Gergaji pita

Centauro SL 6000 Gold

Kondisi: bekas, Tahun pembuatan: 2000, unimat23e_spec Dujdpfowztw Sjx Aftep

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Duedewwl Nljpfx Aftjp Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Dedpfx Afewwiybetoup Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: bekas, Weinig brand moulder, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Djdpfx Afsk N I I Njtoup

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button Djdpfx Afjxranpstjup • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: baru, Table size: 420 x 450 mm Table height: 215 mm Table tiltable up to: 45° Saw or cutting blade diameter: 200 mm Corresponding cutting depth: 47 mm Electrical connection: single-phase AC 230 V Djdec Snvfjpfx Aftjup Weight: 14.5 kg

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Dusdpfxjxy Tmne Aftep Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Pusat pemesinan CNC BIESSE Rover C 6.50 CONF.2, tahun 2007 Area kerja: sekitar 140 × 460 cm Dimensi mesin: 300 × 650 cm Berat: sekitar 6.100 kg Dua kepala kerja Duodjw Rpd Sspfx Aftjp Majalah alat: 22 posisi Spindel bor vertikal: 28 pcs Spindel bor horizontal: 12 pcs Harga dapat dinegosiasikan, tersedia segera. Harga belum termasuk PPN.

Kondisi: bekas, Tahun pembuatan: 2008, Biesse Rover A 3.40 FT K2 Numerisch gesteuertes Bearbeitungszentrum ROVER A 3.40 FT K2 Bearbeitungsfelder: X = 3685 mm; Y = 1290 mm; Z = 160 mm Die Ausstattung umfasst: - Automatisches Schmiersystem - FT-Bearbeitungstisch - 4 vordere + 4 hintere Anschläge, jeweils mit Pneumatiksystem und Sensoren - 4 seitliche Anschläge mit Pneumatiksystem und Sensoren - Vakuumpumpe 300 m³/h - 12 kW (16,1 PS) Elektrospindel mit ISO 30 Aufnahme, luftgekühlt - Blasvorrichtung/Flansch für die Montage von Aggregaten auf der Elektrospindel - Vorrüstung für Bearbeitungsgerät mit 360° Interpolation und Getriebeantrieb - Bohrkopf BH 21 L - Revolver-Werkzeugwechsler mit 18 Plätzen - Vorrüstung zur Montage der automatischen Entladevorrichtung für Nesting-gefertigte Werkstücke - Steuerung über Fernbedienung Dujdjx Afvtspfx Aftep - Numerische Steuerung XP600 - BIESSEWORKS - BIESSE NEST Modul - Klimaanlage für den Schaltschrank - Frequenzumrichter - Sicherheitsvorrichtungen mit Trittmatten (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MaschinenSucher. Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Kondisi: bekas, Tahun pembuatan: 2014, CNC-controlled 5-axis gantry machining center for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC LED position indicator system for manual positioning of vacuum clamps and consoles. Positioning accuracy +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Cardanic 5-axis head for milling, drilling and sawing at any angle. - Interface for HSK F 63 - Z-axis travel: 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for highest precision and long service life - Frequency converter for electronic spindle speed control 0-24,000 rpm - Maximum tool weight 6 kg including holder - Maximum tool length 230 mm from underside of motor spindle - 18-position disc tool changer below Drilling head 21 spindles 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Total drill length: 70 mm Shank diameter: 10 mm Horizontal spindles: 4 One reinforced drilling spindle with mounting for grooving saw Dsdpfsxvaymex Afteup Max. drill diameter: 10 mm Total drill length: 70 mm Drill mount: 10 mm