Membeli mesin bekas (275)

Kondisi: baru, Tahun pembuatan: 2026, Weima single-shaft shredder type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connected load: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Iedpfxeh Eiw Is Ahustl - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V-rotor (patented) with profile-milled knife pockets - Gear end switch - Pressure strip - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Kondisi: baru, Tahun pembuatan: 2026, en-001 Itsdpoh Hnp Defx Ahujl

Kondisi: baru, Tahun pembuatan: 2026, Optimum metal band saw OPTIsaw S 275NV Metal band saws with swiveling saw bow. S 275NV with infinitely variable saw band speed. Article number: 3300265 TECHNICAL DATA Dimensions and Weight Itedpfxegx T I Uo Ahuel Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Net Weight approx. 185 kg Max. Width/Depth (product) approx. 985 mm Max. Height (product) approx. 1700 mm Electrical Data Drive motor power: 1.5 kW Connection voltage: 230V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine Data Saw band speed(s): 20–90 m/min Saw band length: 2480 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Mitre angle: 0 – 60° Feed: infinitely variable Lifting of saw bow: manual Cutting Capacities Cutting capacity 0° round (solid): 225 mm Cutting capacity 0° square (solid): 190 mm Cutting capacity 0° rectangular horizontal (solid): 150 x 245 mm Cutting capacity +45° round (solid): 145 mm Cutting capacity +45° square (solid): 150 mm Cutting capacity +45° rectangular horizontal (solid): 190 x 150 mm Cutting capacity +60° round (solid): 90 mm Cutting capacity +60° square (solid): 90 mm Cutting capacity +60° rectangular horizontal (solid): 120 x 90 mm Note on Cutting Capacity: The stated cutting capacities are determined using aluminum due to the saw bow weight. Capacities may vary with different materials and can be lower in certain cases (not the maximum cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw band Machine base Coolant pump Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Heavy-duty construction of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop impact switch Drill depth stop Integrated LED work light in the drill head Precisely machined, stable drill table with diagonally arranged T-slots with a surrounding coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt guard with safety switch Precision spindle bore Machine control safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured at the drill spindle Thick-walled steel column for high load capacity and stability Massive, large-sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Work surface length 355 mm Work surface width 355 mm T-slot type diagonal T-slot size 14 mm T-slot number 2 Rotation 360 ° Tilt 45 ° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 rpm Number of speed ranges 9 Electrical data Rated voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Work surface length 230 mm Work surface width 300 mm T-slot size 16 mm Isdpeg Uaiujfx Ahujtl T-slot number 2 Spindle Quill stroke 125 mm Spindle taper MK 4 Throat 270 mm Location: From stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Iodegf Sw Nepfx Ahuotl Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Iedpjpgkmwsfx Ahujtl Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, en-martin-dickenhobelmaschine-t45-xplane Ijdoqlck Nopfx Ahustl

Kondisi: baru, Tahun pembuatan: 2024, Hoku Houfek Long Hole Boring Machine LLB VD 20 R Excellent condition – Top machine – Motor: 1.5/1.9 kW Cross travel Y-axis: 250 mm Longitudinal travel X: 340 mm Vertical travel Z-axis: 200 mm 2 speeds: 1,440 and 2,880 rpm Itodpfx Aeu Agzxohujl Single-hand dowel boring system with divisions 16 - 22 - 25 - 32 mm 2 manual eccentric clamps Manual digital display for drill height Table dimensions: 700 x 400 mm Drill chuck max. diameter: 20 mm Table rotatable +/- 45° Weight approx. 345 kg Available immediately from stock 54634 Bitburg Subject to prior sale,

Kondisi: baru, Tahun pembuatan: 2026, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Itjdpfeih Dwvsx Ahusl Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Holzkraft Combined Planer-Thicknesser Machine - Immediately Available - Ideal for demanding craftsmen and joiners The particularly long jointer tables made from a single piece enable easy planing of workpieces The worktables are made of cast iron, making them resistant and permanently flat Jointer tables open simultaneously to the rear with spring support for quick and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time The helically grooved steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknesser outlet provides consistent wood extraction Material feed with four speeds Thicknessing table height adjustment via handwheel with integrated thickness scale DIGITAL version: with electric thicknessing table height adjustment and digital display On/Off switch in operator position Iodpeih Dxdefx Ahujtl Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Provision for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length 2250 mm Max. cutting depth 5 mm Fence length 1200 mm Fence height 150 mm Dust Extraction Connection Extraction port diameter thicknesser 1 x 120 mm Drive Power Main motor 7 kW Installation Information Required space length 2250 mm Required space width/depth 1440 mm Note: The specified dimensions account for the maximum travel paths or usable lengths. Thicknesser Thicknessing table length 850 mm Thicknessing table width 520 mm Min. working height 3 mm Max. working height 240 mm Min. working length 220 mm Max. cutting depth 5 mm Electrical Data Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Max. planing width 520 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately Available -

