Mesin bubut menengah kecepatan vari

Colchester Mascot VS 2000

Tahun pembuatan: 1998, Kondisi: baik (bekas), Hersteller: UNION Modell: Ti 1800 Laodpfx Ajkwcdbsl Njd Baujahr: 1998 Technische Spezifikationen Tischlänge: 2000 mm Tischbreite: 1800 mm Maximale Tischbelastung: 16.000 kg Vorschub in der V-Achse: 1250 mm Drehbereich B-Achse: 360.000° Maximale Drehgeschwindigkeit B-Achse: 1,35 U/min Verfahrgeschwindigkeit V-Achse: 4000 mm/min Abmessungen (ca.): Länge: 3400 mm Breite: 2000 mm Höhe: 920 mm Gewicht: 6500 kg Bitte beachten Sie: Die obenstehenden Angaben wurden nach bestem Wissen und Gewissen von uns sowie, soweit möglich, vom Hersteller zusammengetragen. Die Angaben erfolgen in gutem Glauben, ihre Richtigkeit kann jedoch nicht garantiert werden. Sie stellen daher keine zugesicherten Eigenschaften oder vertraglichen Zusicherungen dar. Wir empfehlen, alle wichtigen Details eigenständig zu überprüfen.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 420 mm, lubang spindel: 105 mm, diameter pembubutan: 660 mm, tinggi pusat: 330 mm, panjang pembubutan: 2.000 mm, panjang total: 3.500 mm, lebar total: 1.400 mm, tinggi total: 1.600 mm, kecepatan spindel (maks.): 1.600 rpm, kecepatan spindel (min.): 36 rpm, berat keseluruhan: 3.700 kg, READY TO DELIVER FROM STOCK – SPECIAL OFFER!!! NEW "CE" COMPLIANT. LATHE WITH MECHANICAL CLUTCH 3-AXIS DIGITAL READOUT AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID TRAVERSE ENGAGEMENT. ONE-PIECE CAST IRON BASE. Centre height: 330 mm Maximum swing over bed: 660 mm Maximum swing over carriage: 420 mm Maximum swing in gap: 870 mm Tool post height: 32 mm Distance between centres: 2000 mm Bar capacity: 105 mm Spindle mount: Camlock D1-8 Spindle speed: (12) 36 – 1600 rpm Longitudinal feeds: 0.063 – 2.52 mm/rev Cross feeds: 0.027 – 1.07 mm/rev Metric threads: (22) 1 – 14 mm Inch threads: (26) 2 – 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED WITH THE MACHINE: 320 mm Ø 3-jaw self-centering chuck (reversible jaws) Laodpfjyyn Ddsx Al Njd 400 mm Ø 4-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock centre MT 5 Threading dial indicator Leadscrew guard Tool post guard Chuck guard Rear chip guard Quick-change tool post type C LED work lamp Coolant system Electro-mechanical foot brake Quick-release tailstock carriage Oil-bath apron gears Adjustable levelling pads

Kondisi: sangat baik (bekas), Maximum turning diameter over bed: 575 mm Maximum turning diameter over carriage: 525 mm Maximum turning diameter over cross slide: 300 mm Distance between centres: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum top slide travel: 140 mm Maximum tailstock quill travel: 150 mm Ledpfowlgdyjx Al Njad Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Kondisi: baru, Lifting capacity in kg: 1,000 kg Reach: 4,000 mm Height: 3,000 mm (underside of jib) Total column height: 3,790 mm Slewing range: 270 degrees Ledpfexak Hxsx Al Nsad Total weight: approx. 525 kg Description: - Festoon cable system - Drag cable, cable sag approx. 800 mm - Floor-controlled operation via pendant controller Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-fall - Painted in RAL 5017 traffic blue - Lifting capacity: 1 t - Hook path: 3,000 mm - Maximum hook position: 2,442 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-stage (pole-changeable): 1.3 / 5 m/min - Lifting power: 0.22 / 0.9 kW - Duty cycle: 60% ED - Switching frequency: 360 cycles/hour Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set), size LS 200 - Comprising 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation mounting, incl. grouting accessories For the alignment of the slewing jib crane, an assembly gap between the base of the column and the building floor must be provided. This assembly gap is to be grouted by the customer after approx. 4 weeks of crane operation. The illustration shows a similar crane system.

