Pemotong alat

DECKEL FP3

Kondisi: baru, Tahun pembuatan: 2026, Completely overhauled, as-new machine, upgraded to the legally required current safety standard 'state of the art,' in accordance with the Operational Safety Ordinance of the Employers' Liability Insurance Association. Ffjdpoh Sptnsfx Abhou Control Cabinet Electronics Installation of a new CE-compliant control cabinet according to the latest statutory requirements of the Employers' Liability Insurance Association: BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: The entire machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the official manufacturer. This ensures compliance with the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The machine's year of manufacture is thus equivalent to the delivery date. Standards complied with: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Active digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed settings for maximum torque / milling performance Feed 5 to 500 mm/min, stepless adjustment Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Travel X/Y/Z: 800/300/400 mm Table Fixed angle table 1000x440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90 ° Options • Z-axis bellows • Chip tray • Machine light • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc.

Kondisi: baru, Tahun pembuatan: 2026, Prod-Masz provides you with a brand-new, fully functional machine that has been tested under operational conditions. It meets the requirements of applicable standards regarding design and operational safety. - The extension table facilitates the handling of large-format sheet metal panels on the table - Support table with measurement scale - Robust and compact steel construction - High-quality, durable steel blades - Extremely stable and heavy cast-iron construction - Ground and hardened guillotine shear blades - Rear gauge system with scale - CE-certified quality - Declaration of conformity - Suitable for steel sheets up to 1.2 mm - Open design suitable for continuous cutting - Maximum working width: 3000 mm - Motor power: 2.2 kW - Oil type: HL 46 - Pressing force: 4 t - Operating pressure: 120-150 bar - Equipped with hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg Shipping costs: 500 Euros We look forward to your enquiry! Fodsda I Ihspfx Abhjfu

Tahun pembuatan: 1980, Kondisi: siap digunakan (bekas), Max. speed: 2,500 rpm, feed rate: 5–500 mm/min. Fsdpfx Abofdzzyehofu

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Control: Deckel Dialog 11, equipped with a vise, inspection possible. Ffsdpfx Absqi D S Uoheu

Kondisi: bekas, Tahun pembuatan: 2004, de Fsdpfsuq Iwpex Abhjfu

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), CNC-universal-fraesmaschine-deckel Fedoya Hw Ujpfx Abhjfu

Kondisi: bekas, Detail teknis: Tipe: Deckel FP3 / 4A-TC dengan Contour 3 Tahun pembuatan: 1987 Pada tahun 2025, telah dipasang power supply baru dan rangkaian ballast baru. Fsdpsyhwh Tjfx Abhsfu Majalah penukar alat tidak lagi berfungsi.

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Fjdpfofxyhfox Abhjfu Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: Tahun 80-an Data teknis: Jarak gerak X/Y/Z: 400 / 400 / 400 mm Konektor alat: SK 40 Rentang putaran: 40 - 4000 rpm Feed, dapat diatur tanpa tingkat: 2 - 360 mm/menit Gerak cepat: 4000 mm/menit Meja sudut: 700 x 460 mm, beban maksimum 350 kg Penukar alat: Jumlah alat: 20 Diameter maksimum alat: 80 mm Panjang maksimum alat: 300 mm Berat maksimum alat: 6 kg Perlengkapan: Ffsdpfx Ajyfrf Iobhou - Kontrol: Kontrol lintasan CNC Deckel Dialog 11 - Sistem penjepit hidromekanis SK 40 dengan baut penarik DIN 69872 - Spindel kerja vertikal dan horizontal - Kepala milling dapat diayun manual +/- 90° - Transmisi langsung bertingkat geometris untuk torsi maksimum - Kapasitas milling pada spindel kerja

Kondisi: belum diuji (bekas), Tahun pembuatan: 1980, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 400 mm, lebar meja: 370 mm, panjang meja: 650 mm, visualisasi 3 sumbu Heidenhain meja universal 650 x 370 mm spindle 40, kecepatan spindle maksimum 2.500 rpm lintasan: 500 x 300 x 400 mm berat: 1.500 kg Fedpjyhdgcefx Abhsfu

Kondisi: bekas, Tahun pembuatan: 1999, X-axis travel 600 mm y-axis travel 525 mm z-axis travel 500 mm Table clamping surface 1000 x 543 mm Spindle taper SK 40 Spindle mount DIN 69871 Spindle speeds - stepless 20 - 12,000 rpm Feed rates X/Y/Z axis 20 - 10,000 mm/min Rapid traverse X/Y/Z axis 18 / 18 / 15 m/min Table load capacity max. 350 kg Fjdpetqqmhefx Abhefu Control HEIDENHAIN MillPlus Head swiveling +/- 90° Total power requirement 26 kVA Machine weight approx. 4.2 t Machine dimensions L x W x H 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Tahun pembuatan: 1990, Kondisi: baik (bekas), Various collets and holders, approx. 300 pieces. Suitable for DECKEL milling machines FP1 – FP2 – FP3 – FP4 Ffedpfx Abjhvz Iijheu Individual sale upon request.

Kondisi: bekas, Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Kami juga menawarkan mesin frais bekas DECKEL FP 3 AKTIV ini, tahun pembuatan 1983, saat ini berada di Spanyol. Tersedia segera. Diagram listrik: 6004 004202 – Tegangan operasi: 380 V – Frekuensi: 50 Hz – Arus nominal: 21 A – Mesin ini dilengkapi dengan display digital aktif 3-sumbu dari HEIDENHAIN. – Kecepatan spindle: 40–2500 rpm – Dimensi meja: 800 x 420 mm – dengan 9 alur – Dudukan alat: SK 40 – Perjalanan sumbu X: sekitar 500 mm, Y: sekitar 400 mm, Z: sekitar 400 mm. Fedpfx Aboygwqlohefu

Tahun pembuatan: 1990, Kondisi: bekas, nomor mesin/kendaraan: 90030003, Table size: 500 x 1200 mm X-axis travel: 1000 mm Y-axis travel: 550 mm Z-axis travel: 600 mm Ffjdpfx Ae Npwfebhsu Spindle taper: ISO 40 Spindle speeds: 60 - 2700 rpm Spindle drive: 10 kW Electrical connection: 380 V, 20 kVA Required space: 3200 x 2800 x 2650 mm Weight: 7.3 t

Kondisi: bekas, Tahun pembuatan: 1987, - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter support for long milling arbors - Hydraulic tool clamping system - Automatic spindle speed gearbox - Automatic clamping on X/Y/Z axes - Automatic central lubrication - Coolant system - Direct path measurement Fodsu Awlzjpfx Abhjfu - Collision protection coupling on Z/Y axes - Year of manufacture: 1987 Technical Specifications Work area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Slide quill travel vertical: 80 mm - Vertical milling head travel on spindle carrier: 150 mm Main drive: - Motor: pole-changing three-phase brake motor and gear unit with forward/reverse rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step ratio: 1.25 - Tool holder: SK40 (M16) - Tool clamping: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Programmable feed rate: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance table center to mounting face: 260 mm - Max. clearance height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Swivel range in horizontal position (axis C): 360° - Tilt range (axis A): +450 / -150° - Swivel range (axis B): ± 450° - Measuring range on direct digital readout: resolution 360,000 x 0.001° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Footprint with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²