Ketel uap

COMPTER CFC 1000

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group Blodpfx Aew Sy T Hea Ujd - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Bsdpfx Aswbh Ifoa Uold An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle Bledpfxsh Ayyqo Aa Ued - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Blsdpjftdv Ujfx Aa Usd Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Gebrauchte Schenck Auswuchtmaschine HU 9 T mit gebrauchtem Messgerät CAB 690 H. Die Maschine wird mit den originalen Fundamentzeichnungen, Dokumentationen und Handbüchern geliefert. Ein Probelauf der Maschine ist in Kerava möglich. Technische Daten: - Maximales Rotorgewicht mit Rollenlagern: 50.000 kg - Maximales Gewicht für symmetrischen Rotor: 56.000 kg - Tragfähigkeit pro Lagerbock: 28.000 kg - Tragfähigkeit pro T-Nuten-Bock: 28.000 kg - Minimales Rotorgewicht: 2.500 kg (1.000 kg) - Maximaler Durchmesser über Maschinenbett: 4.000 mm - Maschinenbettlänge: 15.000 mm - Einstellbare Rollenlagerdurchmesser: 125–270 mm, 450–900 mm Bsdpfsw Aaugox Aa Uold - ABB Elektroantrieb FC: 90 kW - 4-Gang-Getriebe: ca. 120–1400 U/min - Pneumatische Verriegelung für Stirnantrieb - Elektrisch verfahrbare Lagerböcke - Genauigkeit: Umar 0,5 gmm/kg bei 270 U/min 1.000 gmm

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), 2 unit pompa sentrifugal Produsen: KSB Model: WKF 50/7 Kapasitas aliran: 5,5 l/s (19,8 m³/jam) Tinggi tekan: 214 meter (21,4 bar) Suhu maksimum: 130°C Seal: Mechanical seal dengan koneksi air pembersih Motor listrik: VEM Daya penggerak: 30 kW Bedpfx Aeibwarja Usld Kecepatan putar: 2935 rpm ! Harga per unit !

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, Torwegge multi-blade saw Chain width: 250 mm Cutting height: 100 mm Total connected load: 39 kW Blodpfx Aeucnuksa Ujd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, R2ru7mxt2v Bljdpfx Aaotu T I Us Usd

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Bljdpowtgcxofx Aa Uod Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021102613, Aluminum angle conveyor belt with substructure Conveyor belt length: 2000mm flat + 2200mm inclined Incline angle at bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matte Belt width: 500mm 21 pcs. T30 cleats welded – pitch 310mm Bedpsh Eld Esfx Aa Usld * Antistatic due to threads in the running side fabric Endless welded with stepped finger splice 40mm wave edge on both sides, high-frequency welded * Edge-free zone on both sides for belt tracking on the incline Continuous support plate Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional frequency inverter control Connection 220/400V, 50Hz, protection class IP54