Kondisi: baik (bekas), Tahun pembuatan: 1956, Heavy-duty lathe, engine lathe, turning lathe, geared head lathe -Manufacturer: Weisser, geared head lathe type PF200 -Turning length: 1340 mm -Swing over bed: 420 mm -Swing over cross-slide: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 – 1400 rpm -3-jaw chuck: Röhm Ø 250 mm Lodpjtzf N Rjfx Al Nead -Accessories: included, see photos -Tailstock taper: MT4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Tahun pembuatan: 2013, Kondisi: baik (bekas), Plasma cutting and extraction table, dimensions 2,500 x 6,000 mm. Gantry bridge. Carriage with servo drives (for positioning the gantry bridge in the X-direction). Machine track, length 8 m. HEB450 profiles for the machine track foundation, 8 m. Lajdpfx Aletp Dhpo Nsd Plasma cutting unit Hypertherm HPR 400XD, 1 unit. Plasma bevel cutting unit including automatic torch height control system. Fume extraction unit Filtercube 4H for plasma cutting system. Oxy-fuel cutting torch, 3 units. Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 units. Torch suspension for oxy-fuel torch (motor-driven). Torch suspension Single Drive for oxy-fuel torch, 2 units (with automatic torch positioning). Laser pointer (for torch alignment and positioning). Computer control system (consisting of an industrial PC and a control panel). Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support). Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel and accommodation expenses) and 1 day online support). Emergency stop with stop cord. Year of manufacture: 2013.

Kondisi: bekas, Tahun pembuatan: 2013, Drahterodiermaschinen / EDM Perjalanan sumbu X: 600 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 350 mm Ukuran benda kerja maksimum X: 800 mm Ukuran benda kerja maksimum Y: 570 mm Ukuran benda kerja maksimum Z: 340 mm Berat maksimum benda kerja: 1000 kg Ukuran meja X: 1050 mm Ukuran meja Y: 710 mm Dengan penyusunan kawat otomatis Sumbu U / V: 150 x 150 mm Pemotongan dalam rendaman air Laedjy S Tgzopfx Al Njd Kontrol CNC: SPW

Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.250 mm, beban meja: 12.000 kg, diameter spindel: 130 mm, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 2.200 mm, lebar meja: 1.800 mm, panjang pemakanan sumbu X: 3.500 mm, panjang umpan sumbu Z: 1.250 mm, Diameter spindle: 130 mm Perjalanan sumbu X: 3.500 mm Perjalanan sumbu Y: 2.500 mm Perjalanan sumbu Z: 1.250 mm Sumbu B (meja): 360º Perjalanan sumbu W (sleeve): 800 mm Meja: 2.200 x 1.800 mm Kapasitas beban maksimum meja: 12.000 kg CNC: Heidenhain 424 M Kecepatan spindle (2 rentang): 10 - 2.500 RPM Tangki pendingin: Ya Tipe alat: BT 50 Ledpfx Aley Hgvre Njad Berat: 42.000 kg Dimensi: 6.460 x 6.960 x 4.400

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, mesin baru saja tiba dan akan segera dibersihkan. Lajdpfxeyh Ndwe Al Nod diameter pembubutan di atas alas: 400 mm jarak antara senter: 1000 mm ukuran spindle: 50 mm ukuran chuck: 200 mm rentang kecepatan: 40 rpm hingga 2000 rpm berat mesin: 1700 kg termasuk chuck 3 rahang dan pemegang alat

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 1.000 mm, diameter pembubutan di atas alas geser: 710 mm, panjang pembubutan: 8.000 mm, Used heavy-duty lathe with comprehensive steady rest equipment – Ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm has been specially designed for pipe machining applications. Thanks to its well-thought-out machine concept, the cutting tool can easily pass by the open steady rests – perfect for precise processing of long, hollow workpieces. Technical highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Centre height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency inverter, steplessly adjustable Design advantages: • One-piece cast machine bed, artificially aged – for maximum stability and stress relief • 5 hardened and ground guideways for highest precision • Stepless feed adjustment of the longitudinal axis via ballscrew – no Norton or apron gearbox • Electrically operated tailstock with hydraulic clamping • Manually adjustable cross slide with trapezoidal leadscrew • 4-position tool post, manually rotatable • Triple guided compound slide – for exceptionally smooth operation Steady rests & pipe machining: • Various steady rests (fixed and travelling) optionally available • Motor-driven steady rest carriers with hydraulic clamping • Quill adjustment conveniently accessible from the operator side • Travelling steady rests mountable on the left or right as required Lsdjv Tnttopfx Al Njad Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise processing of pipes. The stepless speed and feed regulation provide high flexibility and user comfort.