Membeli mesin bekas (269)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Dcsdpfx Aascnw U Devsp Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be activated individually Highly durable rubberized feed belt Variable feed speed Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: This allows precise adjustment of the brush speed to the material, making it especially suitable for sensitive materials. Unit for saw-cut finish optionally available - Motorized height adjustment of the units - Units can be switched on individually - Feed speed steplessly adjustable Dimensions and weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Speed: 1500 rpm Electrical data Dcjdpfoff Hdgex Aavsp Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Connected load: 6.25 kW Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Noise emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding unit Max. sanding width: 300 mm Feed unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Kondisi: baru, Tahun pembuatan: 2026, Hebrock F 5 Jika Anda menginginkan kinerja maksimal, Hebrock F 5 adalah solusi untuk proses pelapisan tepi pada bengkel kerajinan yang menuntut. F 5 menjamin pemrosesan tepi di semua tahapan, karena dilengkapi dengan semua komponen yang Anda butuhkan untuk memenuhi kebutuhan Anda: mesin frais sambungan, mesin potong, unit frais, pisau penarik radius, mesin frais sudut, pisau penarik permukaan, stasiun pemoles. Untuk fleksibilitas yang lebih besar dalam mencapai hasil akhir yang sempurna, F 5 dapat dilengkapi secara opsional dengan pisau penarik multi-radius yang praktis. Ketebalan tepi maks.: 3 mm Ketebalan benda kerja maks.: 50 mm Siap digunakan dalam 3,5 menit Perlengkapan: Dcjdjlht Hwspfx Aavop Hebrock F5 Next - 10 m/menit Mesin pelapis tepi F5 Next Dengan kontrol PLC (termasuk layar sentuh) dan dengan aplikasi lem panas pada benda kerja untuk material tepi hingga 3 mm; mesin frais sambungan (termasuk alat berlian) hingga kedalaman frais 2 mm, bak lem bebas perawatan dengan perlengkapan penggantian bak termasuk perangkat pengeluaran lem, stasiun pemotongan HF (sekitar 12.000 RPM), stasiun frais HF (sekitar 12.000 RPM) dengan penyetelan frais pneumatik terpisah dan frais pelat pengganti (versi kombinasi), mesin frais sudut, pisau penarik radius, pisau penarik permukaan (termasuk penyetelan pneumatik), stasiun pemoles, penggerak rantai yang kuat, penekan rol ganda yang bantalan bola, jendela pandang dari bagian belakang mesin, penyangga benda kerja yang dapat ditarik, kecepatan umpan sekitar 10 m/menit. Hebrock F5 F5/08/4 Perlengkapan penggantian cepat mesin frais sudut F5/08/5 motor pengganti tambahan untuk mesin frais sudut dengan perlengkapan alat F5/09/4 Pisau penarik multi-radius (R1/R2) F5/10 Rangka F5/14 Bak pengganti tambahan F5/24/1 Perangkat penyemprot agen pelepas F5/24/2 Perangkat penyemprot agen pembersih F5/25. Perangkat penyemprot tepi F5/27. Penataan untuk mesin frais dan pisau penarik radius F6/28 Penyemprotan tekstur akhir F5/30. Penyetelan pneumatik 3 titik (frais radius, fase, dan rata) F5/31 Penyambungan hingga 50 mm F5/32 Pencahayaan LED Lokasi: Tersedia di gudang 54634 Bitburg -tersedia segera-

Kondisi: baru, Tahun pembuatan: 2025, Electrically adjustable thicknessing table with two speeds Numerical display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planer cutterblock Knife change in seconds When starting the machine, centrifugal force automatically tensions the planer knives – self-locking The knife projection is set automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfectly stable without locking Helical-toothed steel feed rollers ensure constant and uniform wood infeed Second, rubber-coated outfeed roller Robust anti-kickback devices prevent workpiece kickback A 4-knife cutterblock guarantees optimal planing results Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Extraction port diameter thicknesser 150 mm Drive power Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation The dimensions take into account maximum travel or working lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area Add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknesser table Thicknessing table length 630 mm Thicknessing table width 1000 mm Working height min. 3.5 mm Working height max. 300 mm Working length min. 210 mm Max. cutting depth 8 mm Electrical data Connection voltage 400 V Phase(s) 3 ph Current type AC Network frequency 50 Hz Planer cutterblock Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 4500 rpm Djdpoff Efaofx Aavjcp Max. planing width 630 mm Feed Speeds 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, AL-KO clean air dust extractor Ex-demo unit Available at a special price Technical data – Power Unit 250 P Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Vacuum: 2,451 Pa Filter surface area: 22.4 m² Chip collection bin: 2 x 250 L Dimensions (L x W x H): 2,305 x 994 x 2,351 mm Weight: 758 kg Location: Warehouse 54634 Bitburg Dcodscdr Enopfx Aavjp Subject to prior sale

