Beli Cehisa Pengikat Tepi bekas (2.822)

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Hjdpfx Aasxyiiloiet

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Hjdpfx Aaovvkd Toiet

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data Hedpfjvvkfdex Aaiet - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 15 mm, 1 Hodjx E A Dispfx Aaijt

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Hsdpfx Asvvkfwsaiot

Kondisi: baru, Tahun pembuatan: 2026, Mesin Pelapis Tepi EBM360B – Mesin Pelapis Tepi Profesional untuk Tepi Lurus dan Melengkung. Mesin pelapis tepi EBM360B adalah mesin meja profesional yang dirancang untuk pelapisan tepi yang presisi pada komponen lurus dan melengkung. Dengan konstruksi yang kokoh, sistem kerja yang andal, dan otomatisasi proses kunci, perangkat ini digunakan di bengkel pertukangan skala menengah dan besar yang membutuhkan hasil yang konsisten, efisiensi, dan kualitas tinggi pada komponen yang diproses. Keunggulan utama mesin: * Aplikasi Serbaguna – Menangani komponen lurus dan melengkung, lebar tepi 10–60(68) mm, ketebalan 0,3–3 mm. * Otomatisasi Proses – Gunting pneumatik untuk memotong pita secara presisi, pemberian dan pengambilan material otomatis dari wadah. * Konstruksi yang Stabil dan Tahan Lama – Rangka yang kokoh dan mekanisme yang andal memastikan pengoperasian tanpa masalah. * Perekatan Efektif – Tangki lem yang dipanaskan dengan daya 2 kW menjamin perekatan tepi yang merata dan kuat. * Pengoperasian Ergonomis – Panel kontrol yang ditempatkan dalam jangkauan operator, pengaturan parameter yang intuitif. * Efisiensi Tinggi – Pengaturan kecepatan umpan yang lancar dalam rentang 0–14 m/menit memungkinkan penyesuaian dengan jenis produksi. Konstruksi dan Teknologi Mesin pelapis tepi EBM360B dirancang untuk beroperasi dalam kondisi industri yang berat. * Rangka Mesin – Konstruksi yang stabil dan dilas menghilangkan getaran dan meningkatkan akurasi kerja. * Sistem Pemanas – Pemanas dengan daya 2 kW, memastikan pemanasan lem yang cepat dan penyebarannya yang merata. * Motor Kerja – Satu set motor (0,18 kW, 0,37 kW, 0,4 kW) yang bertanggung jawab atas penggerak independen, sehingga meningkatkan daya tahan komponen. * Gunting Pneumatik – Menjamin pemotongan tepi yang bersih dan presisi. * Sistem Pneumatik – Tekanan kerja 6 bar memastikan stabilitas sistem umpan dan pemotong. Hodpfjwl Eaajx Aaijt Presisi dan Efisiensi Kerja Berkat kemampuan untuk bekerja dengan radius minimum 20 mm, mesin pelapis tepi EBM360B memungkinkan pelapisan tepi yang presisi bahkan pada komponen dengan geometri yang kompleks. Pengaturan kecepatan umpan yang lancar hingga 14 m/menit memungkinkan penyesuaian efisiensi dengan skala produksi, sekaligus mempertahankan kualitas perekatan yang tinggi. Aplikasi Mesin ini dirancang untuk bengkel pertukangan dan mebel profesional, di mana hal-hal berikut menjadi penting: * pelapisan komponen lurus dan melengkung, * konsistensi dan presisi pada sejumlah besar komponen, * efisiensi tinggi dalam produksi massal dan satuan, * daya tahan dan estetika penyelesaian tepi. Peralatan Standar * Pemanas lem dengan daya 2 kW, * Gunting pneumatik untuk memotong tepi, * Pengumpan pita otomatis, * Panel kontrol dengan pengaturan parameter kerja, * Rangka mesin baja yang stabil. PARAMETER TEKNIS Lebar tepi 10–50 (58) mm Ketebalan tepi 0,3–3 mm Radius kerja minimum 20 mm Lebar pemotongan maksimum 50 mm Daya pemanas 2 kW Catu daya 400 V Motor 0,18kW/0,37kW/0,4kW Kecepatan umpan 0–14 m/menit Tekanan udara 6 bar Dimensi (panjang x lebar x tinggi) 1550 × 800 × 1000 mm Berat 185 kg

