Mesin penggilingan - universal

DECKEL FP2

Kondisi: baik (bekas), Tahun pembuatan: 1979, Deckel FP2 dengan kontrol kontinu, mesin frais alat. Mesin dalam kondisi baik, meja kaku, dudukan spindle SK 40, aksesoris: berbagai collet penjepit dan arbor cutter. Kondisi siap pakai yang baik. Dapat didemonstrasikan di bawah daya setelah kesepakatan. Nlodpfx Aexzn Hljbmsi

Kondisi: baik (bekas), Tahun pembuatan: 2010, Centre lathe, Manufacturer: JET, Type: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Nlodpjqwgzqofx Abmsi Spindle bore: 38 mm Machine in good condition, from training workshop. Machine documentation available.

Kondisi: baik (bekas), Dalam kondisi teknis yang baik dan sepenuhnya berfungsi. Kecepatan spindel: 18 Kecepatan putaran: 40–2000 rpm Daya terpasang total: 2,2 kW. Berat mesin sekitar 1200 kg. Aksesori Nodpfxoxx R Tve Abmjli

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 in special light gray paint finish with new 3-axis K+C digital readout Technical Data: >> Machine No. 5983, Year of Manufacture: approx. 1975 >> Fixed angle table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 taper >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: >> 3-axis digital readout by K+C, newly installed with manufacturer's warranty. Display unit: Set reference and zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, bolt hole patterns, radius milling functions, etc. >> Operating manual for digital readout Nodeu I Rm Nepfx Abmjli >> Coolant system About the Machine: Offered is a Deckel FP2 universal milling machine in good condition. The Deckel shows minimal backlash on the handwheels, and all spindles move smoothly. The machine has been completely disassembled and newly painted. An oil change has been performed. Mechanically and electrically tested. The K+C digital readout makes operation easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: bekas, Tahun pembuatan: 1996, Cutting diameter: 260 mm Saw band length: 2910 mm Cutting width: 0.9 mm Cutting range at 45° (round): 200 mm Cutting range at 90° (square): 260 x 260 mm Nlodpfx Abjtqql Tjmei Cutting range at 90° (flat): 300 x 260 mm Cutting range at 60° (round): 165 mm Cutting range at 60° (square): 150 x 150 mm Cutting range at 60° (flat): 160 x 120 mm Cutting speed: 35 / 70 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Material support height: 950 mm Total power requirement: 2.0 kW Machine weight approx.: 400 kg Machine dimensions (L x W x H): 1.70 x 0.90 x 1.67 m Accessories: Coolant system

Kondisi: baik (bekas), Tahun pembuatan: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Nljdpfx Abem Uygvomei Angle table clamping area 700 x 285 mm Travel paths X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, de_machine_spec_001 Nljdpfx Abjxqrdtsmsi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, The machine is in very good condition and comes from a training workshop. Technical details: X-axis travel: 300 mm y-axis travel: 160 mm z-axis travel: 290 mm Table area: 210 x 600 mm Tool holder: SK 40 Spindle speeds: (16) 40 – 2000 rpm Infinitely variable feeds: 5 – 500 mm/min Nedjwx H Nvjpfx Abmeli Rapid traverse: 1.2 m/min Spindle drive: 1.5 / 1.9 kW Total power requirement: 9.5 kVA Machine weight approx.: 730 kg Space requirement approx.: 2000 x 2200 x 1655 mm Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis digital readout, make: Heidenhain Fixed angle table Coolant system

