Wadah tekan

Compoman K1812/20 / PRESS CONTAINER / 20M3

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Press container, 20 cbm usable volume for roll-off tippers Aventek RM20 Year of manufacture: 2013 Multiple units available Knjdpfxowifivo Aabed Refurbished, inspected, serviced Large feed opening Split lid, opens left/right Pick-up from both sides Side-hinged discharge door Ramp operation possible The machines are refurbished, inspected, serviced, and repainted in the RAL standard color of your choice. We are happy to provide an offer including delivery.

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 20.580 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, arus masuk: 59 A, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.750 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), lebar transportasi: 2.300 mm, panjang transportasi: 8.500 mm, kapasitas tangki: 300 l,

Kondisi: bekas, Demag KBK 1 Suspension Crane System Year of construction: approx. 2000 Monorail suspension crane system with single-girder crane bridge Knodjhrkrtspfx Aabod Light crane system made from KBK modular profile system Rated capacity: 125 kg Span: 5 meters Distance between longitudinal rails: 4.1 meters Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal rail profile = KBK1 Comprising: - 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) - 1 trolley for crane suspension - 2 double trolleys for longitudinal rails - 10 bolt clamps for crane suspension or ceiling mounting (without beam clamps) - 6 end caps suitable for KBK1 rails

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control Kjdpju Thypefx Aabsnd – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: siap digunakan (bekas), Baler HSM V-Press 860 year 2005–2009 price 5,600 EUR Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening (W x H): 1195 x 650 mm Bale size (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Strapping material: wire Material to be pressed: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, styrofoam HSM V-Press 860 plus baler year 2013–2015 price 7,500 EUR HSM V-Press 860 L baler year 2015 price 9,000 EUR HSM V-Press 860 plus baler year 2019 price 9,000 EUR HSM V-Press 860 demo baler year 2020 price 13,000 EUR 4-fold bale strapping with wire Kjdpfx Aaera Rbgobsnd Bale dimensions (L x W x H mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data: Dimensions (L x W x H mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler year 2020 price 14,000 EUR Pressing force: 594 kN Voltage/frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Strapping material: wire Material to be pressed: film, cardboard Idle cycle time: 25 s

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical specifications for the document shredding plant: Manufacturer: HSM GmbH + Co KG General information on the two-stage shredder system: Type: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 hours Throughput capacity: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 - 53 mm Fuse protection: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Working width of cutting unit: 500 mm Particle size: 20 x 155 mm (W x L) Rated power pre-shredder: 2 x 5.5 kW Rated current pre-shredder: 2 x 11.5 A Secondary shredder data: Shredder type: P 500.2 Working width of cutting unit: 500 mm Particle size: 6 x 40 – 53 mm (W x L) Kodpjwrybrsfx Aabsnd Rated power secondary shredder: 9.2 kW Rated current secondary shredder: 18 A Security level per DIN 66399: P-3, O-2, T-3, E-2 Baler data: Type: KP 100.1 Year of manufacture: 2015 Operating hours: 2,377 hours Pressing force: 9 - 12 t Bale weight: 40 – 150 kg/bale, material-dependent Cycle time: 7 – 16 seconds Feed opening dimensions: 450 x 580 mm Bale dimensions: 630 x 500 x 400-1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3990 x 2225 x 1735 mm (L x W x H) Baler weight: approx. 1,000 kg Overall system dimensions (conveyor belt, shredder, and baler): 9560 x 2071 x 3550 mm (L x W x H) Functional description: This is a complete system consisting of a feed conveyor belt, a two-stage shredding system, and a horizontal baler. Material is fed via the conveyor belt, shredded in two steps, and subsequently pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: Complete documentation (operating instructions, electrical/hydraulic circuit diagrams) is available. Inspection by appointment is possible. No liability is assumed for technical information or possible errors.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Leistung: 150–180 kg/h Motor: 11 kW Spannung: 400 V Frequenz: 50 Hz Knedpekt Rcmjfx Aabjd Gewicht: 1,5 t

Kondisi: diremaj di bengkel (bekas), MAREL + SCANVAEGT WEIGHERS Knsdogfvbqopfx Aabod ID.NO. 1654 2x complete multihead weighers from Marel / Scanvaegt, including platform, 14 weigh hoppers, conveyor belts, vibratory feeders, platform, distribution tools for packaging into deep trays. Previously used for packing salami, but suitable for many other products such as vegetables, cheese, fish, and more.

Kondisi: baik (bekas), Tahun pembuatan: 2011, de25f2a8-70b9-4e22-9cdd-797d1fd86a66 Kodpforgpqrjx Aabjnd

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side Ksdpfxefivhfs Aabsnd - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!