Beli Compactsystem Martina 85 bekas (3.532)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. Nwedpfx Aevz Hq Tedisi - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C Nwjdpfsvz Hhxex Adiji - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h Nwodpfsvz Hqgjx Adiei - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa Nwsdpfx Aevz Hqmjdisi - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution. Nwjdpfx Aevz Hqtediji

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C Nwodpfovz Hqysx Adiei - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Nwsdpfx Ajvz Hq Hediji The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baik (bekas), We offer you a used compensation plate from the manufacturer Polypal for purchase. Nwjdsg Siiqspfx Adisi Scope of delivery includes: 01x Compensation plate, used Manufacturer: Polypal Type: SKUP Material finish: sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Weight/unit: 0.119 kg

Kondisi: baik (bekas), Technical data for compensating plate: Manufacturer: Polypal Scope of delivery includes: 01x compensating plate, used Total width: approx. 130 mm Nedei Hkm Uspfx Adiswi Total depth: approx. 85 mm Material thickness: approx. 1.50 mm Borehole Ø: approx. 15 mm Number of boreholes: 2 pcs. Weight: approx. 0.12 kg | per piece

Kondisi: baik (bekas), Technical data for the pallet racking upright: Racking system: Hovuma Scope of delivery includes: 01x pallet racking upright, used Material color: cream white Profile dimensions: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Nwsdpfskwdd Eex Adioi Including horizontal and diagonal braces, base plates The uprights are pre-assembled (welded lattice structure) Height: 6,640 mm Depth: 870 mm

Kondisi: baik (bekas), We offer you a used rear wall mesh bracket for purchase. The scope of delivery includes: 01x Bracket for rear wall mesh, used Nsdpfx Adsgyfxpsiowi Material finish: sendzimir galvanized Dimension leg A: approx. 115 x 85 mm Dimension leg B: approx. 50 x 85 mm Rear wall mesh clearance: approx. 85 mm Slot hole size: approx. 21 x 10 mm Center-to-center hole distance: approx. 50 mm Weight per unit: approx. 0.403 kg Shipping costs upon request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Hersteller: Kaeser Kompressoren, Deutschland Baujahr: 2013 Maximaler Betriebsdruck: bis zu 13 bar Leistung: 8,26 m³/min Energieeffizienz: Der Direktantrieb in Verbindung mit IE4-Effizienzmotoren (bzw. IE5 bei SFC-Modellen) gewährleistet höchste Energieeffizienz. Nwodpfxjyy U Sho Adisi Wartungsarm: Die Komponenten sind für eine lange Lebensdauer ausgelegt und gewähren leichten Wartungszugang. SIGMA Control 2: Sorgt für effiziente Überwachung und Steuerung des Kompressors. Rotationskompressor – Schraubenkompressor, ölgeschmiert Geräuschpegel: 70 dB Abmessungen: Höhe 1900 mm, Länge 1110 mm, Breite 1760 mm Gewicht: 1250 kg Elektrische Daten: Netzspannung: 380~400 V Leistungsaufnahme: 45 kW Frequenz: 50 Hz Benutzereigenschaften: Kompressorkühlung: Wasserkühlung möglich, mit anschließender Wärmerückgewinnung. Komplettsystem betriebsbereit Vollautomatischer Betrieb Hocheffektive Schalldämmung Schwingungsisolierung Pulverbeschichtete Gehäuseteile Für Umgebungstemperaturen bis +45°C geeignet Einfache Wartung: Schmiernippel für Motorlager sind außen angebracht (auch für Lüftermotor).