Kondisi: bekas, Tahun pembuatan: 1989, Technical details: X-axis travel: 300 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Control system: Contour 3 path control Spindle taper ISO: SK 40 Spindle head swivels left and right: 90° Quill travel: 60 mm Speed range: 40 – 4000 / 21 steps rpm Feed rate: 2 – 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table mm Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. LxWxH: 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Equipment: - Operation via Grundig Elektronic control panel with extension arm - Coolant system with pump - Handheld control device with handwheel Njdpou Nc Twsfx Abmjli - Machine lighting The machine can be demonstrated under power. i.D.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Deckel FP2 Aktiv mesin frais alat dengan 3-sumbu Heidenhain TNC 111 Aktiv digital display. Mesin dalam kondisi sangat baik, berasal dari departemen pelatihan pemerintah. Meja kaku, dudukan spindle SK 40, Aksesori: berbagai collet dan arbor cutter, penahan balik. Kondisi sangat baik dan siap pakai. Dapat didemonstrasikan di bawah tegangan sesuai kesepakatan. Nedpjxyhmvofx Abmeli

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Data teknis: Tinggi senter: 500 mm Diameter putar: 1090 mm Diameter putar di atas eretan: 690 mm Jarak antar senter: 1500 mm Putaran: 6 – 1250 rpm Lubang spindle: 155 mm Display posisi digital: SONY Lebar ranjang: 700 mm Dudukan alat: MK 6 Daya motor: 30 kW Tanda CE Dimensi (P x L x T): sekitar 3500 x 1750 x 1900 mm Nledoxlgmfopfx Abmsi Berat: sekitar 7,5 ton Aksesori: Pelumasan sentral Perangkat pendingin Pelindung cipratan belakang Chuck 3 rahang 500 mm Chuck 4 rahang 800 mm Penjual tidak bertanggung jawab atas kesalahan pengetikan atau transmisi data. Kondisi mesin (tampilan, teknik, dan keausan) sesuai dengan usianya; mesin bekas dijual tanpa jaminan.

Kondisi: diremaj di bengkel (bekas), Mesin Frais Alat Universal Merek: harich (DECKEL) Model: B (FP 2) tanpa tingkat Nodpovfdatjfx Abmjli telah direkondisi dengan CE pengujian geometris dengan protokol pemeriksaan dilengkapi garansi Aksesori: - Pembaca digital 3-sumbu FAGOR Innova 30i-M - Meja tetap atau meja universal - Kepala frais vertikal SK 40 - Pelumasan sentral manual - Perangkat pendingin - Buku panduan pengoperasian Perlengkapan CE dan keselamatan: - Kelistrikan mesin baru dengan panel kontrol - Tutup pelindung di kepala frais vertikal dengan pengawasan elektronik - Pelindung cekam dengan pengaman elektronik - Motor penggerak dengan fungsi rem - Panel kontrol dengan tombol berhenti darurat, tombol aktifasi, mulai, dan stop, potensio untuk pengaturan feeding - Dokumentasi baru untuk mesin dan panel kontrol - Deklarasi konformitas CE

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (freshly planed) >> Spindle speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse on 3 axes Nlsdpfsuc Ubwsx Abmsi >> Motor power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertically extendable quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and features: >> 3-axis TNC 113 Aktiv digital readout Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.

Kondisi: bekas, WEBO multi-spindle drilling machine with 4 stations, Model B 20 Serial Nos.: 376/13; 376/14; 376/27; 376/36 Year of manufacture: approx. 1970 Drilling capacity: 20 mm Spindle taper: MK 2 – long quill Distance between drilling heads: 335 mm Throat depth: 260 mm Quill travel: 190 mm Table size: 350 x 1500 mm Distance spindle/table: min. 30 mm / max. 700 mm Spindle speeds drill head 376/13: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds drill head 376/14: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Nsdeihmwtepfx Abmsli Spindle speeds drill head 376/27: 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm Spindle speeds drill head 376/36: 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm Motor power: 1.1 / 1.3 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustment via 2 motor speeds and 4 stepped V-belt pulleys - Drill head height adjustment via rack-and-pinion with hand crank approx. 300 mm - Height-adjustable drill table approx. 350 mm Space requirement (L x W x H): 1750 x 1100 x 1900 mm Weight: 1900 kg In good condition

Kondisi: baik (bekas), Tahun pembuatan: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Extended ram-type milling head. Accessories include various collets and cutter arbors, tailstock. Good operational condition. Can be demonstrated under power by appointment. Nodpsumclajfx Abmeli