Mesin penggilingan

DECKEL FP4M

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 90 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, Perlengkapan: dokumentasi / manual, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, making it in top condition and technically, visually, and geometrically hardly distinguishable from a new machine. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Laodpsx Irwdefx Aahek Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travel range X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table configuration: Rigid angle table or rotary-tilt-swivel table Further equipment and accessories: including 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request... Our Service Promise to You: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color for your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If desired, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 35 / 45 kW Max. torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range of driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Max. torque driven tools: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time (30°): 0.4 sec Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 1250 V4 - Tailstock Lodpovzhiwjfx Aahjak - Y-axis - Driven tools - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Kondisi: bekas, Geldmacher MST / Deckel FP4M Milling Machine, Toolroom Milling Machine Weight: approx. 1,450 kg Ljdpfx Aexcldkjahjak Year of manufacture: 2012 Installation dimensions / measurements: Reference value: approx. 2,500 × 2,700 × 2,100 mm (length × depth × height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is adjustable on the ram. Spindle speed range: approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organise cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks stated are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the description of the article may occur and are subject to change.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric Lajdpfx Aaolfc U Dehjk - Coolant system - Operating manual Used, sold as seen The machine is in accordance with the technical standard of its year of manufacture.

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm Laedpfx Ajd Hl Stoahjk

Kondisi: baik (bekas), Tahun pembuatan: 1987, Mesin frais alat Deckel FP4M dengan display digital Heidenhain 3 sumbu, meja tetap, spindle SK 40. Aksesoris: berbagai collet dan arbor frais. Kondisi baik, siap pakai. Bisa diperagakan dalam keadaan menyala sesuai kesepakatan. Lajdjxmi I Ijpfx Aahjk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 Laedpfx Aexctyajahek >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Kondisi: baik (bekas), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional. The machine can be inspected and tested under power on site. International shipping available. Inspection: Lodpfxoum Rpyj Aahjak Please note that, to avoid misunderstandings, the machine can be inspected and tested under power prior to purchase. Should you have any questions, please ask them before buying to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 790 mm, lebar meja: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Lodpfxswffyms Aahsak Spindle speeds 50 - 2,500 rpm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, en-001 Lajdevvtlgspfx Aahok

Kondisi: bekas, Tahun pembuatan: 1988, Travel path x: 310 mm y: 340 mm z: 170 mm Total power requirement: 2.5 kW Machine weight approx.: 900 kg Required space approx.: m M A C M O N Universal Tool Milling Machine with HEIDENHAIN 3-axis digital readout Type M 100 D Year of manufacture: 1988 Serial No.: 1536 Table travels: - longitudinal, motor/manual: 290 / 310 mm - vertical, motor/manual: 310 / 340 mm Cross travel of milling slide, manual: 170 mm Fixed angle table: 215 x 600 mm Vertical head swiveling: 360° Quill stroke vertical head: 70 mm Installation height under spindle: 350 mm - Overhang of vertical spindle: approx. 100 - 320 mm Lasdpfxst Hxate Aahsk Spindle taper: SK 40 21 vertical spindle speeds: 50 - 2,500 rpm Horizontal: 40 – 2,000 rpm Feed range (stepped): 9 – 450 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 900 kg Accessories / Special Features: • 3-axis HEIDENHAIN digital readout • Modern design selector wheels for feed and spindle speed (no levers) • Fixed angle table approx. 215 x 600 mm mounted • Machine light, swiveling chip guard • Equipped with a movable vertical milling head ISO 40, quill stroke 70 mm • Control cabinet mounted on machine, integrated coolant system, chip tray, various arbor holders, etc. Condition: good – ready for demonstration, ideal for training workshop/education Delivery: ex stock – as inspected Payment: strictly net – on receipt of invoice

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perjalanan sumbu X: 500 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 400 mm Kecepatan putar: 50 – 2500 rpm Daya penggerak: 2,7 / 4,4 kW Penjepit alat: SK 40 dengan penjepit hidrolik sesuai DIN 2080 Jenis meja: Meja tetap atau meja putar Laedpfjw I A D Tsx Aahjk Luas permukaan meja: 650 x 380 mm Berat: 1600 kg Dimensi (dengan area keamanan): sekitar 2500 x 2700 x 1950 mm Warna cat: RAL 6011 hijau reseda Indikator digital: 3-sumbu HEIDENHAIN Perlengkapan: Pelumasan sentral, bak pendingin KSS, aksesori tambahan atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain Digital Display in special paint finish Light Grey, CE compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Rigid angle table (newly planed) >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head displaceable on spindle carrier: 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill travel: 90 mm extendable >> Clamping system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant equipment >> Chip tray >> Central lubrication Ledpfx Ajw N Sfvoaheak About the Machine: Offered here is a universal milling machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is functional in all axes, and all bellows are as new. The rigid angle table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. Thanks to the Heidenhain digital readout, work is easier and even more precise. Take the opportunity to view and test the machine under power on-site.

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Technical Description with Key Data: Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Laodpfxek E Hmto Aahok Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Lodpfou Tuk Hox Aaheak