Alat mesin penggilingan

Deckel FP1Aktiv

Kondisi: baik (bekas), Tahun pembuatan: 1985, Deckel FP1 Aktiv dengan tampilan digital Heidenhain 3 sumbu, 3 sumbu aktif, meja tetap, dudukan spindle SK 40 M16. Pelumasan sentral, buku petunjuk penggunaan. Kondisi sangat baik, siap pakai, berasal dari pusat pelatihan kejuruan. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Hsdpfjxwunzex Afcsfp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Stepless Feed – Excellent Condition Technical Specifications: >> Year of manufacture: 1990 Machine No.: 2102-5046 >> Fixed Angle Table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300 / 160 / 340 mm >> Vertical milling head adjustment on column: 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system: S20x2 >> Weight approx. 800 kg Hfjdou Um Erjpfx Afcsp Equipment and Accessories: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts diagram Remarks about the machine: Offered is a Universal Milling Machine Deckel FP1, year 1990, in excellent condition. The machine exhibits minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs extremely quietly. On this newer FP1 model, the feed is steplessly adjustable in all three axes, and it is also equipped with rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain control, dimensions can be entered and the machine approaches them automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes working easier and even more precise. Take the opportunity to inspect and test this outstanding machine on site under power.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, Dear Sir or Madam, We hereby offer a Deckel FP1 milling machine, 3-axis with retrofitted safety devices. This newer generation machine is equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. Additionally, the control cabinet can be disconnected from the machine in a matter of seconds thanks to Harting connectors. The connection of the safety components to the control cabinet is also made using this connector type, ensuring that ease of handling is maintained. We offer a 12-month warranty on the retrofitted safety devices, which can be supplied for any machine type! The electronic spindle guard is adjustable on several axes and is designed to prevent accidental contact with the spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cover is intended to prevent intervention into the rotating shaft stub and tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: fixed angular table Travels: X 300mm / Y 160mm / Z 340mm Hjdpfx Afsuw Uu Nscofp Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed rate: infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle protection cover Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked and inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices for you - We are happy to arrange shipping and/or installation

Kondisi: diremaj di bengkel (bekas), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Hedpoxpwfgofx Afcsfp Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication system Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measurement path 150 mm) Parallelism deviation X axis: 0.002 mm (measurement path 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital readout overhauled - Wiper set installed - LEDs on active display replaced - Oil change - Vertical milling head newly bearing-mounted - Oil sight glass replaced Price: net, ex stock, loaded

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Hfedou Racrepfx Afcop Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with a TNC113 3-axis active control system, renowned for its user-friendly operation. This later model from 1989 features central lubrication, an electric coolant pump, and a machine lamp, among other upgrades. The machine has undergone a comprehensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out: - Spindle bearings in the milling head replaced - New paintwork - Various standard components renewed, such as handles, oil sight glasses, push-buttons, etc. - Worn parts such as drive belts replaced - Bellows partially renewed - Gibs adjusted - And much more... Availability: Immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: Rigid angle table Travel (X/Y/Z): 300mm / 160mm / 340mm Quill Stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Hsdpfopy Eldox Afcofp Feed rate: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - On request, additional accessories such as tools can be ordered directly - On request, we can install additional accessories such as safety devices - We are happy to take care of shipping and/or installation

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 Hjdpou T D Nrsfx Afcsfp >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Hfsdpfx Afeu Nvwvocsp Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Hedpfsu R D I Sox Afcjfp Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 Hfedpfxexu E R Ie Afcjp >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. The machine is immediately available.