Mesin Penggilingan Tempat Tidur - Vertikal

DROOP & REIN FS 130 gke

Kondisi: baik (bekas), Flat-die thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat-die thread rolling & knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW, 1435/2890 rpm -Belt drive: 3-stage adjustable -Knurling plate: RAA 1.0 -Central lubrication Pgjdji Eg Nkopfx Aqvot -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, panjang total: 9.800 mm, lebar total: 4.000 mm, panjang pemakanan sumbu X: 3.500 mm, panjang umpan sumbu Y: 1.100 mm, panjang umpan sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan sumbu Z: 5.000 m/menit, panjang meja: 3.000 mm, beban meja: 6.000 kg, lebar meja: 1.200 mm, daya: 22 kW (29,91 hp), 9597 Psdsy En Dnepfx Aqvjgt

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Pgjdpfxjt Hwt Se Aqvst Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Tekanan 85 t, Panjang tekuk 2050 mm, Jarak antar tiang 1750 mm, Kontrol DELEM, Langkah 215 mm, Kedalaman leher 410 mm, Daya total 13 kW, Berat 8.750 kg, Dimensi mesin 3190 x 2100 x 2375 mm Podpfew Imq Rsx Aqvogt

Kondisi: siap digunakan (bekas), Mașină de rectificat ghidaje SFBZ 1800x4000 Lungime maximă de rectificare, mm: 4000 Lățime maximă de rectificare, mm: 1800 Distanță între coloane, mm: 2200 Înălțime maximă de rectificare, mm: 1250 Dimensiuni masă, mm: 4000 x 1800 Dimensiuni maximă disc de rectificat, mm: 630 x 100 x 305 Pedeuug A Ejpfx Aqvjgt Greutate maximă piesă prelucrată, kg: 15000 Greutate utilaj, kg: 56.000

Kondisi: baik (bekas), Tahun pembuatan: 1984, Kepala penggiling: - daya motor: 2,2 kW - kecepatan spindel: 1.000 - 8.000 rpm - kemiringan spindel (sumbu A): -10° hingga +27° - akurasi pengaturan: 1 menit - pengaturan tinggi (sumbu Y): 130 mm - rentang langkah (sumbu X): 220 mm - langkah osilasi, dapat disesuaikan secara bertahap selama osilasi: 0-30 mm - frekuensi osilasi: 30/60 1/menit Kepala kerja: - pengaturan radius (sumbu Z): 0,01-50 mm - akurasi pengaturan: 0,01 mm - retraksi luncur dari posisi penggilingan ke posisi pengukuran: maks. 49 mm - meja silang, permukaan penjepit: 155 x 205 mm - perjalanan X - Y: masing-masing 60 mm - sudut putar maksimum (sumbu B): 260° Pjdpfjvmpabsx Aqvegt - tegangan suplai: 380 V - berat: 1200 kg Aksesori/opsi: - tekanan penggilingan variabel - proyektor terpasang pada posisi pengukuran - 1 lemari dengan aksesori - berbagai roda penggiling, flens - tangki pendingin - dokumentasi Tersedia di gudang kami.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Pgsdpfouz If Nsx Aqvst Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, diameter cakram: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Maximum disc ring width 175 mm Maximum workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Fully equipped lapping machine, conventional control Psdpjh Invrjfx Aqvegt

Kondisi: bekas, spindeltechnik-120mm-1999-tnc426-kuehlung Pgedpfxoxt El As Aqvjt

Kondisi: bekas, Table unit from a DROOP & REIN gantry milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and extremely robust guideway Table clamping surface: 5500 x 2000 mm Travel path of the table clamping plate: approx. 3100 mm Table height/overall height: 1050 mm Table load capacity: max. 20 tons Ballscrew: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic way cover - Originally from a DROOP & REIN gantry milling machine Pgjdpfxsthuzps Aqvjt - Longitudinal table movement via ballscrew and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive by SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Good condition