Mesin bubut tengah

EMCO EMCOMAT 17D

Kondisi: sangat baik (bekas), EMCO precision lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007, with CE marking 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: ø 340 mm Swing diameter over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Saddle guideway length: 380 mm Turning tool cross section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (support) swivel range: 60 / 120° Main spindle: Lsdpjxx S R Ajfx Aahsak Spindle mount: DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper to DIN 7178 1 : 22 Front bearing spindle diameter: ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard) 0.4 - 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill internal taper: MT3 Quill stroke: 120 mm Lateral offset: ± 13 mm Permissible workpiece weight (unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training applications. Equipment: - EMCO 3-axis digital readout with color display - Potentiometer, EMERGENCY STOP button, digital speed display at the control panel next to the DRO - 3-jaw chuck - MULTIFIX tool post head, size B - Electrically interlocked chuck guard - Quick-change collet system - MICROJET coolant spray system - Chip guard at the rear - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility 'Due to its quality and price, the machine is not suitable for private individuals.' Available from March 2026.

Kondisi: sangat baik (bekas), eyelet punch press Lasdpfx Aswffdroahjk

Kondisi: baru, Machine according to DIN 8605: Lathe with increased precision. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20x20 mm Distance between turning centre and top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount according to DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40–3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4–7.0 mm 32 imperial threads (with optional gear set D3Z200): 56–4 tpi 28 module threads (with optional gear set D3Z200): 0.2–3.5 32 diametral pitch threads (with optional gear set D3Z200): 112–8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights: Between centres: 50 kg Supported with tailstock: 150 kg Other basic equipment (standard accessories): Including machine stand and integrated 3-axis digital readout, German, with colour display 1 longitudinal stop 1 centre, taper 1:22, DIN 7178 1 centre MT3 1 tommy bar 1 wrench 1 grease gun 3 hexagonal bolts M16x60 - DIN 933 3 hexagonal nuts M16-8 DIN 934 1 single tool holder 1 key A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electrical cabinet key 1 operating manual including spare parts list 1 electrical documentation 1 test protocol Packaging (for truck transport with pallet and plastic cover) Machine complies with CE Lodpfjdctnbex Aahoak Note: Images display, among others, special equipment and accessories!

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system Lodpewvuf Tefx Aahsak About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: baru, High-quality bench drilling machine with top-class features. FLOTT TB 15 Plus (212755) Standard Equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Emergency stop push button - Thermal overload protection - Spindle stop - Drill guard with electric interlock - Power cable with Schuko plug - 3-year warranty for single-shift operation Technical Data: Lodpfji Hp D Asx Aahsak Spindle: MT II Drilling depth (mm): 70 Tapping capacity (dependent on pitch): M12 Speed display: Digital Drilling depth display: Digital Drill depth stop: Clamping ring (form-fit) Feed (mm/revolution): Manual Table height adjustment: with rack and pinion Motor Three-phase – frequency controlled, power supply 230 V (kW): 0.75 Continuous/Standard drilling capacity (mm): 15/18 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable work surface (W x L) (mm): 300 x 250 Spindle/Work surface distance (mm): 85-370 (table), 420 (base) T-slot size (arm), Distance (mm), Dimension Width (mm): Cross slots, Number 2, 14/26 Spindle speeds continuously variable (rpm): 40 – 4000 Machine dimensions without packaging (mm): 400 x 520 x 850 Machine dimensions with packaging (mm): 452 x 700 x 1,130 Weight (kg): 65 Note: Further models are available on request.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 720 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D4D194801, diameter putar di atas sled silang: 190 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 3.000 rpm, This machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Centre distance: 700 mm Centre height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool shank cross-section: 20 x 20 mm Main drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible Workpiece Weights Between centres: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle centre height above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout Laodpsv Iqm Sofx Aahok - Infinitely variable speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change tool holders B25/120 - Tool kit - Fixed centre MK 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 470 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D4D210301, diameter putar di atas sled silang: 190 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 3.000 rpm, The machine was used for training purposes only and has approximately 460 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speed: 40 - 3,000 rpm Speed control: Infinitely variable Speed ranges: 4 Speed intervals: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: Morse taper 3 Lajdpfxsv Iqlzs Aahek Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS three-jaw chuck Ø200 (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 - Turning tool set (3 x standard, 1 x parting tool)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Colchester Student 2500 Laodpfx Aasw R S Awehek Digital 3-sumbu Perangkat penjepit collet Berbagai aksesori

Kondisi: bekas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Workpiece height (max.): 2,500 mm Control system: Sinumerik 840D SL X-axis stroke/ram slide: 300 mm X-axis stroke/ram travel: 2,850 mm X-axis working travel without tool: 2,850 mm X-axis working travel with tool changer: 5,000 mm W-axis (crossrail elevation travel): 1,800 mm Tool station/positions: 12 Tool holder interface: HSK 100 (spindle) Workpiece weight capacity: 100 t Table speed: 1 - 50 rpm T-slots: 8 units (36 H12) Ram milling speed: 4,000 rpm Rapid traverse in X and Z axes: 8,000 mm/min Torque for milling: 100,000 Nm Torque for turning: 200,000 Nm Total power requirement: 80 (2x40) kW Approximate machine weight: 140 t Approximate machine dimensions (LxWxH): 11.5 x 6.6 x 8.4 m CNC vertical turning lathe – NEW (The machine pictured is a demonstration model) Application of manufacturing processes: Turning processes, such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short-hole and deep-hole drilling. Milling operations, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end machining. The machine bed, engineered as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. In addition, the table is equipped with hydrodynamic workpiece support. Additional features: - Automatic tool changer - Chuck with 8 jaws, power-actuated spindle, and hardened jaws - Including 40 bar coolant system with filtration unit Lsdpfx Asu Ix H Deaheak - Hydraulic and lubrication systems by ATOS and Dropsa - Equipped with Heidenhain axis measuring system - Renishaw - NEW – with warranty & service via WMW AG

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: Heidenhain, model controller: TNC640, Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 positions Working area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Miscellaneous Ljdpfxotpm Stj Aahjak Rapid traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Electrical cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40