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Showroom model – new Offered at a special price Technical data 300-P Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Dsdpecdrzdofx Aavjcp Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm Dodpfx Aew Sgm Heavecp - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm Dodog U Uv Rjpfx Aavecp 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), ketinggian potong (maks.): 2.240 mm, diameter mata gergaji: 303 mm, panjang pemotongan (maks.): 5.300 mm, kedalaman pemotongan: 800 mm, RINCIAN TEKNIS Panjang pemotongan: 5.300 mm Tinggi pemotongan: 2.100 / 2.240 mm Kedalaman pemotongan: 800 mm Diameter mata gergaji: 303 mm Diameter sambungan penyedot debu: 120 mm RINCIAN MESIN Daya motor: 5,5 kW Dcodpfx Aozktngoavsp Total daya terpasang: 5,5 kW Dimensi & Berat Ukuran yang dibutuhkan: 6.300 mm x 1.250 mm x 2.720 mm Berat: 1.200 kg PERALATAN Tampilan digital pada sumbu Y Dukungan tengah Pemasangan mandiri Kisi-kisi dapat dilipat Panel belakang kayu

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Dcjdpfei Am U Dex Aavep Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2026, Hebrock K 36 Top, dilengkapi dengan Pengaturan Motorik - - Mesin Baru - Mesin Hebrock yang sangat populer ini menawarkan kemungkinan yang tak terduga. Dirancang untuk memenuhi standar tertinggi, K 36 mewakili keandalan dan produktivitas mutlak dalam penggunaan sehari-hari. Dengan kemampuan untuk melengkapi mesin dengan pah bertingkat dan pisau penarik multi-radius, Hebrock menetapkan standar baru dalam bidang pemrosesan tepi yang sempurna dengan berbagai ketebalan tepi. Ketebalan tepi maks.: 3 mm Ketebalan benda kerja maks.: 60 mm Siap beroperasi dalam 6 menit. Ketebalan tepi maks. 3 mm Ketebalan benda kerja min./maks. 8 – 60 mm Dodpfoi Am Ukjx Aavecp Panjang benda kerja min. sekitar 140 mm Kecepatan umpan sekitar 15 m/menit. Siap beroperasi sekitar 6 menit. Konsumsi daya maks. Ø sekitar 7,4 kW Koneksi listrik 400 V – 3 Fase – 50 Hz Tinggi meja kerja sekitar 900 mm Dimensi mesin sekitar 5250 x 1230 x 1430 mm (PxLxT) Berat 1750 kg Peralatan: Hebrock K 36. - 15 m/menit Mesin pelapis tepi K36 Dengan kontrol PLC (termasuk layar sentuh 15”), aplikasi lem cair pada benda kerja untuk material tepi hingga 3 mm; pah penggabung (termasuk alat berlian) hingga kedalaman pemotongan 3 mm, bak lem berlapis bebas perawatan dengan persiapan bak pengganti termasuk perangkat pembuangan lem, stasiun pemotong gergaji dengan motor ganda HF (sekitar 12.000 RPM), stasiun pemotong HF (sekitar 12.000 RPM) dengan pengaturan pemotongan pneumatik dan pah pengganti (desain kombinasi), pah pembulat sudut, pisau penarik radius, pisau penarik permukaan (termasuk perangkat penggalian pneumatik), stasiun pemoles, penggerak rantai yang kokoh, penekan rol ganda dengan bantalan bola, jendela tampilan unit dari sisi belakang mesin dan sisi operator, lampu sinyal untuk urutan benda kerja, penopang benda kerja yang dapat ditarik, umpan sekitar 15 m/menit, pelapisan hingga ketebalan benda kerja 60 mm 36/08/1 Persiapan penggantian cepat untuk pah sudut 36/08/2/1 motor pengganti tambahan untuk pah sudut R=1 36/09/1 Pisau penarik multi-radius 36/24/1 Perangkat penyemprot pelumas 36/24/2 Perangkat penyemprot pembersih 36/25. Penyemprot pelindung tepi 36/27 Nesting (1 stasiun pemotong + 1 pisau penarik radius) 36/30 Pengaturan pneumatik 3 titik 36/30/1 Multitool untuk stasiun pemotong HF (R2/R1/Chamfer) 36/45 Paket poros, pengaturan motorik untuk ketebalan pelat dan tepi serta pengaturan kedalaman pah penggabung Lokasi: dari gudang 54634 Bitburg tersedia setelah perjanjian