Kondisi: baru, Tahun pembuatan: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput rates of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foam materials, light metals, paper, or biomass. Numerous additional options are available, such as an oil cooler for multi-shift operation. All machines are available in left- or right-hand configurations. Installation on a solid base frame ensures rapid setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control To fulfill our performance promise, all control cabinets are designed and manufactured in-house at our Ilsfeld facility and equipped with high-quality international components. This guarantees top quality with a compact design. The Siemens PLC used is perfectly tailored to the requirements of the briquetting process. Contaminant-resistant feed screw via cardanic suspension The feed screw, which conveys the material into the pre-compressor of the briquetting press, is suspended by a cardan joint. This prevents contaminants from causing damage to the feed screw. As always, the specific application dictates the appropriate suspension. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Ijdpfx Aoil Hggohuotl Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), Robust and compact bridge saw with fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Specially designed carrier for maximum cutting precision; Water collection tray with integrated water circulation system for blade cooling; Itjdpfx Aoi Akvvohujl Sturdy and compact construction. Roller track at the front Roller track at the rear Blade size: 350 mm Motor power: 2 kW Voltage: 230 Volts Weight: 173 kg Mobile Location: Ex-stock 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2026, Hebrock F 5 Jika Anda menginginkan kinerja maksimal, Hebrock F 5 adalah solusi untuk proses pelapisan tepi pada bengkel kerajinan yang membutuhkan standar tinggi. F 5 menjamin pemrosesan tepi pada setiap langkah, karena dilengkapi dengan semua komponen yang Anda butuhkan untuk memenuhi kebutuhan Anda: mesin penggiling sambungan, mesin pemotong, unit penggiling, pisau pelapis radius, mesin penggiling sudut, pisau pelapis permukaan, stasiun pemoles. Untuk fleksibilitas yang lebih besar dalam mencapai hasil akhir yang sempurna, F 5 dapat dilengkapi secara opsional dengan pisau pelapis multi-radius yang praktis. Ketebalan tepi maks.: 3 mm Ketebalan benda kerja maks.: 50 mm Siap digunakan dalam 3,5 menit Peralatan: Hebrock F5 Next - 10 m/menit Mesin pelapis tepi F5 Next Dengan kontrol SPS (termasuk layar sentuh) dan dengan pemberian lem panas pada benda kerja untuk bahan tepi hingga 3 mm; mesin penggiling sambungan (termasuk alat berlian) hingga kedalaman penggilingan 2 mm, bak lem tanpa perawatan dengan persiapan bak pengganti termasuk perangkat pembuangan lem, stasiun pemotong HF (sekitar 12.000 RPM), stasiun penggiling HF (sekitar 12.000 RPM) dengan penyetelan penggiling pneumatik terpisah dan pisau penggiling pelat yang dapat diganti (versi kombinasi), mesin penggiling sudut, pisau pelapis radius, pisau pelapis permukaan (termasuk pengeluaran pneumatik), stasiun pemoles, penggerak rantai yang kuat, tekanan atas ganda dengan bantalan bola, jendela pandang dari bagian belakang mesin, penopang benda kerja yang dapat ditarik, kecepatan umpan sekitar 10 m/menit. Hebrock F5 F5/08/4 Persiapan penggantian cepat untuk mesin penggiling sudut F5/08/5 motor pengganti tambahan untuk mesin penggiling sudut dengan perlengkapan alat F5/09/4 Pisau pelapis multi-radius (R1/R2) F5/10 Rangka F5/14 bak pengganti tambahan F5/24/1 Perangkat penyemprotan agen pelepas F5/24/2 Perangkat penyemprotan agen pembersih Iedoi Anadjpfx Ahujtl F5/25 Perangkat penyemprotan tepi F5/27 Sarang untuk mesin penggiling dan pisau pelapis radius F6/28 Penyemprotan tekstur akhir F5/30 Penyetelan pneumatik 3 titik (penggilingan radius, miring, rata) F5/31 Penyambungan hingga 50 mm F5/32 Lampu LED Lokasi: Tersedia di gudang 54634 Bitburg Tersedia segera - ada di gudang

