Mesin cetak injeksi

DEMAG Ergotech System 80/420-430

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tonnes Screw diameter: 25 mm Year of manufacture: 2003 Ncedpfx Ajhrw Amsglsl Sprue picker 2 units

Kondisi: baik (bekas), Tahun pembuatan: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mould height: 330 x 830 mm Opening stroke: 675 mm Ncjdpjrgw Exsfx Agljl Maximum diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner zones: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Kondisi: bekas, Tahun pembuatan: 2001, Clamping force: 250 t Screw diameter: 70 mm Tie bar spacing (vertical): 630 mm Ncsdpfx Aevbbvkoglsl Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various used injection moulding machines are available: 1) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2003, operating hours: approx. 100,000 h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2006, operating hours: approx. 105,000 h. 5) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 6) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 7) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 8) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 67,000 h. 9) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2007, operating hours: approx. 98,000 h. 10) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 11) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2000. Nodpfx Asv R Ew Djglscl 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2001. 13) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2002. 14) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2006, operating hours: approx. 107,000 h. Documentation is available. On-site inspection is possible. Machines can be sold individually.

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 878 0730, gaya penjepit: 2.500 kN, jarak antara tiang: 630 mm, tinggi cetakan (min.): 330 mm, gaya ejektor: 69.000 N, lintasan ejektor: 200 mm, langkah pembukaan: 675 mm, panjang pelat: 950 mm, lebar pelat: 950 mm, panjang total: 6.500 mm, lebar total: 1.900 mm, tinggi total: 2.300 mm, berat keseluruhan: 13.100 kg, kapasitas pemanasan: 27 kW (36,71 hp), tekanan: 190 batang, daya pompa: 4.500 W, daya: 72 kW (97,89 hp), jenis arus masuk: AC (pendingin udara), frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 167 A, Perlengkapan: dokumentasi / manual, Technical Data – Demag Ergotech 250/630–1450 Clamping Force: 2,500 kN Tie Bar Distance: 630 × 630 mm Maximum Opening Stroke: 675 mm Minimum Mold Height: 330 mm Maximum Mold Height (with WA): 710 / 830 mm Platen Size (H×V): 950 × 950 mm Max. Tool Weight: 3,300 kg Max. Weight of Movable Mold Half: 2,200 kg Ejector Stroke: 200 mm Ejector Force: 69 kN Injection Unit Screw Diameter: 50 / 60 / 70 mm Injection Pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Stroke Volume: 530 / 763 / 1,040 cm³ Shot Weight (PS): 480 / 690 / 940 g Heating Capacity (Plasticizing Cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Hydraulic Power Pack: 37 / 45 kW Total Installed Power: 52 / 60 / 64 / 72 kW Supply Voltage: 3×400 V Frequency: 50 Hz Max. Current Draw: 167 A Nsdpfx Ajw Hq Hhsglocl Dimensions & Weight Overall Length: 6,500 mm Overall Width: 1,900 mm Overall Height: 2,300 mm Net Weight of Machine: 13,100 kg

Kondisi: bekas, Tahun pembuatan: 2009, Mesin cetak injeksi Sumitomo Demag IntElect 210/580-1000, tahun pembuatan 2009 (tanpa perlengkapan handling/alat pengatur suhu/pasokan material [corong, alat konveyor]). Demag 210: diameter ulir Ø 50 mm - Sumitomo Demag IntElect 210/580-1000, tahun pembuatan 2009: 6260 x 1555 x 2219 mm (P x L x T), berat bersih 11.000 kg Deskripsi SGM Jam operasi Penghitung siklus Pemanas silinder Penggerak listrik Ncodpfxsw E N S Hj Aglel Sumitomo Demag IntElect 210/580-1000 27.297 25.717 3.450.308

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Demag Concept 100/420-200 Tahun pembuatan: 2007 Unit injeksi: Diameter screw: 25 mm Tekanan injeksi: 2752 bar Volume langkah: 61,3 cm3 Berat injeksi (PS): 54 g Jarak dosis maks.: 125 mm Nedpfxjx Uqb Ie Aglocl Unit penutup: Gaya penutup: 1000 kN Jarak buka maks.: 500 mm Tinggi pemasangan cetakan min.: 250 mm Jarak antar pelat penjepit maks.: 750 mm Dimensi pelat penjepit: 600 x 600 mm Jarak bebas antara tiang: 420 x 420 mm Berat cetakan maks.: 700 kg Perlengkapan: Penarik inti: 2x Pemanas alat: 6x Katup udara: 1x Antarmuka robot Mesin dikirim lengkap dengan robot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, berat injeksi: 482 g, tinggi total: 2.400 mm, berat keseluruhan: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 we have available for sale. Please contact us for further information. Nsdjx D Nwqjpfx Aglecl • Clamping unit size: 250 • Locking force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Dosing stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max. drive overhang with nozzle contact: 184 mm • Max. drive overhang with nozzle retraction: 1,279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Kondisi: bekas, Tahun pembuatan: 2007, gaya penjepit: 420 kN, volume langkah: 1.212 cm³, tekanan injeksi: 1.877 batang, berat keseluruhan: 20.000 kg, jam kerja: 53.000 h, diameter konveyor sekrup: 70 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Nodpfxjxr N Ure Aglscl Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Demag Multi 80/420-80h/120v injection moulding machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Njdpfsww H S Ijx Aglscl Drive type: Hydraulic Technical data – clamping unit Clamping force: 800 kN Clearance between tie bars: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection unit – two-component First unit (horizontal): Nitrided screw Screw diameter: 22 mm Second unit (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4,100 kg Equipment & additional information Control language: German Full machine history – available