Kondisi: baru, Tahun pembuatan: 2026, Glue Application Machine / Glue Roller Machine Brand: ORMA/Osama Model: I/213 (S2R-1300) Working width: 1,300 mm Max. workpiece height: 100 mm Feed speed: 18 m/min Working height: 900 mm Application roller diameter: 185 mm Connected load: 0.5 Hp 0.37 kW Dcodpfxed Iz Dfe Aavsp Operator side: right Electrical specification: 400 V / 50 Hz / 3 phases Technical features: - Glue application machine frame constructed from welded sheet steel - Single motor drive for both rollers - Glue application rollers coated with acid-resistant special rubber, profile-ground and grooved, wear-resistant - The thick rubber coating can be profile-ground multiple times - Special dampers on the roller supports allow for automatic roller opening to compensate for workpiece unevenness up to max. 5 mm - Glue dosing via zinc-plated distribution tray, easily removable for cleaning - Hand wheel for roller opening adjustment - Roller safety guards - Electrical components to the highest quality standards - CE compliant

Kondisi: baru, Tahun pembuatan: 2026, en_Holzkraft_Minimax_ST_5es Dcodpfx Aaod Hx Hmovop

Kondisi: baru, Tahun pembuatan: 2026, Holzkraft HBS Precision Wood Band Saws for Craftsmen — Top quality, workmanship and value for money Particularly smooth and precise operation thanks to a distortion-free machine housing. Large cast iron saw table, made from a single piece, with precisely ground and polished surface. Quick-release blade tensioning via an eccentric lever at the rear of the machine. Standard equipment includes two cutting speeds. Precise 3-roller blade guides, positioned above and below the table as standard on HBS 351 and up. Rapid cutting height adjustment via handwheel and rack with millimeter scale. Smooth-running aluminum parallel fence with quick-action excenter clamping and magnifier. Standard mitre fence, adjustable by ±60 degrees on both sides. Aluminum parallel fence with quick-action excenter clamping. Technical Data: Work table dimensions: 495 x 356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with fence: 321 mm Blade length: 2562 mm Precision 3-roller guide: above/below Table tilt: -10° to +45° Djdpfx Ajvk Sdkeavecp Motor output: 550 W / 230 V Weight: 80 kg Machine dimensions (mm): 610 x 445 x 1753 Extraction port diameter: 100 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Edge sanding machine with overhead feed unit What sets the Uniq-S apart from the Uniq is the feed system integrated into the machine table, which features a rubberized feed belt and an overhead pressure beam. This configuration significantly facilitates the sanding and production of beveled and chamfered edges, as well as serial sanding of workpieces. It also assists when processing exceptionally large or small components. The feed speed is continuously variable between 3 and 15 m/min. A soft conveyor belt on the bottom and rubberized rollers on the top pressure beam ensure careful material handling. An optional second, bottom-mounted conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is especially beneficial when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of all operations—from solid wood to fine veneer edges at high quality. The continuously adjustable feed speed allows optimal adaptation to the material. 1. Sanding station: "Veneer side" 2. Sanding station "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semi-circular table" Dcsdpfehqb Rcex Aavop Location: Available from stock, 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Rugged construction allows for machining of longer workpieces Grinding unit can be swiveled, making it suitable for use as an edge sanding machine Balanced 225 mm belt pulleys ensure low-vibration operation Easy sanding belt adjustment High belt speed of 17 m/s Dcsdpfx Aaoff Hdfovep Reversible belt direction (right/left run) Top sanding shoe with graphite coating 4-way spring-loaded sanding shoe Includes movable sanding shoe for angled-edge surfaces Smooth-running sanding table even under heavy loads from large workpieces Optimal price-performance ratio Additional ESE Equipment Standard with electric table height adjustment Split table that folds up for special edge sanding applications Drawer sanding device Integrated worktable lighting Equipment Details Large, balanced 225 mm belt pulleys ensure optimal and low-vibration drive Belt speed: 17 m/s Swiveling professional sanding shoe for inclined surfaces 4-way spring loaded Standard with electric table height adjustment Ergonomically positioned controls on a separate control panel Standard drawer sanding device Split table folds up for special edge sanding applications Dimensions and Weights Length approx. 3,750 mm Width/depth approx. 1,250 mm Height approx. 1,730 mm Weight approx. 