Mesin gerinda

ECOLINE Q-SAND 6

Tahun pembuatan: 2022, Kondisi: bekas, Number of sanding units: 6 pcs Max. sanding height: 120 mm Power: 12 kW Sanding machine: ECOLINE QQSAND 6 - Year of manufacture: 2022 - Original price: EUR 89,000 Gedpfx Ahsynntto Rsbi Sanding of individual parts after the planer. Raw surface sanding processing. Sanding on top and bottom surfaces Equipment This sanding unit is equipped with 6 sanding units: - Upper sanding disc, D 400 mm Power: 1.1 kW, equipped with automatic exchange - Upper sanding disc, D 400 mm Power: 1.1 kW, equipped with automatic exchange - Upper sanding brush, D 320 mm, L=250 mm, Power: 1.1 kW - Lower sanding disc, D 400 mm Power: 1.1 kW, equipped with automatic exchange - Lower sanding disc, D 400 mm Power: 1.1 kW, equipped with automatic exchange - Lower sanding brush, D 320 mm, L=250 mm, Power: 1.1 kW System features: - All tools are controlled by frequency inverters. - All sanding brushes are equipped with quick-change individual sanding flaps. - All discs are equipped with air jets to optimize cleaning and cycle duration. - Sanding discs are fitted with Velcro fastener systems. - Controlled start/stop of operations to avoid edge breakage of parts. - The unique sanding system of this machine guarantees best pre-sanding surface results. - Constant pass-through height, PLC, and industrial software allow integration in production lines. - Infinitely variable speed of discs, brushes, and feed thanks to full frequency inverter configuration. - Right/left rotation of discs and brushes with different grit sizes. - Additional adjustments of brushes and discs to optimize abrasive utilization and vary sanding pressure on surfaces. - Low follow-up costs thanks to replaceable flaps. - Low operating noise due to the enclosed machine housing. - Fully enclosed machine housing for a cleaner environment, reduced dust, and protected workspace. - Easy maintenance and setup. - Robust machine base made of steel tubing to guarantee optimum rigidity, stability, and flatness. - All drives of the units operate on linear recirculating ball guides, ensuring high load capacity and precision. - 2 separate, motor-driven feed belts. Gear motors for each belt: 0.37 kW. - Rubber-coated, upper pressure rollers (D 80 mm) located beneath the units to hold workpieces securely during feed. - All units have extraction housings with their respective extraction nozzles. Cover plate with extraction nozzle. - Machine doors equipped with electric safety devices to ensure operator safety. - Machine doors with windows to monitor workpieces during operation. - Feed speed adjustable from 2 to 12 m/min. - Feed direction: right to left. - Steel stop (zero point) on the right-hand side of the machine. Touch panel control 12.7" - The machine is equipped with programmable logic control (PLC). - Control of work cycles via user-friendly touch panel. - Large memory capacity for PLC. - Clear home page display; quick and simple calculation. - Setting of abrasive usage time on touch screen. - Remote service support - Large u...

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Gbjdpedqzcxofx Ah Rei

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min Gjdsvu Hgbjpfx Ah Rsbi - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Gsdpsvnv Uhefx Ah Rebi Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: baru, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-wood sanding machine for sanding solid wood, such as window profiles, etc. Ultra-sturdy high-end design with innovative features. Suitable for heavy-duty, continuous operation even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below 1st belt sanding unit with heavy steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush - Directly driven sanding rollers for slip-free power transmission - Maintenance and wear-free CERMET-coated sanding shoes provide excellent heat dissipation and absolute dimensional stability - External cooling of sanding zones for cooler sanding and extended sanding belt life - Forced pneumatic sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts, equipped with dust and dirt protection Gsdpfjvnv Tqex Ah Rebi - Material removal adjustment underneath via precision lead screw, scale ring with indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension force - Fast sanding belt change with pneumatic belt release - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece conveyance via calibrated, slip and grip proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded, finely adjustable hold-down rollers - Cardan shaft drive for jerk-free and consistent workpiece conveyance - Variable speed feed gearbox motor, 4–20 m/min - All motors with electrical protection - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes Ø 120 x 200 mm, each 0.37 kW - Extraction connections: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc 2740 mm): 2600 mm - Length with control panel (with Softdisc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE conformity ----- Price for the above-mentioned machine upon request! ----- Optional equipment (additional charge): Workpiece air blast: - Arranged at the machine outfeed via nozzles above and below, pneumatically controlled Sanding belt air blast (4-belt): Arranged via nozzles directly at the radii of the tension rollers inside the extraction enclosure, timer-controlled on/off each 5...

Kondisi: bekas, Tahun pembuatan: 2022, Additionally, freight €4,000.00 and installation and commissioning €5,000.00 Sanding Machine B Sand 5 with Partial Rotator Mode of Operation: The panel is placed on the infeed table. It is conveyed into the partial rotator and centered. The panel is sanded in the sanding machine, once in forward and return direction. The panel is then rotated in the partial rotator. The second side of the panel is sanded in the sanding machine. Afterwards, there are two options: either the panel is moved onto the outfeed table and unloaded, or it returns to the infeed table and is unloaded there (the second option increases the processing time). Gedpfxovvkipe Ah Rebi Sanding Machine Equipment: - 1 upper sanding flap roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs to perfectly cut longitudinal and transverse wood fibers. Each with 1.5 kW; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate panel sanding. - All tools are controlled via frequency converters. - All brushes are equipped with quick-change sanding strips without the need to replace the hub. - The discs are fitted with air nozzles to optimize cleaning and cycle time. - Sanding discs feature a Velcro attachment system. - Feed rate and revolutions are controlled by PLC to prevent edge damage to parts. - High-quality sanding on 4 sides thanks to the machine’s consistent material removal. - Automatic and quick changeover of sanding units. - Constant pass-through height; PLC and industrial software allow integration into a finishing line. - Infinitely variable speed for discs, brushes, and feed, based on frequency converter full equipment. - Right/left rotation of discs and brushes with different abrasives. - Individually driven adjustment for discs, rollers, and belts. - Additional setting for brushes and discs to optimize abrasive usage and adjust sanding pressure on surfaces. - Robust frame made from steel tubing guarantees excellent rigidity, stability, and flatness. - Planed top bed ensures optimal parallelism of the working surface for the sanding discs. - All sanding unit carriages utilize linear recirculating ball guides for high load capacity and precision. - Motorized feed belt controlled by frequency converter, 0.55 kW. - Machine doors are equipped with safety interlocks. - Machine doors with viewing windows allow observation of workpieces during processing. - Under the sanding units, there are Ø 80 mm rubber-coated pressure rollers to secure workpieces during operation. - Low operating costs thanks to individual replacement of the flaps. - Low operating noise due to the closed machine housing. - All units have extraction housings with corresponding extraction connectors. Cover plate with extraction socket. - Fully enclosed machine housing for a clean working environment.

Kondisi: sangat baik (bekas), ITALMECCANICA PROFILWOOD MAK6B sanding machine 6 sanding units, each 1.5 kW, maximum working width 250 mm, working depth 0 - 250 mm, minimum. Approximate dimensions (mm): 4700 x 2000 x 2300, Gbsdpfxedykwls Ah Rei Weight (kg): approx. 3000, Comparable to: Makor, Delle Vedove, Venjakob, Flader.

Kondisi: bekas, nomor mesin/kendaraan: 008431, arbeitsbereich_achse_6360 Gbedpfxeym Rphs Ah Rji

Kondisi: bekas, berat muatan maksimum: 2.000 kg, berat keseluruhan: 4.500 kg, pendaftaran pertama: 01/2003, panjang ruang muatan: 7.000 mm, tinggi ruang muatan: 2.700 mm, lebar total: 2.500 mm, tinggi total: 4.000 mm,

Tahun pembuatan: 1986, Kondisi: sangat baik (bekas), For sale: Reckmann LM 161 profile grinding machine. The machine is in very good condition and has seen little use. Gbedpfeuyg Rnox Ah Rsi