Pengikat tepi

CEHISA Dynamic 9C - Motion

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Kfodped Nuu Hsfx Aahja Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: baru, Tahun pembuatan: 2023, Weight: 950 kg Voltage: 3 x 400 V Motor power (S6): 9.2 kW / 12 HP Dust extraction connection: 160 mm Cutterhead diameter: 120 mm Number of knives: 4 Knife dimensions: 630 x 30 x 3 mm Max. cutting depth: 8 mm Width: 630 mm Height capacity thickness planer: 3 – 300 mm Thickness planer table dimensions: 1160 x 630 mm Variable feed speed: 5 – 22 m/min Feed roller diameter: 70 mm Including TERSA cutterhead Image shows optional accessories Ksdpfx Aaomdr A Ejhofa

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Kodpfx Ajt Hagnjahofa Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 1.020 h, Fungsionalitas: berfungsi sepenuhnya, offer-Holzher-Nextec-7707-EN Kjdpfswtiq Sex Aahefa

Kondisi: siap digunakan (bekas), fr Kodpfxouciqae Aahjfa

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Length of sliding table: 3,000 mm Kfjdpfxex Dax Ee Aahja Cutting width at rip fence: 1,000 mm Cutting height with saw blade diameter 450 mm: 75 - 150 mm Cutting height with saw blade diameter 350 mm: max. 100 mm (each at 90° saw blade position) Double roller carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via input at the control panel Motorized tilting of the saw unit via input at the control panel Supplied with new 350 mm saw blade mounted 2-axis scoring saw unit, adjustable via the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table surface when not in use Scoring unit adjustment possible while the machine is running RAPIDO scoring saw blade — facilitates adjustment of scoring width, set up within max. 3 minutes Adjustment range 2.8 – 3.8 mm Additional equipment: - Telescopic crosscut fence extendable up to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g., for trimming cuts on solid wood planks

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Kfedpfx Aaov Szt Dehea Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin CNC Morbidelli X 400 dengan meja datar (nesting) Ksdpsxqzm Djfx Aahofa

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Control unit with 10.4" touch color display Extendable workpiece support Motor-driven, positioning-controlled pressure beam Chain feed with 12 m/min feed speed Ball bearing roller support disc, d = 770 mm Double-motor jointing milling unit / 2 x 1.1 kW Edge feed for coil and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated glue application unit Pre-melting unit for EVA adhesive Exchangeable glue application unit for EVA Exchangeable glue application unit for PU Motor-driven, positioning-controlled pressure unit Double-motor end trimming saw unit / 2 x 0.50 kW Double-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW Corner processing unit Radius scraper Flat scraper Kfsdpfx Aaew Nadtshea Double-motor polishing unit (buffing) Spraying unit for release agent at machine infeed side Spraying unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim