Tekan kolom tunggal - hidrolik

DUNKES HF-STS 30

Kondisi: bekas, Tahun pembuatan: 2015, Druck-30t Nsdpfx Agsxz Hfmjlokt

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Nodpfxsqzkdme Aglokt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 906 h, Fungsionalitas: berfungsi sepenuhnya, tinggi pemasangan: 500 mm, kedalaman tenggorokan: 250 mm, gaya penekanan: 30 t, panjang langkah: 400 mm, produsen pengendali: Siemens, Press with only approximately 1,000 operating hours! TECHNICAL DETAILS Press Data: Pressure: 30 t Throat depth: 250 mm Stroke: 400 mm Minimum installation height: 100 mm Maximum installation height: 500 mm Control: Siemens SIMATIC HMI MACHINE DETAILS Total power requirement: 13 kW Nkodsw Dax Uepfx Aglot Dimensions & Weight Machine weight: approx. 3 t Space requirement: approx. 2.5 m x 1.70 m x 2.85 m Operating Hours Total running hours: 2,637 h Working hours: 1,000 h

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: Nsdpfofxyhfjx Aglskt The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), IMM 72780 Double-Sided Polishing Machine Like new condition, the machine has seen very little use. TECHNICAL DATA Polishing disc: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Nkodpfxsu Hanyo Agljt Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or timeliness of the information provided.

Kondisi: baik (bekas), Tinggi center: 195 mm Jarak antar center: 1250 mm Diameter kerja maksimum di atas alas/kereta support: 400/265 mm Lubang/spindle mount: Camlock D1-6"/54 mm Kerucut penerimaan senter tailstock: MK 5 Kecepatan spindle dalam 3 grup, variabel tanpa langkah: 0 - 2500 rpm Feed memanjang: 0,018 - 1,2 mm Feed melintang: 1/2 dari feed memanjang 51 pitch ulir metrik: 0,2 - 14 mm Nkjdpfx Agjxlg Dwsljt 56 ulir inchi: 2 - 56 TPI 20 ulir modul: 0,2 - 3,5 modul 20 ulir diametral pitch: 8 - 56 DP Sambungan listrik: 400 V, 7,5 kW Berat: 1500 kg Dimensi ruang: 2500 x 1300 x 1300 mm

Tahun pembuatan: 1978, Kondisi: bekas, nomor mesin/kendaraan: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Nksdsbx Elispfx Aglot Table size: AT-F 205 x 345 mm Space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V approx. 1/3 power loss), rated at 0.6 kW

Kondisi: baik (bekas), Tahun pembuatan: 1988, panjang penggilingan: 1.000 mm, lebar penggilingan: 550 mm, tinggi penggerindaan: 400 mm, diameter roda gerinda: 400 mm, lebar roda gerinda: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12/1988 Delivery time: immediate Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Nodju Rqynopfx Agljkt Electronic straight dresser with compensation Vertical digital readout Mounting with grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Taper wedges Coolant system with universal paper band filter Complete documentation

Kondisi: baik (bekas), Tahun pembuatan: 2020, 1 alat presetting bekas Merek: DMG Mori / Haimer Tipe: UNO 20/40 Tahun produksi: 2020 Nkodpjw Skltefx Aglot Rincian teknis Rentang pengukuran sumbu X: 200 mm Rentang pengukuran sumbu Y: 400 mm Rentang pengukuran sumbu Z: 400 mm Lebar keseluruhan: 510 mm Panjang keseluruhan: 1.300 mm Tinggi keseluruhan: 1.800 mm Dilengkapi dengan: Paket perangkat Microvision, perangkat lunak Premium-Pro, lemari bawah, keyboard, mouse, printer, berbagai aksesori.

Kondisi: bekas, Tahun pembuatan: 2000, Grinding length: 800 mm Center height: 150 mm Control: FANUC Njdpfx Aju Hag Noglekt Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swiveling: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight approx.: 4.0 t Space requirement approx. (LWH): 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including diamond dresser -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle attachments