Mesin bentukan

COMACA N225 EPAS/3

Kondisi: bekas, druck-50t-1500mm-cybelec-de-specs Dkedpfxora Rrhs Alyer

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Dedpfx Alouz If Njyokr Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, rollensaetze-herkuleswetzlar Dkodpfx Aeglaq Iolyer

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: manual, lebar kerja: 1.020 mm, penyesuaian balok pelipat: 46 mm, Sudut pembengkokan (maks.): 135 °, berat keseluruhan: 340 kg, panjang total: 1.350 mm, lebar total: 850 mm, tinggi total: 1.175 mm, Perlengkapan: dokumentasi / manual, Upper and lower blades are removable in segments Includes manual rear gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Finger widths ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 340 kg Width ----- 1350 mm Depth ----- 850 mm Dodpsga T A Djfx Alyjkr Height ----- 1175 mm

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Dodpfxsw D Aq Te Alyokr Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Rotary Welding Table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via hand-crank gear motor, 0 - 90° Rotation speed: 0.3 to 2.5 rpm Including foot remote control Surcharge: Dksdpfx Aljc Ug Tloyjr Quick-release chuck Diameter: 300 mm, €450

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t Dedpfx Aoktg Dhslyskr - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Max. bar diameter 65 mm Max. bar length 3000 mm Dksdpjin Hkmsfx Alyjr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, blechbreite-1050-mm Dkjdpfxjxaa T Uo Alyer

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, EUROMAC MULTI 220/6R Corner Notcher Maximum cutting length: 220 mm Maximum sheet thickness: 6 mm Variable cutting angle: 30° - 120° WITH PUNCHING UNIT 2-station EUROMAC notching and bending machine, model Multi 220/6R Press brake, press brake, cutting machine Cutting capacity for steel: 6 mm at 45 kg/mm² 4 mm for stainless steel Station I (Notching) Notching angle: 60° to 140° (with special blades 30° to 140°) Blade length: 220 mm Table dimensions: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle with integrated blade set: 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade gap adjustment - Sheet hold-down device - Built-in graduated scales on the table - Adjustable angle stops - Operated by foot switch Station II (Press Brake Unit) Dsdpfx Aswqdfxslyjkr Pressing force: 18 tons Table dimensions: 950 x 340 mm Working height: 1100 mm - Infinitely variable lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible 4-sided die block (V-openings: 90°), length = 415 mm - Upper tool 90°, length = 415 mm Motor power: 4 kW Power supply: 400 V, 50 Hz Overall dimensions: 115 x 100 x 125 cm Weight: 900 kg