Beli Compactsystem Martina 55 bekas (5.834)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm Bwodpfevz Hq Hsx Am Iol - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Bwodpfsvz Hq Tex Am Iol Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Bwsdpfx Asvz Hqyjm Iel Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ Bsdpfjvz Hqtex Am Iswl - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation Bwjdpfx Amjvz Hqmo Isl - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet Bwjdpfxovz Hqgs Am Isl The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V Bjdpfxovz Hhxj Am Iowl - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: sangat baik (bekas), Nomor katalog 6825 DATA TEKNIS Bedpfx Ameyh H Ugs Ijwl - ukuran hopper pengisian (p x l) 900x630 mm - lebar kerja rotor 540 mm - motor 7,5 kW - diameter saringan 20 mm - ukuran pisau 40x40 mm - jumlah pisau 15 buah - auto-reverse - laci penekan - dimensi (p/l/t) 2060x980x1580 mm - berat 1008 kg KEUNGGULAN – produksi Jerman – tidak dicat ulang – kondisi sangat baik – mesin pencacah bekas Harga netto: 37.900 PLN Harga netto: 9.020 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (dengan fluktuasi kurs yang signifikan harga dapat berubah)

Kondisi: baik (bekas), The scope of delivery includes: 01x pallet rack beam, used Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm Each connector with 3 holes Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 01x set of fastening hardware consisting of: 06x M10 bolts Bodpsibzftofx Am Iewl 06x nuts 06x washers

Kondisi: baik (bekas), Data teknis balok rak pallet: Sistem rak: Jung Heinrich Tipe: Esmena Paket termasuk: 01x balok rak pallet, bekas Warna material: hijau Profil kotak: 155 x 55 mm Kait: 4 pengait Jarak bebas dalam: 3.610 mm Bwedpfx Aew Upxwom Iel 02x pin pengaman, bekas Eksekusi: sepenuhnya galvanis Untuk pengamanan balok memanjang terhadap kenaikan yang tidak disengaja Kontak di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan di tempat. Pengiriman atau transportasi lebih lanjut dari produk ini akan dikenakan biaya tambahan yang dapat ditanyakan secara terpisah, tergantung pada lokasi pengiriman atau cakupan pengiriman.

Kondisi: baik (bekas), Spesifikasi teknis untuk balok palet rak: Sistem rak: SLP Dalam pengiriman termasuk: 01x balok palet rak, bekas Warna material: abu-abu Profil IPE: 100 x 55 mm Pengait: 3 HK (kait) Jarak dalam bersih: 3.000 mm 02x pin pengaman, bekas Desain: sepenuhnya galvanis Untuk pengamanan balok memanjang terhadap pengangkatan yang tidak disengaja Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Bwodpfx Aoxnzdkjm Isl Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau transportasi lebih lanjut akan dikenakan biaya tambahan, yang dapat ditanyakan secara terpisah tergantung lokasi pengiriman dan volume pesanan.

Kondisi: baik (bekas), The scope of delivery includes: 01x pallet racking beam, used Color: orange IPE profile: 100 x 55 mm Connector: 5 holes Clear span: approx. 2,700 mm Each connector: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm Bwodoibzgxspfx Am Ijl 01x set of fastening material consisting of: 10x M10 bolts 10x nuts 10x washers

Kondisi: baik (bekas), Data teknis untuk balok rak palet: Sistem rak: SLP Dalam paket pengiriman termasuk: 01x balok rak palet, bekas Warna material: abu-abu Profil INP: 100 x 50 mm Pengait: 3 HK (kait) Jarak bebas (clear width): 2.000 mm Bwodpfxoxyvznj Am Iol 02x pin pengaman, bekas Tipe: sepenuhnya galvanis Untuk mengamankan balok longitudinal terhadap pengangkatan yang tidak disengaja Kontak person di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Transportasi tambahan atau pengiriman produk ini akan dikenakan biaya tambahan yang dapat ditanyakan secara terpisah tergantung lokasi pengiriman dan cakupan pengiriman.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, Lafis LEH 55 electric pallet truck Model LEH 55 P Load capacity: 5,500 kg Year of manufacture: 1990 Forks/platform: 2,500 mm x 1,000 mm Drive motor: 290 W Hydraulics: 2,000 W Battery: 24 V Supplied with battery and charger Lift height: 200 mm Bedpfxorgrags Am Iewl Battery pack: Banner PSS 320, year of manufacture 2015

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), vertical centrifugal pump Vertical Centrifugal Pump 30 m³/h Chemical Pump Bwjdpfxsh T Dwfj Am Ijl FIP ALPHA VCM 50-33 Year of manufacture: 2007 DN: 50 Nominal flow: 30 m³/h Nominal head: 25 m Pressure rating [bar]: 16 Temperature range [°C]: -25 to +140 Speed: 1450 rpm Electric power: 11 kW 400V 50Hz Motor speed: 1450 rpm Length: 1550 mm Width: 550 mm Design: Vertical, radially split volute casing pumps, sump or channel impeller Applications: Handling of paints, aggressive and process fluids, also suitable for liquids containing solid particles, in the chemical and petrochemical industries. If you require further information, we are here to help! Please contact us via the contact form or give us a call. Your listing was translated automatically. Translation errors may occur.