520 kg Dust Extraction Extraction nozzle diameter: 160 / 160 mm Worktable(s) Table height adjustment: 550 mm Lateral table travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Sanding belt length: 7,000 mm Sanding belt width: 150 mm Belt speed: 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Kondisi: baru, Tahun pembuatan: 2025, 4-knife cutterblock for optimum planing results Smooth operation due to precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally available with rubber-coated roller The working table is mounted on four oversized columns, guaranteeing maximum stability under all working conditions. Thickness table adjustment via handwheel with numeric display for set planing height (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator's side Powerful industrial motor Robust steel and cast iron construction Equipment details: Deded Hx Hnjpfx Aavecp Working table Mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions Special lifting mechanism keeps the table position securely in place even without locking Tersa cutterblock No more adjusting or screwing Cutter change in seconds Self-locking Extremely quiet operation Thickness table adjustment on S 41 elite s Via handwheel with numeric display for set planing height (accurate to 0.1 mm) Dimensions and weights Length approx. 900 mm Width/depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Extraction port diameter for thicknessing: 120 mm Drive power Main motor: 5 kW Installation information Required space length: 1070 mm Required space width/depth: 900 mm Required space height: 1100 mm Note on space requirement: Dimensions take into account maximum axis travels or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Note on working area: Please add the specified values to the required space to obtain the recommended free installation area for the machine. Thicknessing table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 180 mm Maximum cutting depth: 5 mm Electrical data Connection voltage: 400 V Cutterblock Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Feed speed: 6/12 m/min

Kondisi: baru, Tahun pembuatan: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise and chip protection curtains at the workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa planer cutterhead Planer knife change in seconds When the machine starts, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles that guarantee maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains precise even without mechanical locking Dcjdpfxod Hx E Ie Aavsp Helically-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Drive Power Main motor 7.5 kW Installation Information Required space – Length 1170 mm Required space – Width/Depth 1003 mm Required space – Height 1197 mm Note on required space: The dimensions take maximum travel paths or usable lengths into account. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Note on working area: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Table Length 520 mm Width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Maximum chip removal 8 mm Electrical Data Connection voltage 400 V Planer Cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 4500 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Kondisi: baru, Tahun pembuatan: 2025, Spindle moulder type: minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment cost Article No.: 5502045 Brand: Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Net weight approx.: 290 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1000 mm Sliding table length: 1000 mm Work table width: 435 mm Sliding table width: 270 mm Table height: 900 mm Installation Information Space requirement (length): 1945 mm Machine body width/depth: 710 mm Space requirement (width/depth): 2220 mm Working area (length): 1600 mm Explanation of space requirement: Maximum travel range or effective lengths are considered in these dimensions. Working area (width/depth): 1600 mm Machine body length: 1000 mm Explanation of working area: Add the working area dimensions to the space requirement to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Main drive motor power: 5.0 kW Mains frequency: 50 Hz Spindle Spindle tilt: 0 to -45° Spindle speeds: 3500/7000/10000 rpm Usable spindle length: 100 mm Spindle shaft diameter: 30 mm Maximum spindle projection above table: 130 mm Dodpshp Rcyjfx Aavecp Maximum Cutter Diameters Maximum tool diameter (retractable): 180 mm Maximum tenoning cutter diameter: 275 mm Maximum profile cutter diameter: 210 mm INCLUDED ACCESSORIES Curved workpiece guard Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Kondisi: baru, Tahun pembuatan: 2026, Weima