Mesin frais

Deckel FP1

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, de2hu-20240619-1 Podpfeyf Eigex Abuspl

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Rectangular vertical table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed angle table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 250 mm Universal tilting table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Maximum lateral travel: 350 mm Swivel range in three planes, either side: 30°- 45°- 30° Spindle taper: - Horizontal spindle head: Iso 30 (40) - Vertical spindle head: Iso 30 (40) - High-speed universal head: SV E20+ES20 Swiveling in the vertical plane: Vertical spindle head: 360° Ppsdpow Uc Npofx Abujl Longitudinal travel (manual/automatic): 320/300 mm Vertical travel (manual/automatic): 375/355 mm Cross travel (adjustment handwheel): 150 mm Quill stroke: 60 mm Micrometer drum reading accuracy: 0.02 mm Main motor kW-rpm: 1.5/1500 Rapid traverse/feed motor kW-rpm: 0.45/3000 Coolant pump motor kW-rpm: 0.15/3000 Spindle speed range: - 1st range rpm: 58-375 - 2nd range rpm: 330-2000 Working feeds – longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical), mm/min: 1200 Unless stated otherwise, all technical data provided is without commitment and subject to possible errors or omissions.

Kondisi: diremaj di bengkel (bekas), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete identification, including a valid phone number and e-mail address, in order to provide you with a quotation. Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travels: X 300 mm Y 150 mm Z 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active digital display, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and is extendable horizontally by 100 mm - Coolant system (coolant tank in the machine base) - Documentation - Centralized lubrication Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Videos showing the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation from parallelism Y axis: 0.002 mm (measurement path 150 mm) Deviation from parallelism X axis: 0.002 mm (measurement path 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital display overhauled - Wiper set installed - LEDs on the active display replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Pedpfx Asxpwfgobuspl Price: net, ex works, loaded from stock.

Kondisi: baik (bekas), Please read the technical specifications in full. If you are considering this machine as a potential investment, we require your complete identification with a correct telephone number and email address in order to submit an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment, milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Vertikal head swiveling: +/- 90 degrees Ppedpfexyc Tkex Abuol Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data non-binding! Features: For horizontal machining, the milling head is swiveled 90 degrees and pushed to the back. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axes Machine was partially overhauled by a specialized company a few years ago. Equipment: 3-axis digital readout HEIDENHAIN Micro coolant spray device Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good, from a training workshop Available from March 2026

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Mesin Milling Universal untuk Perkakas Merek: DECKEL Psdpfsx S Edlsx Abuspl Model: FP 1 Aktiv Tahun pembuatan: 1990 – telah diuji di bengkel No. Seri Mesin: 2102-5866 Tipe Kepala Milling: 2171 Nomor Kepala Milling: 4613 Penerimaan geometris dengan protokol pengujian Aksesori: - Tampilan digital aktif 3-sumbu HEIDENHAIN TNC 113 dengan fungsi aktif pada sumbu X, Y, dan Z - Meja universal 590 x 250 mm (alur-T: 12 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 - Tanpa sistem pendingin cairan dapat dipasang jika diperlukan - Pelumasan sentral elektrik - Manual pengoperasian Bekas pakai sesuai kondisi, tanpa garansi Mesin secara teknis sesuai standar tahun pembuatannya.

Kondisi: sangat baik (bekas), Please read the technical specifications completely. If you are considering this machine as an investment, we kindly ask you to provide your full credentials, including a correct telephone number and email address, in order to receive an offer. DECKEL Universal Milling Machine FP1 No. 2101 Ppsdpfx Aboxyc N Ejuol with HEIDENHAIN 2-axis digital readout Travelling distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Number of gearbox speeds: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z axis: 5 – 500 mm/min Feed regulation: stepless Rapid traverse X/Z axis: 1200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data supplied without liability! Features: - For horizontal machining, the milling head is swiveled 90 degrees and pushed to the rear. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 2-axis HEIDENHAIN digital readout - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: good to very good from training facility Available from March 2026