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Surfacing and thickness planer Holzkraft FS 30 Classic Tersa Itjdpfx Ajbuldyehujl with Tersa cutter block and planer blades - quick-change system The Tersa planer blade system enables blade changes within seconds and ensures especially quiet operation. Helical serrated steel feed roller for constant and uniform wood feed Extra-long surfacing tables Large surfacing fence can remain in position when opening the surfacing tables. Surfacing tables open to the rear High machine weight Powerful industrial motor Sturdy steel and cast iron construction Total table length: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. depth of cut: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa planer cutter block, anodized surfacing fence Available ex-stock Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Paint Mist Extraction Unit AL-KO Colour Jet 1 Paint mist extraction unit, ready for operation, 1 m² filter area with pre-filter and fine filter, connection diameter 300 mm, motor 1.5 kW ex (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and throttle valve. Compact, space-saving sheet steel construction Chassis with wheels Indirect extraction near the floor Fully pre-assembled With connection cable and phase reversal device Adjustable side panels Optimized spray mist capture via patented front hood Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust nozzle with integrated throttle valve Motor power: 1.5 kW Speed: 1400 rpm Rated airflow: 4600 m³/h Isdpfxebumr Se Ahuetl Pressure: 500 Pa Dimensions: (W*H*D) 1025*1437*1214 mm; width 2000 mm with side panels Filter surface area: 1 m² Weight: 175 kg

Kondisi: baru, Tahun pembuatan: 2025, CASADEI PFS 520 - Surface and thickness planer with 520 mm planing width and motorized thickness table adjustment Robust steel and grey cast iron construction Large, ribbed jointer tables made of grey cast iron, stress-relieved to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutter block with precision bearings Helically geared steel infeed roller for especially even and gentle wood feed Outfeed roller with rubber coating Large planing fence, tiltable 90°–45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutter block: Cutter knives can be changed within seconds When the machine starts, the centrifugal force automatically tensions the knives – self-locking The knife projection adjusts itself automatically without any manual setting or screwing The jointer table is adjusted via a robust and precisely guided parallelogram system, ensuring the distance between the table lips and cutter block remains constant in every position The sturdy aluminum planing fence is anodized as standard, easy to move, and provides a large support area The adjustable tilt from 90° to 45° is easily visible from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Isdpfx Ahobxz S Houstl Image shows optional equipment The extraction port position remains the same for both surfacing and thickness planing modes Thus, no further extraction hose or cumbersome replugging and routing around the machine is necessary. Technical Data Total length of jointer tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Planing fence dimensions: 1200 x 190 mm Planing fence tilt range: 90–45° Min./max. planing height: 3/250 mm Cutter block diameter/number of knives: 100 mm / 4 pcs Feed speed: 5/8/12/18 m/min Cutter block speed: 5000 rpm Motor rating: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Kondisi: baru, Tahun pembuatan: 2026, Variable adjustable paint rotary table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Isdpjbzmagefx Ahuotl Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality Can be shipped by UPS by us. Requires assembly upon delivery. Location: ex stock Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Ijdpfx Aecnw T Ishuetl Article number: 5131620 Brand: Holzkraft Designed for wood chips and wood dust. Engineered for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation Application Area Clean air extraction systems for wood chips and wood dust Specifically designed for commercial environments Suitable for all woodworking machines with a matching extraction port diameter Can also be used for multiple dust sources High-quality, well-thought-out construction Rugged and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, ensuring versatile use Large inspection openings Large-capacity, mobile chip containers with clamp lever and chip collection bag Unit comes fully assembled upon delivery, allowing for immediate use Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made from polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic version, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control box Fan positioned downstream of the filter Equipment Details: Featuring innovative locking mechanism for secure container positioning All units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³ Scope of Delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with brakes Manual cleaning Model RLA 160 Article No. 5131620 Technical Data Suction port diameter: 160 mm Nominal airflow: 1,448 m³/h Maximum airflow: 2,400 m³/h Negative pressure at nominal airflow: 2,247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (

Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Itsdpfxscnxa Ss Ahusl Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Model No. 5500557

Kondisi: baru, Tahun pembuatan: 2026, TBS - Manual Guillotine Shears Manual Guillotine Shear Suitable for cutting structural steel, aluminium, copper, zinc, and plastic Itedpscnxc Refx Ahuol High-quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support table featuring a scale and an adjustable rear gauge Table height: 800 mm Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical Data Max. working width: 2000 mm Max. sheet thickness – material tensile strength 400N/mm²: 1.25 mm Rear gauge range: 0-300 mm Weight: 511 kg Dimensions (mm): 2450 x 1100 x 1050 mm

