Mesin bubut tengah

EMCO emcoMAT-17D

Kondisi: baru, Machine according to DIN 8605: Lathe with increased precision. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20x20 mm Distance between turning centre and top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount according to DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Tedpfxsdctnbs Af Sod Internal taper according to DIN 7178: 1:22 Spindle diameter in front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40–3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feeds: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4–7.0 mm 32 imperial threads (with optional gear set D3Z200): 56–4 tpi 28 module threads (with optional gear set D3Z200): 0.2–3.5 32 diametral pitch threads (with optional gear set D3Z200): 112–8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights: Between centres: 50 kg Supported with tailstock: 150 kg Other basic equipment (standard accessories): Including machine stand and integrated 3-axis digital readout, German, with colour display 1 longitudinal stop 1 centre, taper 1:22, DIN 7178 1 centre MT3 1 tommy bar 1 wrench 1 grease gun 3 hexagonal bolts M16x60 - DIN 933 3 hexagonal nuts M16-8 DIN 934 1 single tool holder 1 key A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electrical cabinet key 1 operating manual including spare parts list 1 electrical documentation 1 test protocol Packaging (for truck transport with pallet and plastic cover) Machine complies with CE Note: Images display, among others, special equipment and accessories!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, diameter putar di atas sled silang: 190 mm, panjang pembubutan: 700 mm, diameter pembubutan: 340 mm, lubang spindel: 50 mm, Emco EMCOMAT-17D Jarak antara senter: 700 mm Diameter putar di atas tempat tidur: 340 mm Diameter putar di atas suport: 190 mm Lubang/spindel spindle: 50 mm Kecepatan spindle: 35–3000 rpm Kecepatan dapat diatur tanpa langkah di antara rentang gigi. Tsdpfx Afoxc H Dfs Sjd Dilengkapi dengan feed memanjang dan melintang. Pembacaan digital dua sumbu pada sumbu X dan Z. Penjepit alat quick-change Multifix.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 50 mm, EMCO lathe EMCOMAT 17D ex-educational use in very neat condition. Specifications: - Year of manufacture: 2006 Tsdpfx Aju N Dpmof Sjd - Swing over bed: 340 mm - Swing over cross-slide: 190 mm - Distance between centers: 700 mm - Spindle speed: 40–3000 rpm, variable in 4 ranges - Spindle bore: 50 mm Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - Multifix quick-change tool post with 3 holders - coolant system - machine lighting - live center - bed stop - machine feet

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 Tsdpfx Ajwvuf Tsf Ssd >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 470 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D4D210301, diameter putar di atas sled silang: 190 mm, lubang spindel: 50 mm, diameter pembubutan di atas alas geser: 340 mm, tinggi pusat: 170 mm, kecepatan spindel (maks.): 3.000 rpm, The machine was used for training purposes only and has approximately 460 spindle hours. TECHNICAL DETAILS Tsdpfov Iqlzjx Af Sjd Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speed: 40 - 3,000 rpm Speed control: Infinitely variable Speed ranges: 4 Speed intervals: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: Morse taper 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS three-jaw chuck Ø200 (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 - Turning tool set (3 x standard, 1 x parting tool)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 50 mm, tinggi pusat: 170 mm, panjang total: 1.650 mm, lebar total: 1.060 mm, tinggi total: 1.635 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 755 kg, diameter chuck tiga rahang: 200 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The new machine is immediately available from our Stuttgart warehouse. (Subject to prior sale) Whether for prototype construction, maintenance, or—most importantly—training, the conventional and cycle-controlled machines from EMCO bridge the gap, offering maximum precision in a compact footprint along with detailed flexibility. From possible accessories to on-site installation logistics, we are at your service for expert consultation. EMCOMAT 17D Highlights: - Main spindle: DIN 55029 - Tailstock (adjustable off-center) - Single tool holder (with clamping claw) - Belt drive for feed gearbox - Chuck guard with electric limit switch - Optional equipment such as coolant system, sliding chip guard doors, etc. Working area: - Travel in X/Y/Z: 220 / - / 710 mm - Distance between centers: 700 mm - Center height: 170 mm Main spindle: - Max. speed: 3000 rpm Tedpfxodq Rb Aj Af Sod - Spindle mount: Size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Internal taper: MT3 - Quill stroke: 120 mm - Quill internal taper: 50 mm The machine can be inspected in Stuttgart.