Hacker / Pemotong WL 8 dengan Perlengkapan Terbaik - Alas segmen 4 sisi, pengangkut spiral dengan motor roda gigi, deretan pisau ganda, spacer kayu, Hidrolik cepat untuk gerakan mundur dengan katup peredam Pemotong satu poros WL 8 adalah model klasik yang terbukti efektif untuk memotong limbah kayu dari semua jenis. Misalnya, ribuan unit digunakan di perusahaan pengolahan kayu di seluruh dunia. Jumlah unit yang tinggi dari pemotong yang sangat diminati ini menjamin teknologi yang teruji dan andal dengan rasio harga-kinerja terbaik. Mesin ini menonjol karena konstruksinya yang sangat kokoh, yang memastikan daya tahan yang sangat tinggi (bahkan di luar ruangan). Pengoperasian intuitif berkat kontrol Siemens SPS dengan tampilan sentuh Untuk memastikan bahwa elektronik disesuaikan secara optimal dengan mesin, kami merancang, membuat, dan memasang sendiri kabinet kontrol kami. Dalam proses ini, kami hanya menggunakan komponen berkualitas tinggi – misalnya dari Siemens atau Rittal. Antarmuka sentuh yang mudah digunakan menjamin penyesuaian yang cepat. Fungsi seperti pengaturan waktu atau penghentian penggeser memastikan tingkat keluaran yang tinggi. Perlindungan kelebihan beban bawaan juga mencegah kerusakan pada mesin. Tidak ada jembatan material berkat desain corong yang memungkinkan pemotongan bebas Corong ini memiliki beberapa fungsi. Melalui corong ini, material yang akan dipotong dimasukkan – secara manual, dengan mesin, atau melalui ban berjalan. Bukaan yang besar juga membuat pengisian bagian yang sangat besar menjadi nyaman. Namun, yang terpenting untuk proses pemotongan adalah desain khususnya, yang membulat di bagian depan dan dengan demikian secara efektif mencegah pembentukan jembatan material. Bahkan dengan bagian yang besar, pemotong dapat membebaskan dirinya sendiri. Jika diperlukan, perpanjangan corong dan tutup dengan pegas gas juga tersedia. Bantalan rotor yang tahan lama berkat desain terpisah Bantalan rotor harus dibangun sangat kokoh karena mengalami beban ekstrem selama operasi pemotongan. Untuk mencegah debu atau benda asing masuk ke dalamnya, kami memisahkannya dari rangka mesin. Hal ini juga membuatnya sangat mudah dirawat dan diakses. Diameter rotor (mm): 260 Panjang rotor (mm): 1000 Kecepatan putar rotor (RPM): 80 - 125 Daya (kW): 22 Jumlah pisau: 54 Ukuran pisau yang tersedia (mm): 40 x 40 Ukuran partikel (mm): Nozel hisap (mm): 200 Bukaan umpan (mm): 1000 x 1250 Panjang (mm): 2045 Lebar (mm): 1740 Tinggi (mm): 1840 Berat (kira-kira kg): 2200 Ukuran saringan: 15/20 Aksesori: - Deretan pisau ke-2 - Spacer kayu - Alas segmen 4 sisi - Pengangkut spiral dengan motor roda gigi Dcsdomhh Idjpfx Aavsp - Hidrolik cepat untuk gerakan mundur dengan katup peredam Lokasi: Tersedia di gudang 54634 Bitburg

Tahun pembuatan: 2026, Kondisi: baru, Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Dodpfed Ecc Tjx Aavecp Location: ex stock 54634 Bitburg - loaded, free of charge -

Kondisi: baru, Tahun pembuatan: 2024, EVOLUTION – Precision, Ergonomics and Functionality Perfectly Combined Automatic functions, such as automatic locking and swiveling, or the automatic infeed and outfeed of the saw unit, make your daily work significantly easier. Take advantage of the benefits of the EVOLUTION series. All functions are conveniently controlled via a 12" touchscreen PC. The intuitive user interface ensures perfect execution of your jobs down to the finest detail. Comprehensive Standard Equipment - 12" touchscreen PC with optimized operator guidance - Laser-assisted display of the horizontal cut - Digital measuring system DMS-XY - Automatic saw beam locking with cut position recognition - Automatic locking and swiveling of the saw unit - Automatic infeed and outfeed of the saw unit - Automatic fine adjustment of the saw unit - Operating hours counter - Tool database - Full-length ALU center support - Integrated, high-performance TRK dust extraction. Dust limit approx. 1mg/m³ - Control cabinet mounted directly on the saw frame - Supersilent sound insulation Scoring Unit: VSA scoring saw, continuously adjustable Free-standing support, complete Paper holder High-end grid made of synthetic materials Aluminum small parts support, complete UPS 24 VDC for touch PC, uninterrupted power supply Saw Weight: approx. 