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 30000452, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 340 mm, jarak gerak quill: 60 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, panjang meja: 600 mm, lebar meja: 210 mm, berat keseluruhan: 710 kg, beban meja: 200 kg, Perlengkapan: dokumentasi / manual, DECKEL FP1 – fully refurbished (2012) by FPS (Germany) with Heidenhain Digital Readout + Tool Cabinet with Tools and Dividing Head. Since the refurbishment, the machine has seen minimal use and is therefore in an as-new condition. About FPS: Specialized in the complete overhaul of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: fully refurbished (2012) – mechanically & electronically as new! Ppodpfx Absxywhcsuel LOCATION: Graz (Austria) IMAGES/VIDEOS: For further photos and videos of the running machine, please send us an inquiry Description: This high-quality DECKEL FP1 milling machine has been completely overhauled, with both mechanical and electronic components brought up to the latest technological standards. A new CE-compliant control cabinet was installed according to the current regulations BGVA 3 / DIN-EN 60204-1 for new machines. The control system, drive package, and drive motors were completely renewed and updated during the overhaul. As part of the modernization, a new touch-safe control cabinet as well as a new motor were also installed. Technical Data: Operation: manual, with automatic positioning capability Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically graduated with 16 speed steps) Feed rate: 10 – 500 mm/min (infinitely variable) Rapid traverse: 1.2 m/min (infinitely variable) Quill: Vertical & horizontal extension 60 mm, SK40 taper Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Max. table load: 200 kg Machine weight: 710 kg incl. angle table and milling head Space required: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics & drive packages Refurbished – mechanically & electronically as new Extras: Way cover for Z-axis Special paint finish Highlights: Heidenhain digital readout for precision operation Control system, drive package, and drive motors completely renewed during overhaul Contact us to arrange a viewing appointment.

Kondisi: baik (bekas), de2en-001 Ppsdpfxexmgguj Abusl

Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, posisi kepala milling: SK40, tegangan masuk: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Spindle speed 40–2000 RPM Automatic feed and rapid traverse on the X, Y, and Z axes. Infinitely variable. Table size 600 x 260 mm 2-axis Aktiv control, point-to-point operation. Podevuzg Aepfx Abuspl 3-axis digital readout from Heidenhain. Spindle taper SK40 Deckel type (external thread).

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Universal tool milling machine DECKEL FP 1 With 3-axis active digital display Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 Y 160 Z 340 mm Psdpfx Aew Agxrebujpl Speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Swiveling vertical milling head Retractable quill Infinitely variable feed via potentiometer 1 pcs. machine vice 1 pcs. steady rest with counter bearing 1 pcs. long arbor ø 22 mm, ø 16 mm, ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pcs. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin frais Deckel FP1. Kondisi sangat baik. Berfungsi penuh. Psdpfxoxgdr Ij Abuopl

Kondisi: diremaj di bengkel (bekas), panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 340 mm, Updated Machineseeker Description (with axis travels) Deckel FP1 Aktiv – 3 axes – partially overhauled – immediately ready for operation Offered here is a Deckel FP1 Aktiv in technically tested and partially overhauled condition. The machine has been professionally refurbished and is in reliable, ready-to-use condition. Ideally suited for workshops, toolmaking, training, as well as single-part and small series production. This is not an unchecked used machine, but a technically reconditioned tool machine with a clearly defined scope of performance and predictable delivery time. Technical data and features Travel paths: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop-tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of existing settings Renewal of all lubricants Replacement of selected standard parts and various wear parts Psdpfx Abjx Tdy Isujpl Repainted in RAL 7035 / 7016 The deliberate decision for a partial overhaul offers an optimal compromise between operational safety, cost efficiency, and availability. A complete overhaul of the guideways was not performed, as there was no technical necessity to do so. Scope of delivery Machine loaded free onto truck Delivery time approx. 12 weeks