Pemotong alat

Deckel FP3 L Aktiv

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Brand: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating manual Kljdpfx Ajh Rv U Eea Nel - Drill grinder with diamond wheel -Used, as seen-

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with new 3-axis FPS Aktiv Digital Readout Heidenhain Completely overhauled by FPS in 2015 As-new condition Technical data: Kodpfxeu Dm E Hs Aa Nell - Year of manufacture: 1980 Machine No. 2201-5045 - Fixed angle table - Spindle speed: 25 – 2,500 rpm - Infinitely variable feed rate on 3 axes - Rapid traverse on 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500/300/400 mm - Vertical milling head adjustable on the spindle carrier by 200 mm - Vertical and horizontal quill – SK40 extendable - Drawbar M16 - Weight approx. 1,500 kg Accessories and features: - 3-axis Aktiv digital readout Heidenhain (latest version) - Coolant system - Central lubrication system About the machine: Offered is a universal milling machine Deckel FP3 in as-new condition. The FP3 was completely overhauled by FPS in 2015 and has since seen very little use. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is steplessly adjustable in all three axes. Additionally, the machine features rapid traverse in each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain path control system, you can enter dimensions that the machine automatically moves to. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Tahun pembuatan: 2001, Kondisi: bekas,

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Mesin Frais Universal TOS FNGJ 32 Tampilan digital Heidenhain 3 sumbu Tahun pembuatan: 1999 Perjalanan sumbu: X 600, Y 400, Z 400 mm Rentang putaran: 40 – 2000 rpm Klodsxc It Ispfx Aa Nol Dengan perlengkapan berikut: - Meja sudut tetap, permukaan penjepit 800 x 400 mm - Kepala frais vertikal - Pinol bor yang dapat ditarik keluar - Berbagai dudukan alat SK 40 - Perlengkapan pelindung - Wadah serbuk logam - Lampu mesin - Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z - Sistem pendingin - 4 pcs alas mesin

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 Klsdpfju Aa I Ssx Aa Nel W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Ksdpfxeh Hvk Ae Aa Nsll Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm Kljdpfx Asvbifgea Nol - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: baru, Tahun pembuatan: 2025, Completely overhauled, as-new machine, upgraded to the legally required current safety standard 'state of the art,' in accordance with the Operational Safety Ordinance of the Employers' Liability Insurance Association. Control Cabinet Electronics Installation of a new CE-compliant control cabinet according to the latest statutory requirements of the Employers' Liability Insurance Association: BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: The entire machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the official manufacturer. This ensures compliance with the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The machine's year of manufacture is thus equivalent to the delivery date. Klodpfxsh Sptnj Aa Nol Standards complied with: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Active digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed settings for maximum torque / milling performance Feed 5 to 500 mm/min, stepless adjustment Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Travel X/Y/Z: 800/300/400 mm Table Fixed angle table 1000x440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90 ° Options • Z-axis bellows • Chip tray • Machine light • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7/61, Manufacturing origin: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Quill travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y travel: motorized Number of T-slots: 6 (longitudinal) DRILL HEAD Spindle taper: Morse 0 Spindle speed, infinitely variable: 150-3000 rpm Spindle feed: 0.015 mm/rev Measuring system: direct, optical Measuring elements: graduated scales, increments 1 mm Readout: display Zero point shift: yes Direct reading: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW All technical data is subject to change without notice or error. Klsdpfod Amgkjx Aa Nol Inventory No. 2160006, machine equipped with: 1 rotary table Ø 220 mm with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, Cap. 3 mm, MK0 1 Morse taper center, MK0 1 probe with spring-loaded tip, MK0 1 center punch, MK0 1 chuck for centering drills, MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head Type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports

Kondisi: sangat baik (bekas), Tahun pembuatan: 1975, OFFER We can offer you, without obligation and subject to prior sale and errors, the following from stock: Kedpfx Aasxzk Iro Njll DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 Table travels: longitudinal powered/manual 390 / 400 mm vertical powered/manual 390 / 400 mm cross slide powered/manual 190 / 200 mm Fixed angle table 250 x 700 mm Clearance under spindle 400 mm Spindle overhang approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total connected load 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and indexing plates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling cutters, various arbors, etc., as well as operation tools, etc.; separate control cabinet; coolant system Condition: very good – demonstration ready, ideal for training workshops Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We constantly have further DECKEL FP 1 / FP 2 / FP 4 milling machines as well as accessories such as spiral milling attachments additionally in stock.