Kondisi: bekas, Holz Her Sprint 1312 FÜ + PU Desain berat - ketebalan tepi 0,4 - 12 mm Kontrol layar SPS Unit pra-pemotongan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material gulungan dan potongan Stasiun aplikasi lem: sistem cartridge + lem PU nozzle deteksi otomatis Tinggi benda kerja 6-55 mm Unit pemotong untuk gulungan dan potongan hingga ketebalan tepi 12 mm dengan penyesuaian kemiringan gergaji 0-10° Unit milling, milling rata hingga 12 mm, milling radius - chamfer milling - 15° MOT - 4 sumbu Unit pisau tarik untuk chamfer dan radius dengan 2 holder pisau tarik pneumatik penyambungan pneumatik masuk dan keluar Unit pisau tarik permukaan - finishing Sistem penyemprotan - PU Hsdpfx Asx Eilqsaiot Mesin dalam KONDISI SANGAT BAIK tersedia dari stok di Lieboch

Kondisi: bekas, 1 Hsdpfxewtfvke Aaiot

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Hjdpsvvkfqsfx Aaiot

Kondisi: bekas, Lokasi gudang: Sonnefeld Hedpfx Aaoway Dcjiot

Kondisi: baik (bekas), Tahun pembuatan: 2002, Edge banding machine with jointing milling, otherwise fully equipped, PU adhesive can be used. Hsdegmn H Ajpfx Aaiot

Kondisi: bekas, Tahun pembuatan: 2018, tinggi total: 1.600 mm, panjang total: 5.370 mm, lebar total: 1.020 mm, szc5qo5x Hedpsxyy Ryefx Aaijt

Kondisi: baru, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to achieve perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. Features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, crosscut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a flat scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Hsdel D Rp Espfx Aaiot Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application to the workpiece for edge material up to 3 mm Jointing cutter (including diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change preparation including glue drainage device HF crosscut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combination version) Robust chain drive Double roller overhead pressure with ball bearings Inspection window on rear side of the machine Extendable workpiece support Including special equipment: F2/12 flat scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: 22.198, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 8 h, frekuensi input: 50 Hz, Model showroom Mesin edge banding sepenuhnya dikendalikan CNC, sangat lengkap: Unit pra-frais Unit lem Unit gergaji potong depan & belakang Unit frais halus atas & bawah Pembulat sudut depan & belakang Unit skrap radius Pilihan tambahan tersedia: Roller masuk untuk 2 tipe pita, termasuk bahan solid hingga 5 mm. Unit skrap lem R-8 N. PC layar sentuh 19” (baru). Pemandu masuk CNC. Unit pra-frais dengan tool berlian setinggi 65 mm. Pneumatik on/off. Lampu inframerah di bagian masuk. Sistem masuk universal yang dapat diatur Antistatik di bagian masuk (tipe Riepe) Unit anti-lengket setelah unit frais (tipe Riepe) Unit pembersih di bagian keluar (tipe Riepe) LED di kabin. Hsdew Ufuhspfx Aaiet Kit Wifi. Sistem motion LED. Unit lem Duo Melt EVA/PUR Nesting panel berlubang engsel. Pelumasan otomatis pada rantai.

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, panjang total: 7.920 mm, masa garansi: 3 bulan, HOLZ-HER edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Switching PUR glue and cleaning the system is quick and easy within a few minutes. Axis adjustment via ultra-precise, high quality servomotors. Special features for materials with protective foils, such as high gloss and super matt surfaces! One of the machine's absolute highlights is the multifunction package, which shows its strengths in workshops processing many different types of edges. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on application — from the longitudinal milling unit to corner copying up to the profile scraper. The extendable workpiece support and extended feed-in area assist with large workpieces, while a guide device helps to feed smaller parts into the machine. Edge thickness, rolls: 0.4 – 3 mm (material dependent) Edge thickness, strips: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet in EVA and PUR quality, with minimal effort. Processes all common edge types up to high gloss & super matt, as well as solid wood edges up to 15 mm. iTronic — pressure and adhesive quantity control Prepared for integration with RETURN system Motorized pressure bridge with top belt drive Hjdpfxex Emf Dj Aaist Multifunctional units for rapid setting of radius, flush, and chamfer Spraying devices vertical & horizontal and much more. Delivery, installation, and operator training can be arranged by us for an additional charge. The machine is currently in our dispatch warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall apply. Our General Terms & Conditions can be found on our website at holzher.de/de/agb.

Kondisi: baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: 0-200-24-0779, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 55 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, panjang total: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left side. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Hodpoztl Scjfx Aaiot Base machine with 80 mm wide transport chain as workpiece feed unit - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming, climb/contra-rotation, 2 x 4 kW, usage-controlled Horizontal positioning via NC motor (CAN) GLUING UNIT A20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA adhesive - Capable of processing both EVA and PUR adhesives - Edge magazine: min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered and 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit, horizontal, 2 motors each 0.8 kW (front/rear edge), for chamfer/straight as well as excess edge trimming - Pre-/flush trimming unit 1.15 kW, top/bottom - FK11 profile trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via control panel Various interchangeable heads equipped with tools - Universal trimming unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Brandt Optimat KDF 420 Mesin Perekat Tepi Kontrol Powercontrol PC 20 Ketebalan pelapisan 0,4–8 mm Hodpfox Dzw Nsx Aaiet Tinggi pelapisan 8–60 mm Pengerjaan pra-potong dengan mata pisau DIA Pemotongan Trimming & milling radius Pisau penarik radius Pisau penarik permukaan Unit pemoles Panjang mesin 4360 mm Manual pengoperasian dan alat Tahun produksi 2008 Harga 15.000,-

