Sideloader empat arah

Dambach Multi Lifter

Kondisi: siap digunakan (bekas), Dijual: konveyor seperti terlihat pada foto dengan panjang sekitar 7,5 m. Lebar sabuk 0,3 m. Kemungkinan pengiriman tersedia. Nsdpfx Aber Nvx Uovowd

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Nwsdpfx Absnl Nqqovod

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Nodpsu Nlkxofx Abvewd

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line Nsdpeh H Iyxjfx Abvewd consists of: Unirex 3000 machining centre Univar 15 Unitex 15

Kondisi: bekas, Perangkat udara masuk tipe 3072 A 7300/3650 m³/h, kapasitas pemanas maksimum 83 kW, air panas 90/70 °C. Perangkat udara buang tipe 72, 7000/3500 m³/h. Lokasi penyimpanan: Nattheim. Nwjdpfsw I A N Asx Abved

Kondisi: siap digunakan (bekas), The subject of my auction is a conveyor belt with a length of 10.5 m and a belt width of 0.65 m. Nwedpfx Abow Dx Syovsd Possibility of transport.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, warna: kuning, berat keseluruhan: 5.250 kg, berat kosong: 5.250 kg, berat operasi: 5.250 kg, berat muatan maksimum: 2.000 kg, daya angkat: 2 kg/m, tinggi angkat: 4.500 mm, ukuran ban: 16 / 70-20, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, volume sekop: 0,8 m³, Tahun pembuatan: 2024, kapasitas angkut: 2.000 kg, Perlengkapan: hidrolik, kabin, lampu depan tambahan, en-gb-GUNTER GROSSMANN GG TELE 2000 New high-quality telescopic loader Description Load capacity: 2000 kg Bucket capacity: 0.8 m³ Turning radius: 4600 mm Nwsdpfou Dcgmox Abvod Lifting height: 4500 mm Lifting speed: ≤5.0 s Drive mode: fully hydraulic four-wheel drive Transmission gearbox: hydraulic, variable with 2 speeds Total weight: 5250 kg Dimensions (L x W x H): 5800 x 2000 x 2750 mm Quick coupler: yes Included: Hydraulic joystick + Quick coupler + Bucket SPECIFICATIONS Engine: Luotuo Cabin: Luxury version Adjustable steering: yes Tyre size: 16 / 70-20 Hour meter: Yes Work lighting: Yes - LED Reversing camera: Yes Total machine weight: 5250 kg Load capacity: 2000 kg KEY DIMENSIONS Dimensions (L x W x H): 5800 x 2000 x 2750 mm OPERATING RANGE Lifting height: 4.5 m Rated speed: 2400 rpm Maximum: breakout force bucket, lift cylinder 60 kN Drive: Four-wheel drive Maximum speed: 22 km/h Braking system: hydraulic, four-wheel disc brake Lifting time: ≤5.0 s

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 61.469 h, produsen pengendali: TRUMPF, model controller: TASC 6000, This TRUBEND Cell 5000 featuring the TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. It is the world's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, equipped with 6-axis backgauge sensor technology. Ensures highest repeat accuracy thanks to angle measuring technology (ACB) in automated operation. Features a robust all-steel frame, electro-hydraulic upper drive, and modern block hydraulics. The machine is controlled by the TRUMPF TASC 6000 with a 15-inch touchscreen and network capability. The TRUMPF TruBend Cell 5000 press brake is ideal for precise bending tasks. Contact us for further information on this machine. Nsdpex Imqlofx Abvswd • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Robust all-steel machine frame • Press beam with spherical bearings and tilt adjustment • Electro-hydraulic upper drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure scale • Measurement system with glass scale and spring compensation • Hydraulic oil within the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Backgauge/stop • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool displacement, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network capable • Teleservice via modem • Operation • Control panel with LCD keyboard and foot switch • Communication rail • Safety • Standard safety equipment • BendGuard safety device for upper tools up to 390 mm • CE marking Additional Equipment • TRUMPF BendMaster automation (standard equipment) • Robot/handling • Stable base and manipulator made of die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile, welded floor rail • Sheet sensor for contour detection • Rotary union for easy gripper change • Gripper coupling on BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double-sheet detection • NC gripper handover station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operating terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access door World's first bending automation with image recognition for maximum flexibility. Processes sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Highest repeatability thanks to angle measuring technology (ACB) in automated operation. TruBend 5085 (2720 mm x 850 kN) with BendMaster 60.

Kondisi: bekas, Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle Nwsdpfx Abjx H Al Novjd ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, EN_WEINIG_Type_UNICONTROL_10_3_032-1136_Year_1993_Technical_Data _Cross_Cut_Saw_with_Four_Position_Turret_Synchronized_Laser_Guida nce_Vertical_Stroke_125_mm_Speed_2800_rpm_Spindle_diameter_40_mm_ Tool_diameter_350_mm_Clamping_Length_40_mm_Horizontal_Stroke_160_ mm_Motor_4_kW_Extraction_Port_80_mm_UNITEC_Slotting_Spindle_50_x_ 300_mm_3_Tools_Vertical_Stroke_2x100_mm_Speed_3500_rpm_Spindle_di ameter_50_mm_Tool_diameter_300-320_mm_Clamping_Length_300_mm_Moto r_11_kW_Extraction_Port_140_mm_UNIVAR_Milling_Spindle_50_x_285_mm _(with_and_against_rotation)_3_Tools_Vertical_Stroke_2x95_mm_Spee d_6000_rpm_Spindle_diameter_50_mm_Tool_diameter_232_mm_Clamping_L ength_285_mm_Horizontal_Stroke_80_mm_Motor_11_kW_Extraction_Port_ 140_mm_UNIVAR_Milling_Spindle_50_x_285_mm_3_Tools_Vertical_Stroke _2x95_mm_Speed_6000_rpm_Spindle_diameter_50_mm_Tool_diameter_232_ mm_Clamping_Length_285_mm_Horizontal_Stroke_80_mm_Motor_11_kW_Ext raction_Port_140_mm_Specifications_Working_Width_Min_30_mm_Workin g_Height_Min_30_mm_Working_Height_Max_with_Stroke_100_mm_without_ Stroke_120_mm_Feed_1.1_kW_Variable_6-12_m_min_TOOLING_SET_LEITZ_D ufix_IV-68_EURO-Window_Digital_Display_for_Studio_Window_Mechanic al_Length_Stop_Screen_Control_Twin_Workpiece_Package_Return_Rolle r_Conveyor_Machine_in_good_technical_and_visual_condition_NET_PRI CE_EUR_7_400_Plus_VAT_Delivery_EXW_Availability_short_term_by_agr eement_Inspection_by_appointment_Errors_and_prior_sale_reserved. Nsdewk U Rlspfx Abvewd