Tahun pembuatan: 2026, Kondisi: baru, Sandblasting Cabinet for Clean Blasting Operations Without Workplace Contamination Suitable for various blasting media, such as quartz, glass beads, plastic beads, and more. Ideal for cleaning, derusting, or paint removal from all types of metal parts, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Viewing window with affixed protective film ensures optimal visibility and occupational safety during workpiece processing. Dust-free operation due to continuous seals on the lid and door frames. Sturdy support grid allows for positioning of workpieces inside the cabin. With drain opening for changing blasting media. Suction pipe for blasting media fixed at the bottom of the collection container. With compressed air connection on the exterior. 2 large side doors for loading and unloading from both sides, suitable for longer workpieces. Integrated extraction unit with replaceable air filter. Airflow control via foot pedal. 2 blasting guns: one fixed and one freely movable. 3 separate switches for On/Off, extraction, and cabin lighting. 2 fluorescent tubes (230 Volt) in a separate housing with protective glass and replaceable protective film, including 5 spare films. Operating pressure adjustable via pressure regulator with manometer. Scope of delivery: - High-quality blasting gun with ceramic nozzle - 4 ceramic nozzles (4 / 5 / 6 / 7 mm) - 5 replacement protective films for viewing window Technical Data Cabin volume: 310 l Air consumption: 200 - 350 l/min Operating pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Abrasive media core size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight: [information missing] Max. operating pressure: 8.6 bar Location: Arriving soon at stock 54634 Bitburg Itjdpfscqm Rrox Ahuol

Tahun pembuatan: 2026, Kondisi: baru, Sandblasting cabinets for clean blasting operations without contamination of the working environment. Suitable for a variety of blasting media, such as quartz, glass beads, plastic beads, among others. Ideal for cleaning, derusting, or paint removal from all types of metal parts, e.g. engine components, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Viewing window with protective film applied for optimal visibility and work safety during workpiece processing. Dust-free operation thanks to continuous seals on lid and door frames. Sturdy support grid allows placement of workpieces inside the cabin. With drain opening for changing blasting media. Suction tube for blasting media fixed at the bottom of the collection container. With compressed air connection on the outside. Very large, upward-opening front flap with gas pressure springs for quick and easy loading and unloading. Integrated extraction unit with replaceable air filter. Blasting gun without trigger—airflow is controlled via foot pedal. 4 fluorescent tubes (230 volts), in separate housing with protective glass and replaceable protective film, including 5 spare films. 2 separate switches for extraction and cabin lighting. Working pressure adjustable via pressure regulator with manometer. Cross struts on the support legs allow easy transport by pallet truck. Scope of delivery: - High-quality blasting gun with ceramic nozzle - 4 ceramic nozzles (4 / 5 / 6 / 7 mm) - Including 5 replacement protective films for the viewing window Technical Data: - Working chamber volume: 825 l - Air consumption: 400–800 l/min - Working pressure: 3.4–8.0 bar - Compressed air connection: 3/8" - Blasting media particle size: 0.42–0.125 mm - Internal dimensions: 1160 x 870 x 850 mm - External dimensions: 1180 x 900 x 1760 mm - Weight: [data not provided] - Max. working pressure: 8.6 bar Iedpecqm Rwjfx Ahuotl Location: Arriving at warehouse 54634 Bitburg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The outstanding advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture window with airflow baffles – making it suitable for larger workpieces. Paint mist separation efficiency up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in long filter service life! Simple and quick front-side filter change. Cost-effective replacement filters. Low acquisition cost and extremely low energy consumption. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter, and fiberglass filter for secondary filtration. Ex-fan with throttle valve mounted on the left. Isdpedqc U Hjfx Ahustl Don’t compromise on surface quality. Easy Paint extraction walls are the ideal cost-effective solution for efficient paint mist capture and filtration, as well as extraction of solvent fumes. Robust and powerful, yet economical to run. The IPE double filtration system ensures two filter stages for a maximum separation rate of up to 99%. Thanks to the pleated filter pockets, the cardboard labyrinth pre-filter captures significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats. The downstream fiberglass secondary filter only captures the finest residual particles. As a guideline for the cardboard labyrinth filter, depending on the type of paint used, a service life of approximately 150 to 200 painting hours can be expected. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e., every 5th or 6th cardboard filter change. Easy Paint also features a lower intake opening to safely and quickly capture solvent vapors at floor level or from floor pits. With this bottom intake opening, the Easy Paint can be connected to a floor pit or tray for underfloor extraction. The front-side filter cassette also makes filter changes easy in this configuration. Standard Extraction Capacity Easy Paint 7000 Article No. 600027 Airflow (standard delivery)* 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Extraction pipe connection D = 355 mm Width (mm) 2845 Overall height (mm) 1955 Depth (mm) with capture window 1015 Weight (kg) 180 Location: ex-stock Bitburg Ex-display machine at special price

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Iedpjdqzh Refx Ahuotl Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, en Itedpfsdqzh Tex Ahuol