Kondisi: baru, 85 degree press brake punch for Amada/Promecam R2.0mm, H145mm, L835mm, Nwsdoin I E Hepfx Adiei L835mm sectioned

Kondisi: baru, 85 Grad H220mm R0,8mm Amada/Promecam/EU-Ausführung Nwjdjqxq Nwjpfx Adisi

Kondisi: sangat baik (bekas), Generator set 85 kVA IFA – German-made Nwjdpfx Adjivtazoisi TECHNICAL SPECIFICATIONS: • Fuel: Diesel • Engine: IFA 6VD14,5/12/2SRW • Alternator: VEB DGA 68/5 • Engine power: 68 kW • Maximum generator output: 85 kVA • Engine cooling: Water-cooled • Number of cylinders: Six-cylinder • Dimensions (L/W/H): 270 / 120 / 210 cm • Weight: 1,300 kg

Kondisi: baik (bekas), Tahun pembuatan: 1997, Mesin peledakan pasir SGT Strahlmaschinen SS-85 Tahun: 1997 Dilengkapi dengan sistem putar komponen. Dilengkapi dengan sistem penyedot debu. Nwodpfx Ajznl Dnjdiei Mesin dalam kondisi siap pakai di gudang kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Nomor katalog 7809 DATA TEKNIS - kekuatan penekanan: hidrolik - bentuk briket: bulat - diameter briket: 70 mm - diameter tangki: 900 mm - pengoperasian mesin otomatis - jendela inspeksi pada corong mesin - dilengkapi pemanas oli tambahan - motor: 5,5 kW - dimensi panjang/lebar/tinggi: 1600x1200x1500 mm - berat: 685 kg Nwjdpfjzmfuwjx Adiji KEUNGGULAN – tanpa cat – produksi Italia – dilengkapi pemanas oli tambahan – mesin briket bekas – kondisi sangat baik Harga netto: 36.900 PLN Harga netto: 8.786 EUR sesuai kurs 4,20 EUR (Harga dapat berubah tergantung fluktuasi nilai tukar)

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 4.295 h, 2008 | Genie S-85 | Platform Kerja Artikulasi Bekas | 4295 jam 📍Lokasi: Jerman 🚛 Pengiriman tersedia ke lokasi Anda – Gunakan kalkulator pengiriman kami untuk memperkirakan biaya transportasi! 💰 Beli Sekarang seharga 26.000 EUR atau Ajukan Penawaran. Pembayaran saat pengiriman tersedia dengan biaya terjangkau (tergantung persetujuan)* 👷‍♂️ Diperiksa oleh ahli independen 46 poin inspeksi, 42 disetujui ✅, 4 tidak sempurna ℹ️, 0 masalah ⚠️ 📌 Komentar Inspektur: Semua fungsi berfungsi dengan baik. Keausan pada lengan derek terlihat jelas – sudah ada kelonggaran yang cukup besar. Tidak ada pelat nama yang terlihat. 📄 Ingin melihat hasil inspeksi lengkap, foto tambahan, atau video? Tips: Referensi "40826 Equippo" biasanya digunakan saat mencari detail lebih lanjut secara daring. 💡 Mengapa mesin ini dan layanan kami istimewa: ✔ Inspeksi menyeluruh oleh para profesional ✔ Pengiriman ke lokasi kerja tersedia ✔ Jaminan Uang Kembali ✔ Opsi pembayaran yang aman dan fleksibel 🔄 Apakah Anda mempertimbangkan opsi peralatan lain? Kami menawarkan alat dan sumber daya yang bermanfaat untuk semua pemilik dan operator peralatan – mudah diakses di platform kami. Nwjdpfxjzma H Ij Adioi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, pendaftaran pertama: 12/2014, jenis bahan bakar: diesel, kelas emisi: Euro 6, Tahun pembuatan: 2014, daya: 340 kW (462,27 hp), Perlengkapan: ABS, kantung udara, pendingin udara, retarder, spoiler,