1,100 kg Cutting Depth: 80 mm Saw Motor Power: 5.5 kW (7.5 HP) Saw Blade Diameter: 300 mm Saw Blade Bore: 30 mm A-weighted emission sound pressure level at workplace LpA: 83 dB *3 Saw Blade Speed: 4800 rpm 1 Extraction Port: ø 140 mm Compressed Air Connection: 6-10 bar Connected Load: 7.5 kW Power Supply: 3 x 400 V / 50 Hz Dimensions (mm): Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting Range (mm): Dodpfshf Dqbex Aavjcp Type LS HS (vert) HS horizontal 6224 5300 2240 2100 Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Dodpfjpgkmwsx Aavecp Location: Available ex-stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Maximum configuration for professional users. Multi-function combination machine with TERSA cutterhead, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved with the scoring saw blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside. High-precision aluminium sliding table, anodised, running on hardened and riveted steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to max. 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° backwards into the fence. Four spindle speeds. Forward and reverse rotation of the spindle moulder. Quick changeover to thicknesser thanks to parallel-opening jointer tables. 2-speed feed on the thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Supplied with a separate rip fence and separate jointer fence. Lockable main switch. Equipment details: Format fence Instant control Outrigger Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Guides riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty against wear on the hardened guideways. Grey cast iron double-trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Mounted close to the saw blade, supported on both sides. Height and tilt adjustable up to 45°. Scoring unit with separate 0.55 kW motor as standard. Double-trunnion moulder unit Large, tilting double-trunnion spindle moulder unit made of grey cast iron. Spindle fence Heavy-duty professional design. The high-quality spindle fence made of grey cast iron comes with fine adjustment as standard. Three-way positionable for rapid return to preset settings. Fine adjustment by means of rack-and-pinion, numerical display, and aluminium fence jaws. Planer units Helical-toothed steel infeed rollers for constant and uniform wood feed. Heavy-duty anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterhead ensures an optimal finish. Table lips for quieter operation. Tersa planing knife shaft No setting or screwing required. Knife changes in seconds. Self-locking. Particularly quiet operation. Thickness table The thickness table is mounted on four large-dimension spindles, ensuring maximum stability under all working conditions. Special lifting mechanism keeps the table position stable even without locking. Parallel fence With fine adjustment and quick clamping. Robust round bar guide made of ground steel. Exchangeable aluminium rule. No measuring gap; guide rods overlap. Separate jointer fence Djdecnxa Sspfx Aavscp Large professional design (1800 x 150 mm), tiltable 0-45°. Quick adjustment. Robust round bar guide made of ground steel. Simultaneous opening Model No. 5500557

Kondisi: baru, Tahun pembuatan: 2025, Reinluft Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Designed for wood chips and wood dust. Engineered for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in its class Very quiet operation Application Area Clean air extraction systems for wood chips and wood dust Specifically designed for commercial environments Suitable for all woodworking machines with a matching extraction port diameter Can also be used for multiple dust sources High-quality, well-thought-out construction Rugged and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, ensuring versatile use Large inspection openings Large-capacity, mobile chip containers with clamp lever and chip collection bag Unit comes fully assembled upon delivery, allowing for immediate use Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made from polyester fleece, aluminum-coated, washable for long service life Filter comes standard in antistatic version, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control box Fan positioned downstream of the filter Equipment Details: Featuring innovative locking mechanism for secure container positioning All units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³ Scope of Delivery: Dcjdpscnw T Iofx Aavep Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with brakes Manual cleaning Model RLA 160 Article No. 5131620 Technical Data Suction port diameter: 160 mm Nominal airflow: 1,448 m³/h Maximum airflow: 2,400 m³/h Negative pressure at nominal airflow: 2,247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (