Membeli mesin bekas (278)

Kondisi: baru, Tahun pembuatan: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° Rotatable Extraction Module Gsdpfx Agjhk S Sts Rouk For milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction module allows extraction guidance from below or above Robust metal impeller Standard high-quality undercarriage for enhanced stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 2 x 290 l Outer diameter, extraction inlet: 260 mm Outer diameter, extraction outlets: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/Depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data No-load speed: 2950 min⁻¹ Rated power input: 4.8 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 5.98 m² Noise Emission Max. sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Max. negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip bags Location: Ex stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, Raw Air Extraction Unit ASA 141 Guodpehk S Swsfx Ag Rok With standard chassis Dimensions and Weights Chip Collection Volume 175 l Nominal Diameter Extraction Port (inlet) 140 mm Length approx. 1062 mm Width/Depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical Data Supply Voltage 230 V Mains Frequency 50 Hz Filter Filter Surface Area 1.9 m² Noise Emission Max. Sound Pressure Level 78 dB(A) Airflow Nominal Airflow Rate 1650 m³/h For chips from milling, planing, and sawing (not suitable for dust) Significantly reduced dust content due to BIA-certified filter material with a high separation rate Housing components and impellers made from high-strength special plastic Quick-release fasteners for filter and chip bags enable easy maintenance Robust, high-quality construction Easy to maneuver thanks to swivel casters Low power consumption Extraction meets dust class L requirements Scope of Delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Gsdpfxjhp Rcyo Ag Rouk Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm INCLUDED ACCESSORIES Curved workpiece guard Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: baru, Tahun pembuatan: 2025, Edge sanding machine with overhead feed unit Gsdpfxohqb Rce Ag Rsuk What sets the Uniq-S apart from the Uniq is the feed system integrated into the machine table, which features a rubberized feed belt and an overhead pressure beam. This configuration significantly facilitates the sanding and production of beveled and chamfered edges, as well as serial sanding of workpieces. It also assists when processing exceptionally large or small components. The feed speed is continuously variable between 3 and 15 m/min. A soft conveyor belt on the bottom and rubberized rollers on the top pressure beam ensure careful material handling. An optional second, bottom-mounted conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is especially beneficial when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of all operations—from solid wood to fine veneer edges at high quality. The continuously adjustable feed speed allows optimal adaptation to the material. 1. Sanding station: "Veneer side" 2. Sanding station "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semi-circular table" Location: Available from stock, 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput rates of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foam materials, light metals, paper, or biomass. Numerous additional options are available, such as an oil cooler for multi-shift operation. All machines are available in left- or right-hand configurations. Installation on a solid base frame ensures rapid setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control To fulfill our performance promise, all control cabinets are designed and manufactured in-house at our Ilsfeld facility and equipped with high-quality international components. This guarantees top quality with a compact design. The Siemens PLC used is perfectly tailored to the requirements of the briquetting process. Contaminant-resistant feed screw via cardanic suspension The feed screw, which conveys the material into the pre-compressor of the briquetting press, is suspended by a cardan joint. This prevents contaminants from causing damage to the feed screw. As always, the specific application dictates the appropriate suspension. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - Immediately available - Godpoil Hggofx Ag Rjuk Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 2005, Marking and spotting plate 1000 x 1000 with base frame Gujdpfx Agjwqx Axj Rek Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Martin panel saw T 77 - new stock machine - Top equipment - Double-sided tilting - Equipment: T 7710/2-a Saw unit Prex - double-sided tilting T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Rip fence table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer lighting Safe Light T777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T7704/2-a ConnectPad 12.9" / 13" T7704/20-a OtterBox Defender Case T7706/1-a ConnectApp at Classic control level Location: ex stock 54634 Bitburg - immediately available - Gjdpfx Agow D T Dks Reuk

Tahun pembuatan: 2022, Kondisi: baru, XSD310 400 Volt Weight: 280 kg Surface Planer Planing width: 310 mm Total length of planer tables: 1400 mm Cutterhead diameter: 70 mm Tersa cutterhead RPM: 5500 Planer fence dimensions: 1300 x 150 mm Planer fence tilt adjustment: 90 - 45 degrees Maximum cutting depth: 4 mm Motor power: 4 HP Thickness Planer Thickness table dimensions: 430 x 310 mm Thicknessing height: 230 mm Feed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutterhead Guedjdkl Sqepfx Ag Rek Handwheel adjustment for thickness table with mechanical display Location: In stock at 54634 Bitburg The machine is on display at our premises and available for immediate delivery.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Gjdpfx Agjgf Sw No Rouk Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: baru, Tahun pembuatan: 2025, en-Holzkraft sliding table saw with scoring unit Compact sliding table saw with tiltable saw blade and high-quality anodized aluminum sliding table Cutting area of the compact sliding table saw is located directly at the rolling table Precision-guided sliding table made of aluminum, anodized as standard Large-format table extension on telescopic arm, adjustable lengthwise Standard table extension and width extension allow easy handling of larger workpieces The large dimensioned saw assembly made of cast iron is mounted twice to the cast base and guarantees stability, precision, smooth running, and long service life Large working table made of ground cast iron, extremely robust and resistant Smooth operation and precise cuts Aluminum sliding table Tested and proven ball contact system—millions in use Dust and dirt resistant due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic fence Extendable aluminum telescopic fence Angle adjustable With two professional folding stops Gjdpeih Dwvjfx Ag Rsuk Ek2a0i2ik Parallel fence Standard with fine adjustment and quick release Scope of delivery: Table extension Table width extension Anodized aluminum sliding table Parallel fence with round bar guidance and fine adjustment Model SC 2 classic Item No. 5504215 Technical Data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut capacity: 1660 mm Maximum cutting height at 90° with scorer: 100 mm Maximum cutting height at 45° with scorer: 79 mm Maximum crosscut width left of saw blade: 1270 mm Rip width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scorer: 315 mm Saw blade diameter max. without scorer: 315 mm Scoring blade diameter (optional): 80 mm Main saw blade speed: 4000 rpm Scoring saw blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction nozzle diameter: 120 mm Extraction nozzle diameter on saw blade protector: 60 mm Weight: 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, For sawing, milling, surface/thickness planing, and optionally mortising, all in minimal space. - High-precision format sliding table made of anodized aluminum, various lengths available - Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic stop up to max. 3200 mm, equipped with professional flip stops - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Wide tilting range of the milling spindle from 90° to -45° backwards - Four spindle speeds up to 10,000 rpm, manually adjustable - Spindle can run in both clockwise and counterclockwise directions - Strongly ribbed surface planing tables made from stress-relieved grey cast iron for decades of stability and flatness - Two-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch, motor protection switch - Fixed handwheels Dimensions and Weights Weight (net) approx.: 857 kg Jointer Jointer table width: 410 mm Jointer table length: 2000 mm Max. removal per pass (jointer): 5 mm Extraction Connection Extraction port diameter: 3 x 120 mm Extraction port (blade guard): 60 mm Setup Information Required length: 5960 mm Required width/depth: 5140 mm Note on required space: Dimensions account for maximum travel paths or usable lengths. Working Area Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Please add the specified dimensions to the required space to get the recommended free installation area for the machine. Thickness Planer Thickness table length: 757 mm Thickness table width: 423 mm Min. working height: 3 mm Max. working height: 230 mm Max. removal per pass (thicknesser): 5 mm Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Motor duty cycle: S6 Motor duty cycle: 40% Motor power: 3 x 5.0 kW Sliding Table and Table Format sliding table length: 2660 mm Format sliding table width: 360 mm Format sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Milling Spindle Spindle tilt: 0 – -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. Cutter Diameter Max. retractable cutter diameter: 210 mm Max. retractable cutter diameter at 45°: 150 mm Max. tenoning cutter diameter: 275 mm Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 drum speed: 5200 rpm Circular Saw Unit Max. rip length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of the saw blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Guedjih Dxlopfx Ag Rok Max. saw blade protrusion 90°: 100 mm Max. saw blade protrusion 45°: 71 mm Main saw blade diameter: 315 mm Note: with scoring blade Main saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Optimum metal band saw OPTIsaw S 275NV Metal band saws with swiveling saw bow. S 275NV with infinitely variable saw band speed. Article number: 3300265 TECHNICAL DATA Dimensions and Weight Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Net Weight approx. 185 kg Max. Width/Depth (product) approx. 985 mm Max. Height (product) approx. 1700 mm Guodjgx T I Uspfx Ag Rek Electrical Data Drive motor power: 1.5 kW Connection voltage: 230V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine Data Saw band speed(s): 20–90 m/min Saw band length: 2480 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Mitre angle: 0 – 60° Feed: infinitely variable Lifting of saw bow: manual Cutting Capacities Cutting capacity 0° round (solid): 225 mm Cutting capacity 0° square (solid): 190 mm Cutting capacity 0° rectangular horizontal (solid): 150 x 245 mm Cutting capacity +45° round (solid): 145 mm Cutting capacity +45° square (solid): 150 mm Cutting capacity +45° rectangular horizontal (solid): 190 x 150 mm Cutting capacity +60° round (solid): 90 mm Cutting capacity +60° square (solid): 90 mm Cutting capacity +60° rectangular horizontal (solid): 120 x 90 mm Note on Cutting Capacity: The stated cutting capacities are determined using aluminum due to the saw bow weight. Capacities may vary with different materials and can be lower in certain cases (not the maximum cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw band Machine base Coolant pump Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, High-quality housing made of galvanized steel Powerful, economical motors Godpfx Aofc A Urjg Rouk Standard configuration with selectable intake connection (top or bottom) Uniform filter bags for all variants Discharge into chip collection bins The modular AL-KO AAS series models are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air side fan to generate particularly effective positive pressure filtration. Durable quality components and an all-metal housing made from galvanized steel sheet ensure long-term investment security, as do the wide range of retrofit options. The particularly attractive price and short assembly times also guarantee that the AL-KO AAS is certainly the right choice. Technical data AL-KO AAS 3013 Intake connection: 200 mm Nominal airflow: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum negative pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (LxWxH): 2486 x 578 x 2115 mm Weight: 139 kg

Kondisi: baru, Tahun pembuatan: 2025, Martin Dickenhobelmaschine T 45 with Tersa Cutterhead Godpfxoqlclbo Ag Rouk Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production. It produces smoothly planed surfaces, is quick and easy to operate, and also works extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions—your first workpiece already comes out perfectly set. Naturally, the thickness table is adjusted easily at the press of a button, or can be stepped up in 0.1 mm increments. The feed controls are conveniently placed. The heavy, vibration-damping composite frame, together with the high-quality cutterblock bearings, guarantee immaculate surface results. Its sound-insulated construction ensures a quiet working environment even in the standard configuration. • Planing width: 630 mm • Weight: approx. 1,200–1,400 kg • Planing height: 2.8–300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, max. 99 values storable (49 programmable for custom planing sequences); buttons for rapid and fine manual thickness adjustments with digital readout; push-buttons for cutterhead start/stop; built-in hour counter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; includes locking mechanism for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, table supported by 4 anti-tilt threaded spindles, finely planed table surface • Feed: Two speeds (6 / 12 m/min), electrically switchable during operation, large rubber feed rollers Ø 85 mm to compensate for varying material thickness, soft and self-cleaning rollers, easy roller replacement; segmented pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left/right (optional dual connection); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; bearings/cutterhead lubricated via grease fittings • Included accessories: 1 grease gun (filled with long-life grease), 1 oil can, 1 open-end wrench, 1 knife changing tool, 1 pair dummy knives 640 mm, 2 pairs TERSA reversible knives 640 mm CV • Emissions: - Sound pressure at operator position LpA as per DIN EN ISO 11202 [dB(A)] - Idle (without extraction) P1: 65 - Idle (with extraction) P1: 77 - Working (without extraction) P2: 65 - Working (with extraction) P2: 78 - Sound power level LWA as per DIN EN ISO 3746 [dB(A)] - Idle (without extraction): 84 - Working (with extraction): 90 • Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Double bench grinder Rema / school machine Disc dimensions (in mm): 300/40/76 Power (in kW): 1.8 Gedpfxohaf Ndj Ag Rouk Speed (rpm): 1450 Voltage: 380 Volt Lamp Safety shields Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, EVOLUTION – Precision, Ergonomics and Functionality Perfectly Combined Automatic functions, such as automatic locking and swiveling, or the automatic infeed and outfeed of the saw unit, make your daily work significantly easier. Take advantage of the benefits of the EVOLUTION series. All functions are conveniently controlled via a 12" touchscreen PC. The intuitive user interface ensures perfect execution of your jobs down to the finest detail. Comprehensive Standard Equipment - 12" touchscreen PC with optimized operator guidance - Laser-assisted display of the horizontal cut - Digital measuring system DMS-XY - Automatic saw beam locking with cut position recognition - Automatic locking and swiveling of the saw unit - Automatic infeed and outfeed of the saw unit - Automatic fine adjustment of the saw unit - Operating hours counter - Tool database - Full-length ALU center support - Integrated, high-performance TRK dust extraction. Dust limit approx. 1mg/m³ - Control cabinet mounted directly on the saw frame - Supersilent sound insulation Scoring Unit: VSA scoring saw, continuously adjustable Free-standing support, complete Paper holder High-end grid made of synthetic materials Aluminum small parts support, complete UPS 24 VDC for touch PC, uninterrupted power supply Saw Weight: approx. 1,100 kg Cutting Depth: 80 mm Saw Motor Power: 5.5 kW (7.5 HP) Saw Blade Diameter: 300 mm Saw Blade Bore: 30 mm A-weighted emission sound pressure level at workplace LpA: 83 dB *3 Saw Blade Speed: 4800 rpm 1 Extraction Port: ø 140 mm Compressed Air Connection: 6-10 bar Connected Load: 7.5 kW Power Supply: 3 x 400 V / 50 Hz Dimensions (mm): Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Gsdpfohf Dqbex Ag Rsuk Cutting Range (mm): Type LS HS (vert) HS horizontal 6224 5300 2240 2100 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 by Holzkraft For wood dust and shavings, designed for commercial use Item No.: 5131620 Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outer Diameter Extraction Connection (inlet): 160 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Air Volume Flow Rated Airflow: 1448 m³/h Dust Class: H3 Scope of Delivery: - Metal impeller - Service opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed castors and two swivel castors with locking brakes - Manual filter cleaning Item No. 5131620 Guodpfx Ashkztteg Rek Location: In stock, 54634 Bitburg - Available immediately -

Kondisi: baik (bekas), Tahun pembuatan: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift Godpevk Dqvjfx Ag Reuk - very good condition - Pneumatic clamp Turret stop Material support Pneumatic foot pedal Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Weima Wood Chipper - floor push feed - low-noise, slow-speed Kondisi sangat baik - hanya 150 jam kerja - Tipe: WL 600 Diameter poros (mm): 260 Panjang pisau (mm): 600 Kecepatan putar poros pisau (r/mnt): 80 - 125 Jumlah pisau (buah): 14 Ukuran butiran maks. (mm): 20/25 Bukaan (mm): 600 x 800 Diameter nozzle hisap (mm): 160 Daya motor (kW): 15 Tegangan (V): 400 Tinggi kerja (mm): 1645 Gjdjxiq Syspfx Ag Rouk P x L x T (mm): 1.805 x 1.118 x 1.645 Berat (kg): 1100 Lokasi: stok di 54634 Bitburg - tersedia segera - Penjualan antara waktu dimungkinkan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, bekas, kondisi baik, pemakaian rendah, perlengkapan top Gusdpfxexgu Uaj Ag Rjk Merek: Panhans Tipe: 116H Tahun pembuatan: 1995 No. mesin: 640 GS-berstandar debu kayu Pengoperasian 2 tuas Chuck bor 20 mm Perlengkapan bor dowel dengan 4 titik posisi Pembatas sudut kemiringan 45° dapat diatur tanpa langkah Dapat dipindahkan Penjepit benda kerja pneumatik 2 buah Penyetelan ketinggian pneumatik dengan pedal kaki Koneksi ekstraksi D 100 mm Kebutuhan ruang sekitar 950 mm x 1000 mm x 1300 mm Berat sekitar 200 kg Lokasi penyimpanan: 54634 Bitburg, bebas dimuat, tanpa kemasan Penyerahan dalam kondisi apa adanya seperti yang telah dilihat Tanpa jaminan dan garansi

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: MABO Model: BABY S.A.S. BABY 80 Jenis mesin: Mesin penghalus tepi Data teknis Jarak rol: 1.050 mm Lebar sabuk amplas maks.: 120 mm Jumlah tingkat kecepatan: 1 Motor utama: 1,1 kW Sabuk amplas horizontal Sabuk amplas dapat diputar Tegak ke atas Berat sekitar: 95 kg Kebutuhan ruang panjang: 2,65 m Kebutuhan ruang lebar: 0,55 m Kebutuhan ruang tinggi: 1,1 m Lokasi: stok di 54634 Bitburg Guodpfxexgvcxj Ag Rek - tersedia segera -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain Godsxvirfspfx Ag Rsuk - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Dinding pengecatan Schuko dengan unit udara masuk + plafon udara masuk Gsdpfoxvivqjx Ag Rjuk Dijual dengan harga khusus, namun harus dibongkar sendiri Data teknis: lihat foto Lokasi: dari lokasi Saarland

Kondisi: baru, Tahun pembuatan: 2025, en Gedpfoxw N Sbjx Ag Reuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, MC Biesse angle aggregate HSK 63 F with 2 outputs Manual Gedpowmtaqjfx Ag Rouk Key Collet chuck Location: ex stock 54634 Bitburg - immediately available -