Alat mesin penggilingan

DECKEL FP2

Kondisi: bekas, Tahun pembuatan: 1989, msk-tx-001 Djdpfjx Ndbqjx Abhjcc

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 1,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm C-axis: 360° x 0.001° A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Dsdpfew E Nnnox Abhecc Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain type, 180 positions Total power requirement: 85 kW Machine weight approx. 20.5 t Space requirements approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary-swivel table Rotoclear window Probe interface prepared Blum laser tool measurement Vibration sensor Tool taper cleaning Operating mode 4 IKZ (internal coolant supply) with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Kondisi: bekas, Travel X-axis 800 mm Travel Y-axis 300 mm Travel Z-axis 400 mm Spindle speed 40 – 2000 rpm Spindle taper ISO 40 Feed rate 10 – 500 mm/min Spindle motor 2.2 kW Dodpobq Dbasfx Abhscc

Kondisi: bekas, 3-axis digital readout Heidenhain ND780 Coolant system Dsdpfx Absbu U Nnjhecc Mechanical central lubrication Fixed angle table X-axis travel: 400 mm Y-axis travel: 220 mm Z-axis travel: 400 mm Spindle speed: 25 – 2500 rpm Infinitely variable feed on 3 axes Rapid traverse on 3 axes Spindle brake Vertical milling head adjustable by 150 mm on spindle support Extendable vertical and horizontal quills – SK 40 taper Drawbar system S20x2 Weight approx. 1400 kg

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 6085074953, Offer 24169 Technical Specifications: Dcodpstrw Hmofx Abhec - Max. working width: 4050 mm - Max. cutting capacity (St 40): 13 mm - Cutting gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Back gauge motorized positioning control: 20 – 1000 mm - Front angle stop and support arms - Strokes per minute (depending on cutting angle and length): 7 – 15 cycles/min - Hydraulic drive: 400 V / 30 kW - Required space (incl. back gauge, without front support arms): approx. W 5400 x H 2250 x D 2250 mm - Weight: approx. 16,000 kg Includes: - Electric foot switch - Cutting line illumination - Cutting length preselection - Rear of the machine equipped with safety light curtain

Kondisi: baik (bekas), Tahun pembuatan: 1975, Mesin frais Deckel FP2 FPS retrofit dengan tampilan digital Heidenhain 3-sumbu. Mesin dalam kondisi baik, berasal dari departemen pelatihan. Meja tetap, kepala geser panjang, dudukan spindel SK 40. Aksesori: berbagai collet penjepit dan arbor frais. Dalam kondisi kerja yang baik. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Dedpfx Aeyhbn Robhscc

Tahun pembuatan: 1990, Kondisi: baik (bekas), Various collets and holders, approx. 300 pieces. Suitable for DECKEL milling machines FP1 – FP2 – FP3 – FP4 Dedpfxshvz Iio Abhecc Individual sale upon request.

Kondisi: baik (bekas), Data teknis: Panjang kerja: 2050 mm maks. kapasitas pelipatan: 18,0 mm Dcsdjxruvzspfx Abhsc Pembengkokan akhir: 12,0 mm Diameter rol atas: 280 mm Diameter rol bawah: 280 mm Perangkat pelipatan kerucut bantalan lipat hidraulis Daya motor: 7,5 kW Dimensi (Panjang x Lebar x Tinggi): sekitar 3650 x 1550 x 1650 mm Berat: sekitar 7,5 ton Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Kondisi mesin, teknik, dan keausan sesuai dengan usianya; mesin bekas dijual tanpa jaminan apa pun.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm Dodpsvbifgefx Abhecc - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, A completely overhauled universal tool milling machine Deckel FP2 (year of overhaul: 2019) is available. Travel distances X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Djdpfx Aevf Iy Djbhjcc

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm Dcodpju Et Nbefx Abhjc - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: bekas, tinggi total: 16.000 mm, lebar total: 1.100 mm, panjang total: 1.500 mm, specifications (conventional milling machine): Net weight: 1,000 kg Djdpfx Abox S Eayehocc Milling machine, universal milling machine, milling bench Model: Conventional Manufacturer: Deckel Type: FP2 Travel (X/Y/Z): 400 x 270 x 400 mm Speed range: 40–2,000 rpm Table size: 700 x 330 mm Taper: ISO40 Spindle motor power: 2.2 kW Overall dimensions (L x W x H): 1,500 x 1,100 x 1,600 mm Machine weight: 1,000 kg - Documentation available: No - CE certificate available: No - Control: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2,000 - Deals (actions): yes - Transport dimensions: 1,500 mm x 1,100 mm x 1,600 mm (L x W x H) - Transport weight [kg]: 1,000 kg - Number of transport packages: 1 Financial information VAT: The stated price is net, VAT applies additionally VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Lukas van Rossum

Kondisi: bekas, de_machine_spec_001 Dcjdpfx Aboxqrdtohoc

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 332, Offer 24130 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drilling spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2,000 rpm - 3 feed rates: 0.1 – 0.3 mm - Min./max. spindle-table distance: 310 / 610 mm - Drilling radius min./max.: 380 / 1,200 mm - Table height: 720 mm - Table size: 1,200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Required space approx.: W 1,200 x H 2,800 x D 2,300 mm - Weight approx.: 1,500 kg - Equipped with: - Thread-cutting device Dcjdpotxzrwsfx Abhoc - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the rear machine side

Kondisi: bekas, Tahun pembuatan: 1989, Technical details: X-axis travel: 300 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Control system: Contour 3 path control Spindle taper ISO: SK 40 Spindle head swivels left and right: 90° Quill travel: 60 mm Speed range: 40 – 4000 / 21 steps rpm Feed rate: 2 – 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table mm Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. LxWxH: 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Equipment: - Operation via Grundig Elektronic control panel with extension arm - Coolant system with pump - Handheld control device with handwheel - Machine lighting Dcedpfx Abeu Nc Twohec The machine can be demonstrated under power. i.D.