Kondisi: baru, Tahun pembuatan: 2026, Genie S85XC diesel all-wheel drive telescopic boom lift, new, used, and demo machines available Nodpfevm U S Asx Adiowi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pengeboran meja horizontal dengan penyangga dan tampilan digital 3 sumbu Produsen: Collet & Engelhard Tipe: BFb 85 n Jarak gerakan X: 2400 mm Y: 1000 mm Z: 750 mm Luas permukaan penjepit yang dapat digunakan: 900 x 1400 mm Diameter spindel: 100 mm Pemasangan perkakas: ISA 50 Kecepatan putar: 6 - 1250 RPM Daya penggerak: 7,5 kW Catu daya: 380 V, 50 Hz, arus bolak-balik tiga fase. Nsdozpfy Eopfx Adiswi

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 85°-775-550 IR600 RA1658 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery, but are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out due to their performance and reliability. Thanks to a low-tension drive across the full belt width, long operating times are effortless. Tapered rollers and a specially developed belt guidance system ensure the highest possible running smoothness. Technical data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 1703 mm Frame width (NB): 775 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 85° degrees Incline: 175 mm / 85° degrees = 741.2 mm / revolution (360°) Support legs: optionally available Conveying speed (v m/s): adjustable up/down with frequency converter Drive: SEW geared motor with brake SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Optionally available: Support legs Side guides (single-sided and double-sided) Nwodok Abfbspfx Adiji Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Kondisi: baik (bekas), Cangkram tiga rahang, cangkram putar tiga rahang Njdpfxezlcu Ss Adiswi -Produsen: FD Friedrich Deckel, ukuran cangkram tiga rahang Ø 85 mm -Lingkaran lubang: Ø 73 mm / M5 -Diameter lubang tengah: Ø 16 mm -Dimensi: Ø 85 x 53 mm -Berat: 1,4 kg

Kondisi: bekas, Mesin Bekas Nodpfx Adezlbtteiswi Perlengkapan dan Data Teknis: - Mesin strapping palet semi-otomatis JN-85 PS - Mesin strapping palet semi-otomatis ini cocok untuk berbagai kebutuhan pengemasan dan merupakan pilihan serbaguna untuk banyak sektor, termasuk logistik, manufaktur, dan ritel. Mesin ini memenuhi berbagai kebutuhan dalam pengemasan barang di atas palet. - Desain mobile pada model ini memberikan kenyamanan dalam pengoperasian, terutama di area kerja sempit dengan alat angkat manual yang tidak dapat dijangkau oleh crane. - Desain yang dapat dipindahkan memberikan fleksibilitas penggunaan, sehingga mesin ini dapat digunakan di ruang terbatas di mana mesin lain tidak muat, sehingga pemanfaatan ruang kerja menjadi maksimal. - Mesin strapping palet semi-otomatis ini merupakan alat yang sangat penting dalam industri pengemasan dan dirancang untuk mengoptimalkan serta merampingkan proses pengamanan barang di atas palet. Dengan meningkatnya permintaan solusi pengemasan yang efisien, investasi pada mesin seperti ini dapat secara signifikan memengaruhi produktivitas dan efisiensi operasional. - Panjang pemandu tali strapping: 1000 mm (standar) - Ketinggian pengemasan minimum: 550 mm - Motor: 1,23 kW / 230 V Ketersediaan: segera Lokasi penyimpanan: 63934 Röllbach

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, Minipack Replay 85 EVO Minipack Replay 85 EVO adalah mesin pembungkus shrink film manual tipe beroda dengan penutup untuk produk berukuran besar dan format kemasan yang lebih besar. – Mesin pembungkus shrink film manual beroda dengan penutup – Kapasitas hingga 300 unit per jam – Dimensi area penyegelan: 840 × 590 mm – Dimensi maksimal produk: 800 × 590 × 300 mm Nwjdpfxjx Tr R Uj Adioi – Dimensi maksimal roll film: Ø 300 × 800 mm – Tinggi meja kerja: 940 mm – Dimensi mesin (tertutup): 1.950 × 1.000 × 1.180 mm – Dimensi mesin (terbuka): 1.950 × 1.000 × 1.480 mm – Berat mesin (netto/bruto): 212 / 264 kg