Mesin penghancur Comafer MAC 300 1997

Comafer MAC 300

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 10.120 h, panjang total: 1.800 mm, tinggi total: 1.700 mm, lebar total: 1.200 mm, de-hu-001 Hsdpewh Na Nsfx Ahvjh

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Granulator, separator untuk kabel tembaga atau aluminium. Laju umpan: 9 m/menit. Kapasitas: 150 kg/jam kabel yang digranulasi. Diameter granula sekitar 3 mm, kandungan tembaga sekitar 50%. 15 kW, 400 V, 50 Hz. MANUAL INSTRUKSI DAN PERAWATAN TERSEDIA. Hodpfx Asxxirwehvjh

Kondisi: bekas, Saw blade diameter 500 mm Cutting height 120 mm Motor power 5.5/7.5 kW Working length 4100 mm Salvapush 2000 Optimizing Crosscut Saw for complete wood optimization and defect cutting Version 4100 (working length) ----- Hsdpfxowhf Ipe Ahvsh Technical Features: - Cutting range: minimum 30x12 mm, maximum 270x120/300x95 mm. Special cutting ranges available on request. - Length of boards before cutting: minimum 500 mm, maximum 4100/5100/6100 mm, depending on version - Possibility of a single cut on the last 40 mm of the board. Minimum length of the final wood waste: 5 mm. - Maximum wood weight 120 kg (special solutions available on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special worktable inclined at 25 degrees to facilitate loading and to keep the workpiece clamped - Double steel frame, highly robust, reinforced and painted. - Special locking guard at the rear for appropriate operator safety. Pusher speed up to 60 m/min in accordance with current safety regulations: Movement speed of the carriage directly adjustable by computer depending on the cutting area. Faster versions available as an option. - Very robust pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminium support beam is large and robust: height 135 mm, width 120 mm. - Special transmission system with a 50 mm wide toothed belt with 33 hardened steel bands inside, for high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Laser photo cell for wood detection and luminescence reader for fluorescent markings. System is fixed in position; no manual adjustment required for changes in wood thickness. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting qualities - Robust outfeed table for collecting cut pieces, made of hardened steel, length 3000 mm. Inclined at 25 degrees, like the rest of the line, and fully equipped with guide. ----- Price for above machine on request! ----- Options at extra cost: - Extended collecting table (outfeed) - Gravity pre-loading system - Zebra label printer - Upgrade saw motor from 5.5 kW to 7.5 kW - Increase cutting range to 140x240 – 100x300 with 550 mm diameter circular saw blade - Horizontal side ejection - Wide pusher plate Optional alternatives for collecting table (outfeed): - Version TT Rotary Table: outfeed table with rotation for discharging the entire cut stack in a single cycle - Floor hatch for rotating outfeed table, for disposing of end pieces of sawn wood - Version LS Electronic Sorting Device: Sorting of cut pieces by size and quality with 3 high-speed ejectors ----- Prices for the above options on request! ----- (Technical data as per manufacturer – subject to change!)

Kondisi: baik (bekas), 0065 Hjdpfx Asv Rf Agjhvoh

Kondisi: bekas, Förderschnecke (Big Bag Entleerstation) típus Előtartállyal Big Bag ürítőállomásként használható. Átmérő: kb. 150 mm Hossz: 2300 mm Hajtás: 2,20 kW Hsdpox Ifgljfx Ahvsh Csiga: normál acél

