Mesin penggilingan CNC

Chiron FZ 22 L

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 630 mm, kecepatan spindel (maks.): 10.500 rpm, jumlah slot dalam magazin alat: 40, Perlengkapan: konveyor serpihan, Pendulum-type long-bed machining Control: 3-axis CNC path control Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2,600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3,440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Hodpfx Aasxwwc Uozenr Tool change time 2.0 sec Maximum drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES  Automatic tool changer ATC 40  Long part machining/pendulum operation (center partition missing)  Splash guard enclosure with electrically secured sliding doors incl. machine light  Coolant system with high-pressure pump and paper band filter Container capacity 500 l, N-pump 200 l/min at 1.5 bar HP pump 50 l/min at 20 bar, incl. double switch filter  IKZ Internal coolant supply through the spindle  Chip conveyor with discharge height of 1,050 mm  Rinse gun  1 NC rotary table with chuck  1 hydraulic counter bearing  1 clamping bridge  Electronic handwheel  Setup elements  Documentation

Kondisi: bekas, Table length 400 mm Table width 300 mm X-axis travel 300 mm Hnodpfxovwgq So Aazjr Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive set of accessories.

Kondisi: bekas, Machine has a fault in the main spindle. CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) Hnedjquhbgspfx Aazer - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: bekas, Tahun pembuatan: 1972, Diameter putar di atas tempat tidur: 1650 mm Diameter putar di atas support: 1350 mm Panjang pemotongan: 10.000 mm Kecepatan putar: 1,4 - 280 rpm Diameter lingkaran di atas tempat tidur: 1580 mm Tinggi pusat di atas rel datar: 825 mm Hnjdpfxey S Duvj Aazsr Panjang tempat tidur: 13.350 mm Lebar tempat tidur: 1.120 mm Diameter spindle di bantalan depan: 260 mm Lubang spindle: 82 mm Jarak geser support atas: 500 mm Diameter pinol tailstock: 200 mm Berat benda kerja antara pusat maksimum: 10.000 kg Berat mesin sekitar: 25,5 t Daya: 45 KW Mesin berasal dari tangan pertama, bebas dari cacat, dan berada dalam kondisi sangat baik. Pada tahun 2023, kotak spindle telah direkondisi, termasuk penggantian bearing utama spindle, pelapisan krom, serta pengerjaan ulang spindle utama dan roda dasar (tempat duduk bearing). Rel panduan tempat tidur juga dalam kondisi sangat baik sesuai usianya. Aksesori - Pelindung chuck Perlengkapan - Display digital 3 sumbu - 1 unit steady rest - 1 unit roller support - Conveyor chip (drag chain 300/100)