Kondisi: bekas, Tahun pembuatan: 2010, de Hodpfx Aasw I H Rksiet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Numerical Control Smart Touch with Sintra HD Software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height adjustable electronically via CNC Motorized panel feed guide, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate for 1 position Hjdowlbxlspfx Aaijt Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors, equipped with dynamic extraction system following the blade movement Flush trimming/chamfering unit with staggered 2 motors, electronically adjustable via CNC Non-stick unit Corner rounding unit with 2 multifunction motors (chamfering + corner rounding) Electronic edge scraper unit, electronically adjustable via CNC Glue scraper unit Brush unit "SP-501" Automatic return system with bridge discharge Winner 4A

Kondisi: siap digunakan (bekas), Very good condition. Hodpfxevunm Aj Aaijt

Kondisi: seperti baru (mesin pameran), Exhibition machine edgebander 5 units: Jointing cutter unit incl. AIGNER diamond jointing cutterheads, with DIA replaceable knife system Konstantin and controlled edge air blast nozzle behind the second jointing cutter. Cross-cut saw unit with 1 motor, 2 saw blades Radius milling unit, with Easy Set adjustment system Hsdpfx Aajw Rcmyeiet Radius scraper unit, extendable and retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-sided usable scraper knives. The unit is extendable and retractable. General equipment: - High gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and protective cabin for all units and the glue pot - Teflon-coated glue pot with energy-saving standby mode - Glue roller with feed screw for long and high workpieces - Pressure zone with motor-driven first steel pressure roller + one rubber roller - Roll shears for edges 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction nozzles: 3 x 150 mm Connection: 8 kW - 400 V / Compressed air: 6 bar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: CA.03.013.12, jam operasional: 1.555 h, Edgebanding machine FELDER G400 from trade-in – used condition as received from the customer. The machine has been function-tested – see video. Hjdpfxong H Uvs Aaist Glue scraper (optional) is installed.

Kondisi: sangat baik (bekas), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Diamond jointing cutters with conventional and counter-rotation - Glue pot located underneath - Glue pot quick-change device - Suitable for use with PUR adhesives - GLUEBOX system - Pressure unit with powered roller - Trimming saw with 2 HF motors - Pneumatically swiveling trimming saw - Flush / radius milling unit - Motorized positioning control for milling unit - x-motion PLUS - Corner copying unit with diamond-coated cutter - Radius scraper blade - Radius scraper blade with motorized positioning Hjdpfx Aaou R S Nwsiet - Surface scraper blade - Surface scraper blade with position-controlled actuation - Infeed lock - Spray unit for separation agent - Spray unit for lubricant - Spray unit for cleaning agent - Year of manufacture: 2022 ----- Technical Data ----- Edge thickness, coil material: 0.4 – 3 mm Edge thickness, strip material: 3 – 6 mm Workpiece thickness: 8 – 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen size: 15 inch Jointing cutter dimensions: D 80 x 64 mm Jointing cutter power: 1.1 kW Trimming saw power: 0.35 kW Milling station power: 0.75 kW Extraction connection Ø: 80 + 160 mm Compressed air connection: 7 – 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical components checked - Pneumatic components checked - Ready for immediate use

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Hedpfjv Sv Enox Aaijt Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2008, Mesin Bekas Tahun Pembuatan: 2008 Peralatan dan Data Teknis: Ketebalan pelapis maksimum: 8 - 55 mm Pelapisan dengan unit pembulatan maksimum: 45 mm Ketebalan pelapis tepi: 0,4 - 8 mm Ketebalan tepi rol: 0,4 - 3 mm Kecepatan pengumpanan: 12 m/menit Termasuk: panel kontrol yang dapat diputar Unit penggabungan HF dengan 2 motor Termasuk: bak pemanas cepat yang dapat diganti, dilapisi teflon Termasuk: pemosisian elektronik dari rol penekan Termasuk: unit gergaji potong ganda yang dapat diputar Termasuk: unit pemotong tepi Termasuk: unit pemotong alur, radius, dan sudut dengan paket penataan (nesting) yang dikendalikan Termasuk: pisau penarik radius dengan paket penataan (nesting) Termasuk: pisau penarik permukaan Termasuk: unit pembuat alur Termasuk: unit pemoles Hsdpfx Asw Nadgsaist Termasuk: unit penyemprot Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Flörsheim