Mesin bubut vertikal

EMAG & Lang-Laru VTC 250

Kondisi: bekas, Tahun pembuatan: 2002, Krupp cone crusher Gbjdpfx Asvy Hy Eohujk Model: Krupp Kubria 90/1-08 Year of manufacture: 2002

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Spinner simultaneous turning center with three turrets and comprehensive accessories, spare parts, and tooling is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm. Rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700 rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: stations: 3x12, speed: 8,000 rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2,880mm/2,130mm/1,990mm. Weight: approx. 7,500kg. Operating hours: 27,102h. Control: Fanuc 31i. Including Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, an extensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Gbsdpfsua E Trox Ahusk

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Gjdjxc E H Sopfx Ahusbk Well-maintained gear hobbing machine without feeder/automation Available from: 24.08.2024

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A high-precision Takisawa CNC lathe with dual spindles is available. Spindle power: 2x 7.5 kW, speed: 5,000 rpm, spindle nose: F-80, tool holder: 2x 5 positions, max. turning diameter: 50 mm, max. turning length: 50 mm, max. workpiece weight: 2x 0.5 kg. Machine dimensions X/Y/Z: approx. 2,600 mm/2,550 mm/2,150 mm, weight: approx. 4,300 kg, control: 2x Fanuc Oi-TF, operating hours: 11,179 h. Includes rear chip conveyor, automatic central lubrication, full machine enclosure with coolant pump, portal loader type D, Raku Raku loader, reversing station, automatic loading/unloading doors per spindle, and discharge chute for inspection parts. Documentation available. On-site inspection possible. Gbodpfx Aou Dm Izshuok

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° range and continuous B-axis. Equipped with a 10-station pallet magazine and automatic tool changer with 199 positions. Machine is supplied with the following accessories: Chip conveyor, high-pressure coolant system through the spindle line with separate tank and paper filter. Gbedpfx Ahjku A A Hjuek

Kondisi: bekas, Tahun pembuatan: 2007, Double spindle machining centre in 5-axis configuration (double-sided) Travel paths x/y/z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Gbedpotgu Ixsfx Ahusk Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x Tool breakage monitoring 2 x Clamping bridge supports H75 mm 2 x Clamping bridges 5th axis Coolant unit: Knoll, 70 bar 1 x Chip conveyor KB1000 1 x Drilling head indexing 2 x Tool flatness monitoring systems 2 x Retrofit kits for torsion compensation A-/U-axis

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX Gedpfx Ahslxyp Hsuebk 15” color display, keyboard CNC-Turbo roughness software for WINDOWS TECHNICAL DATA Granite inspection plate (DIN 876) Length x width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed device Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Full enclosure with electrically operated roller shutters  Granite plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual for Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Machine table  Emergency stop button at the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the granite plate  Documentation

Kondisi: bekas, Tahun pembuatan: 2016, Technical details: Gsdpfx Aeudf Evohusbk Weight: 22 t

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Gedpst Hw Nyofx Ahusbk Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Doosan Puma 300MC Poros C, alat penggerak, Sumbu C 360° (0,001°) Tahun 2007 Fanuc 21iTB dengan Manual Guide Chuck 12 inci 315 mm Samchully Lubang spindle 102 mm Gbjdoyrb Urspfx Ahuok Maks. diameter pembubutan 355 mm Perjalanan sumbu: X – 250 mm Z – 680 mm Kepala BMT 65 Tailstock Probe alat Pembuang serbuk, bak dengan pompa pendingin Holder alat Dokumentasi mesin Kondisi sangat baik