Mesin penggilingan

Deckel FP4M

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 90 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, Perlengkapan: dokumentasi / manual, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, making it in top condition and technically, visually, and geometrically hardly distinguishable from a new machine. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travel range X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table configuration: Rigid angle table or rotary-tilt-swivel table Further equipment and accessories: including 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request... Our Service Promise to You: Kfsdpex Irwdsfx Aahsa - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color for your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If desired, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation

Kondisi: bekas, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVELS - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Maximum taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDANCE - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total power consumption: 11 [kVA] Kfsdpfx Aaeuhq Rlohsa WEIGHT AND DIMENSIONS - Required space: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Kondisi: bekas, Geldmacher MST / Deckel FP4M Milling Machine, Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions / measurements: Reference value: approx. 2,500 × 2,700 × 2,100 mm (length × depth × height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is adjustable on the ram. Spindle speed range: Kfodpfx Aaexcldkehja approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organise cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks stated are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the description of the article may occur and are subject to change.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2203-7097 with warranty Kjdpfslfc U Dex Aahsfa Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual Used, sold as seen The machine is in accordance with the technical standard of its year of manufacture.

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Technical Description with Key Data: Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Kfodpfx Aaek E Hmtohsa Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm.

Kondisi: baik (bekas), Tahun pembuatan: 1987, Mesin frais alat Deckel FP4M dengan display digital Heidenhain 3 sumbu, meja tetap, spindle SK 40. Aksesoris: berbagai collet dan arbor frais. Kondisi baik, siap pakai. Bisa diperagakan dalam keadaan menyala sesuai kesepakatan. Kfedpfjxmi I Iox Aahoa

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Ksdpfx Aajxctyajhsfa Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection Kodpfevrckqox Aahofa >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 790 mm, lebar meja: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Kfedpfxewffymo Aahsa Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, en-001 Kfodpfx Aaevvtlgehoa

Kondisi: bekas, tinggi total: 2.450 mm, panjang total: 4.000 mm, lebar total: 2.000 mm, de-hu Kodpfx Aaewr Drhehefa

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perjalanan sumbu X: 500 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 400 mm Kecepatan putar: 50 – 2500 rpm Daya penggerak: 2,7 / 4,4 kW Penjepit alat: SK 40 dengan penjepit hidrolik sesuai DIN 2080 Jenis meja: Meja tetap atau meja putar Luas permukaan meja: 650 x 380 mm Berat: 1600 kg Kfjdpsw I A D Tjfx Aahsa Dimensi (dengan area keamanan): sekitar 2500 x 2700 x 1950 mm Warna cat: RAL 6011 hijau reseda Indikator digital: 3-sumbu HEIDENHAIN Perlengkapan: Pelumasan sentral, bak pendingin KSS, aksesori tambahan atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain Digital Display in special paint finish Light Grey, CE compliant!!! Technical Data: Kfedpfx Aow N Sfvoahja >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Rigid angle table (newly planed) >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head displaceable on spindle carrier: 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill travel: 90 mm extendable >> Clamping system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant equipment >> Chip tray >> Central lubrication About the Machine: Offered here is a universal milling machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is functional in all axes, and all bellows are as new. The rigid angle table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. Thanks to the Heidenhain digital readout, work is easier and even more precise. Take the opportunity to view and test the machine under power on-site.

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Tool grinding machine Jungner Sweden Kodjwdihrspfx Aahofa Year of manufacture: 1995 Accessories

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Kfedpfxsu Tuk Ho Aahja