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 750 mm, lebar meja: 1.500 mm, panjang meja: 850 mm, kecepatan rotasi (maks.): 2.500 rpm, gores kuas bulu: 120 mm, SHW UF 5 Travel Paths Hnedpfx Aevfm I Toazor • X-axis (rotary table): 1,500 mm • Y-axis (vertical spindle head): 1,000 mm • Z-axis (horizontal spindle head): 750 mm Control System • CNC Control: Heidenhain TNC 355 Automatic Swivel Head (change between horizontal and vertical machining) Quill 120 mm Milling spindle taper: SK 50 Spindle speed: 2,500 rpm Partial Overhaul 2014 • Year of manufacture: 1990 • Inspection/Refurbishment: 2025 Table Assembly • Travel: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip Conveyor Enclosed Splash Guard Cabin For this model series (SHW UF 5), we have ALL spare parts in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in tool milling machines. Our services include, among others, spare part supply, on-site customer service, machine overhauls, and control system retrofits. Our Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used bed milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drilling/milling machine - used metal milling machine - used metal mill - used cnc mill - cnc milling machines - cnc bed milling machine - large part machining - CNC large scale machining - milling - SHW - UF5 - UF 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Kondisi: bekas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture: 1986 - Refurbished in 2000 Pressing force: 200 tons Distance between uprights (front): 2050 mm Clearance between uprights (lateral): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Power supply: 380 Volt, 50 Hz - 8-way flat guide for ram - Clamping plate with 22 mm T-slots on ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in top dead center - Travel measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control console, free-standing - Ground-level installation - Central lubrication system - Operating manual with circuit diagrams Space requirement (upright): L x W x H 3700 x 2900 x 5900 mm Hodpfxsdzp Tco Aazsnr Total machine height with motor: 5900 mm Space requirement for horizontal transport: L x W x H 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut berat tipe TCE 200 x 8m dengan kontrol Sinumerik 828 Diameter ayunan maksimum di atas ranjang: 2000 mm Diameter ayunan maksimum di atas support: 1700 mm Panjang pembubutan: 8000 mm Beban maksimum antara kepala tetap: 80 ton Beban maksimum antara kepala tetap dengan dua steady rest: 100 ton Daya motor utama: 150 kW Hodpfjyy Nx Nsx Aazonr Kecepatan spindle (3 rentang): 0,5–160 rpm Diameter pelat chuck: 1700 mm Diameter penjepitan minimum di chuck: 150 mm Diameter penjepitan maksimum di chuck: 1400 mm Diameter quill tailstock: 450 mm Lebar alas: 2280 mm Tinggi alas: 650 mm Perlengkapan khusus: - Chuck 4-jaw independen, diameter 1700 mm - Sistem perkakas: support gandeng - Steady rest tetap 200–600 mm - Steady rest tetap 600–1100 mm - Steady rest tetap terbuka hingga 1600 mm Total berat mesin bubut sekitar 110 ton

Tahun pembuatan: 2007, Kondisi: baik (bekas), Gebrauchte Bystronic Byspeed CNC-Lasermaschine 4,4 kW zu verkaufen Gebrauchte Bystronic 4,4 kW Laser zu verkaufen VIDEO UNTEN: Byspeed 3015 4,4 kW Baujahr/Neumaschine: 2007 Hersteller: Bystronic Modell: Byspeed 3015 Blechgröße: 3 Meter x 1,5 Meter / 3000 mm x 1500 mm Laserleistung: 4,4 kW / 4400 Watt Steuerung: ByVision CNC02 Automatisierung: k.A. Baujahr: 2007 Zustand: guter betriebsbereiter Zustand / seit Neuanschaffung lückenlos gewartet Byspeed 3015 4400 W März 2010 Betriebsstunden: 44.189 Std. Schneidstunden: 20.490 Std. Gut erhaltene Maschine, durchgehend mit Wartungsvertrag von Bystronic UK betreut. Enthaltene Optionen: - Bypos automatische Fokussierung - CutControl - 2 Schneidköpfe - Werkzeug und Zubehör - Torit-Absauganlage Hnodpjgwa Swofx Aazor Lieferung, Inbetriebnahme und Einweisung gegen Aufpreis möglich.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Hedpfx Aex D Eccsazenr Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine depth: 4308 mm

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used, well-maintained CNC-controlled tool milling machine in travelling column design, equipped with GRUNDIG Dialog 11 CNC path control Table size: 1600 x 675 mm Tool holder: SK / ISO 40 Travel paths: X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load capacity: 2000 kg Spindle speed range: 20 – 6300 rpm Hnodpfshhuf Hox Aazjr Feed range, stepless: 2 – 10,000 mm/min Rapid traverse (all axes): 10 m/min Quill stroke: 80 mm Drive power 100% duty cycle: 7.5 kW 40% duty cycle: 12 kW Machine dimensions (L x W x H): 3600 x 3000 x 2300 mm Machine weight: 6800 kg Control cabinet dimensions: 1700 x 900 x 1750 mm Control cabinet weight: 470 kg Accessories / Special Features: • CNC tool milling machine suitable for tool and jig construction, training, and mould-making applications • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input supported by graphics, “contour pocket” milling cycle for automatic rough-milling of irregular pockets, including those with islands, coordinate system offset and rotation • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling device • Fully enclosed safety cabin • Ball screw spindles in all 3 axes • Coolant system • Machine lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel