm Tjdpeyl Iipsfx Abvjc Kecepatan spindle penggiling: 4500 rpm Daya penggerak: 0,55 kW / 380 Volt Berat sekitar 200 kg Aksesori dan perlengkapan: Collet penjepit Optik Rangka mesin / dudukan bawah Peralatan