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), diameter mata gergaji: 600 mm, panjang pemakanan sumbu X: 6.200 mm, berat keseluruhan: 2.300 kg, jenis penyesuaian ketinggian: pneumatik, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, frekuensi input: 50 Hz, diameter lubang cakram: 80 mm, diameter nosel ekstraksi: 120 mm, tinggi kerja: 900 mm, sambungan udara terkompresi: 6 batang, masa garansi: 12 bulan, The KP 900 Automatic crosscut saw is an ideal solution for preparing material in pallet manufacturing and other wooden packaging product production. On average, this saw can process 27–30 m³ of pallet sections or approximately 20,000 pallet blocks per 8-hour shift, depending on the cross-sectional dimensions of the material. The saw can be operated by one or two workers, depending on the type of material being processed, which is loaded manually into the machine. Hjdpsubbtkjfx Ahvjh Main Cutting Modes 1. Manual Mode Each cutting length is set by moving the material using buttons on the control panel or by setting the length on the digital control display. The cut is initiated by pressing a button on the display. This mode is suitable for individual, successive cuts. 2. Automatic Mode a) You set a single cutting dimension for the entire length of input material. After activating the cut by foot pedal, the entire piece is automatically cut into the preset length. Once completed, the pusher returns to the set length of the input material. This mode is ideal for producing pallet blocks. The advantage is quick transitions between different values when input material sizes change frequently. b) You set the desired combination of cutting lengths for the entire length of input material. After activating the cut with the foot pedal, the machine automatically cuts the material to these specified length combinations. Once finished, the pusher returns to the preset length for the next batch. Up to 10 programs with 10 lengths each can be stored in the machine’s memory. Programs are easy to overwrite, edit, insert, or delete. With this mode, you achieve high material efficiency—especially useful when producing sections for a wide range of packaging products. The automatic mode allows for programmable front and rear trim cuts. By default, the saw is configured for LEFT-handed operation, i.e. material flow is from right to left. The automatic feeding system is included in the standard configuration. It consists of a pusher unit running on a precision linear rail with bearings. This design ensures long service life for the linear guide and extremely accurate positioning of the workpiece for cutting. Integrated side and top clamps firmly secure the material during cutting, pressing it both to the work table and against the rear stop. This guarantees that every cut is precise, perpendicular, and eliminates unwanted material movement. A clear LCD touchscreen display provides straightforward and convenient machine control. All control elements are highly visible, reduce operator fatigue, and provide a comprehensive overview. Maximum ergonomics and advanced software give the operator full control over the machine. The infeed work table allows the operator to conveniently sort and prepare material before cutting, then feed it smoothly into the loading area, minimizing downtime and strenuous handling of the material. The table is inclined at 8° and equipped with a safety flap at the end to prevent material from being pushed beyond the operator’s reach. The standard fixed outfeed table is two meters long and partially covered by the cutting area guard. Operators can safely remove the cut material without risk from off-cuts, chips, or the saw blade. The table is also inclined at 8°.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 600 mm, ketinggian potong (maks.): 180 mm, panjang pemakanan sumbu X: 3.200 mm, The KP 900 EasyCut cross-cut saw is an ideal solution for companies processing solid wood that place maximum emphasis on the quality and yield of their production. It is designed for defect cutting and length optimization. On average, this saw can process up to 900 running meters per hour (with 4-meter-long material and 8 cuts per piece). The saw can be operated by one or two workers, depending on the specifications of the material being processed. The KP 900 EasyCut optimizing saw is suitable for production facilities focused on cutting accuracy, minimizing waste of costly material, high processing speed, and workplace safety. The machine offers a high degree of flexibility for both input and output material dimensions. The saw features intuitive controls and dedicated software for easier programming and setting of cutting parameters. The KP 900 EasyCut also offers enhanced mechanization options at the outfeed. Machine Functions Length Optimization This function enables minimization of waste and maximization of output yield. The loaded material is optically scanned by the feeding unit and automatically divided according to preset length programs. The optimization system always prioritizes the longest possible assigned length that can fit into the loaded piece. The saw automatically measures the length of each piece, so there is no need to pre-sort material by size. If defects are marked, the feeding unit will optically divide the material into separate pieces (from defect to defect) and these are then independently optimized for length. If a cut piece does not meet the minimum length specified in the program, it is classified as waste. The selected program allows for automatic front and rear trimming. Quality Optimization – Waste Removal With this function, the operator inspects the workpiece visually and, using special chalk, marks two perpendicular lines at the locations of defects to be cut out. As the feeding unit scans the chalk markings with its optical system, the required cut positions are recorded. The ensuing parts, of various lengths (from defect to defect), are automatically optimized lengthwise and software processed to the required lengths as specified in the cut program. If a piece does not meet the program’s minimum length requirement, it is classified as waste. The program allows for automatic front and rear trimming. Rigid and Heavy-Duty Construction with Robust Blade Enclosure Hsdpfx Ahsv Iz Rnovsh This ensures a high standard of workplace safety. High-Grade Components, Premium Materials, and Precision Manufacturing These factors guarantee trouble-free machine operation and long lifespan even under demanding working conditions. Material Flow As standard, the saw is LEFT-HANDED, meaning material flows from right to left. Automatic Infeed System This is a combination of an advanced pusher unit and optical sensors. The system is integrated into the infeed table. It moves along a precision linear guide rail with bearings, ensuring extremely accurate positioning of workpieces for cutting (up to ±0.1 mm accuracy). The feeder, using its integrated optical system, reads the material’s length, marked defects, and quality. Clear 15" Touchscreen Display

Kondisi: baru, Tahun pembuatan: 2025, en-1 Hsdpfxovz H Dao Ahveh

Tahun pembuatan: 2006, Kondisi: bekas, Hellweg MDS 120/150 beside-the-press granulator 1.5 kW Hodsixt Hlspfx Ahvsh Year: 2006 Power: 1.5 kW Suitable for: Feed opening: 150x150 mm Rotor knives: 3 Stator knives: 2 Rotor diameter: 150 mm Rotor width: 120 mm Price: €2,750.00 Contact person: Mr. Rainer Eckerle

Kondisi: siap digunakan (bekas), Technische Daten Leistung und Motoren Hsdpfeukzakex Ahvsh Spannung: 400 V Anschluss: Dreiphasig Gesamtabmessungen Länge: 1660 mm Breite: 1100 mm Höhe: 1470 mm Gewicht: 1200 kg