Tahun pembuatan: 1993, Kondisi: bekas, Material: plain steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Dead weight: approx. 1500 kg Delivery rate: 14.5 m³/h Max. operating pressure: 100 bar Technical documentation: No Bjdpfsgb D Hisx Am Ijwl Remarks: Piston diameter: 57 mm, Stroke rate: 326 1/min, Stroke length: 105 mm

Tahun pembuatan: 1990, Kondisi: bekas, Material: standard steel Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Unladen weight: approx. 1,500 kg Delivery rate: 14.4 m³/h Bwedegb D Irjpfx Am Iel Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Stroke rate: 326 rpm, Stroke length: 105 mm

Kondisi: bekas, Tahun pembuatan: 2006, tinggi angkat: 3.260 mm, pengangkatan bebas: 1.520 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, panjang garpu: 1.490 mm, lebar garpu: 1.400 mm, tinggi total: 2.600 mm, panjang total: 3.400 mm, lebar total: 1.540 mm, warna: lain, Empty weight: 9,220 kg Lifting capacity: 5,500 kg - Year of manufacture: 2006 - Documentation available: Yes └ Documentation type: User manual - CE marking available: Yes - CE certificate available: No - Serial number: ECE55-6 - Operating hours: 0 - Lifting force: 5,500 kg - Lift height: 3,260 mm - Overall height: 2,600 mm - Free lift: 1,520 mm - Fork length: 1,490 mm - Maximum fork width: 1,400 mm - Minimum fork width: 430 mm Bwjdpfxjyxndhj Am Iol - Number of wheels: 4 wheels - Attachment: Fork positioner - Options: Radio, heater, free lift, work lights, full cab - Mast: Duplex - Drive: Electric - Make/type: Hoppecke - Battery voltage: 80V - Transport dimensions: 3,400 mm x 1,540 mm x 2,600 mm (L x W x H) - Transport weight [kg]: 9,220 kg - Shipping units [pcs.]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Tess van den Boom

Kondisi: bekas, Tahun pembuatan: 2003, 1 Bsdpfxow I H Rqo Am Iowl

Kondisi: bekas, Used machine Wide Belt Sander Motor power: 4 HP / 3 kW Motor speed: 2890 rpm Table dimensions approx. 2460 mm x 900 mm Manual table height adjustment Transport dimensions approx. 3600 x 1600 x 1450 mm Weight approx. 500 kg Bedpfx Aewka I Asm Ijwl Availability: short notice Location: Röllbach

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, Minipack Replay 55 EVO adalah mesin pembungkus shrink film manual dengan tudung, untuk produksi menengah. Bwedpfxex Tr N Dj Am Iel – Kapasitas hingga 300 unit per jam – Dimensi area penyegelan yang dapat digunakan: 540 × 390 mm – Dimensi produk maksimum: 500 × 380 × 200 mm – Dimensi roll film maksimum: Ø 250 × 600 mm – Tinggi meja kerja: 925 mm – Dimensi mesin (tertutup): 1.260 × 810 × 1.165 mm – Dimensi mesin (terbuka): 1.260 × 810 × 1.310 mm – Berat mesin (netto/bruto): 105 / 126 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of manufacture: 2016 Injection unit: Bedpfx Asy Dp Dgom Iewl Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 cc Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Boy service in France It is possible to change the screw diameter to 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pump/motor: 11 kW Heating power: 7.7 kW Total power: 18.7 kW All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 38 mm Shot weight: 123.9 g Injection pressure: 1508 bar Dosage volume: 136.1 ccm Clamping Unit: Clamping force: 55 t Tie bar distance: 360x335 mm Platen size: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha - touchscreen Additional equipment: Machine in very good technical condition Bjdpfx Asy Dp Edsm Iewl Operating hours: 16,624 in automatic mode 2 pneumatic core pulls Injection unit hardened – bimetallic The machine has been regularly serviced by the authorized Boy Service Partner in France It is possible to change the screw diameter to either 32 mm or 42 mm Dimensions: Weight: 2,430 kg Length/Width/Height: 3.25 x 1.14 x 2.02 m Drive: Pump/motor: 11 kW Heating capacity: 7.7 kW Total installed power: 18.7 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Bodpfey Dp Huex Am Ijwl Injection pressure: 2500 bar Dosage volume: 20 cc Clamping unit: Clamping force: 35 t Tie bar spacing: 320x320 mm Platen size: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional equipment: Machine in very good technical condition EUROMAP 67 Robot interface Air valve x 2 Hot runner control x 6 Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Krauss Maffei service in Germany The screw diameter can be changed to 20 mm or 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pump/Motor: 11 kW Heating capacity: 3.78 kW Total connected load: 14.78 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), RS Simulators Temperature Shock Chamber ST2K 1000 / 55 Device Data Manufacturer: RS-Simulators Model: ST2K 1000 / 55 Version: Temperature Shock Chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability tests. Applications in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Rapid switching operation for thermal shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: Approx. 580 liters Internal (W x H x D): Approx. 1070 x 680 x 800 mm Max. load: Approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Max. current draw: 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): Approx. 2800 x 2400 x 2200 mm Weight Approx. 2800 kg Equipment Horizontal basket movement C-rails in test chamber Large test basket (>1000 mm) Observation window Internal lighting SE-604 controller Program operation and data recording RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: Approx. 8.0 kg R23: Approx. 2.5 kg Bjdpfx Amsy H Igfs Iewl Operating Data Operating hours: Approx. 4,500 h Sound level: Approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% rH Scope of Delivery RS Simulators Temperature Shock Chamber ST2K 1000 / 55 Scope as shown Service prior to delivery (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as shown in the pictures. Note Used device, sold without warranty. Inspection by arrangement possible. Loading and transportation can be organized upon request. Subject to alterations and prior sale. If you have any questions, please contact us.