Mesin bubut CNC

EMCO Maxxturn 65

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Kwodpfjx E Dncsx Ag Rjw Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: siap digunakan (bekas), lathe_spec_hu Kwjdjxq Hhyepfx Ag Rjw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system along with a dual-spindle setup equipped with C and Y axes for complex machining operations. It is fitted with a 12-position tool turret and a bar feeder capable of handling bars up to 65 mm in diameter and 3200 mm in length. This machine is ideal for precision turning and milling tasks, offering a comprehensive solution for modern metalworking needs. Contact us for more information about this machine. Additional Equipment • Automatic bar loading magazine with adjustable workpiece length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel • Longitudinal movement displacement system Machine Benefits Qualitative Advantages • No need for spindle reduction Kwsdpfxex D H Sfe Ag Rsw Technical Advantages • Cooling: Thermo-compensation system • Axes: C-axis and Y-axis • System: Linear guideway system, digital drive system • PARTS CATCHER: Pneumatically operated finished-part catcher for gentle unloading of finished parts. The finished parts are transferred either to a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm. Max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200–3200 mm • Through-bore diameter: 20–65 mm • Feed rate: 0–627 mm/sec Additional Information Control Unit: Integrated PLC Features: Fully automatic operating cycle, monitoring and error diagnostics (display output) Tools Max. Power: 6.7 kW Max. Torque: 25 Nm Speed range: 0–5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Air requirement: Min. 7 bar Air consumption: 45 L/min Installation Position (Mounting) The mounting kit includes vibration-damping, height-adjustable leveling feet and mounting brackets. Machine History Note: As-new condition machine with only 100 operating hours Dimensions Machine depth: 4500 mm

Kondisi: bekas, Tahun pembuatan: 2008, en Kjdpfsvvtpxex Ag Rsww

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, X/Y/Z: 360/120/750 mm Diameter batang yang dapat dilewati 82 mm Menara cakram dengan 12 stasiun alat bertenaga Sumbu C Sumbu Y VDI 40 Tailstock NC MK 5 dengan pedal kaki Pedal kaki untuk penjepitan di spindle utama Tirai udara Lampu sinyal Perangkat pendingin Konveyor serbuk Rem penahan hidraulis ShopTurn Fungsi Transmit (lintasan silinder pada permukaan selimut dan ujung) iXpanel (ekstensi operasi dan organisasi dari kontrol) Kwedpfx Agjw Nxyao Rew Cawan penjepit Paket alat kecil

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 4.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6CZ1151, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 29.000 W, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, pengumpan batang, de Kwsdpfoxwp I Asx Ag Rew

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: S6AT2502, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 600 mm, kecepatan rotasi (maks.): 5.000 rpm, jumlah slot dalam magazin alat: 12, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 250 mm Travel distance Y-axis: mm Travel distance Z-axis: 600 mm Max. spindle speed: 5,000 rpm Y-axis feed force: 7,000 N Rapid traverse: 12 m/min DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB-SPINDLE Chuck diameter: max. 200 mm Kedewvi Eujpfx Ag Rjww Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Overall height: 2,100 mm Overall length: 5,000 mm Overall width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm CNC control manufacturer: SIEMENS CNC control model: SINUMERIK 840D Number of tool magazine slots: 12 EQUIPMENT Infinitely variable speed adjustment Chip conveyor With Y-axis and sub-spindle 12-station driven tool turret Tool holder: VDI 30 Including 3-jaw chuck (RÖHM, Ø 250 mm)

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 35.800 h, Fungsionalitas: berfungsi sepenuhnya, Doosan Lynx 220LSY – Mesin bubut CNC dengan sumbu counter SPESIFIKASI Kontrol: Fanuc 0iTD Kecepatan maks. spindle utama: 6.000 rpm Daya motor utama: 15 / 11 kW Daya alat penggerak: 3,7 kW Jumlah tempat alat: 12 (24 posisi) Chuck hidrolik 3 jaw: 170 / 135 mm Diameter putar (tempat tidur/revolver): 600 / 400 mm Maks. benda kerja: Ø 300 x 510 mm Diameter batang maks.: 51 mm Gerak cepat (X/Y/Z): 36 m/menit Gerak sumbu Y: ± 52,5 mm Waktu indeks revolver: 0,11 dtk Rentang gerak: - X: 205 mm - Z: 560 mm PERLENGKAPAN Pendinginan tekanan tinggi, 0,7 MPa Trafo Konveyor serpihan Presetter alat Kwedpfxsya Hqbs Ag Rsw Chuck dengan sistem collet (3 collet) Pengumpan batang untuk batang hingga 1,5 meter Pendorong benda kerja Sistem penangkap & transportasi benda kerja Monitoring beban alat

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6AW11S1, diameter putar di atas sled silang: 540 mm, panjang pembubutan: 550 mm, diameter pembubutan: 600 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all stations TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance between spindle and sub-spindle: 1,050 mm Sub-spindle: A2-6, travel distance: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Machine transport dimensions: approx. 3.3 x 1.9 x 2.2 m Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Kedpfx Agow T Sq Tj Rsww Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet fitted with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Control system: MITSUBISHI MELDAS M70 Table dimensions: 910 x 400 mm Max. table load: 960 kg X-axis travel: 760 mm Y-axis travel: 445 mm Z-axis travel: 520 mm Spindle speed: 12,000 rpm Tool holder: MAS BT40 Kedpev H D E Sofx Ag Rsww Drive power: 22 kW Magazine: 22 positions Weight: 4,400 kg Dimensions: 2,200 x 2,200 x 2,700 mm Equipment, Accessories: - Coolant system - Chip conveyor - Manuals