Tekan rem

Ermak

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1998, Gunting plat 3 meter bekas dari Ermaksan Tipe: MGM 3100 8 Kapasitas: 3100 x 8 mm Stop belakang elektrik telah diperbarui Ihodpoyabqpjfx Aa Net Tahun pembuatan: 1998.

Kondisi: baik (bekas), BYSTRONIC HYDRAULIC PRESS BRAKE 3100x150 TON, MAX STROKE 315 mm, FAST DOWNWARD STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST UPWARD STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Ijdjvxipgepfx Aa Neht Y1 Y2: hydraulic ram axes. X axis: backgauge forward and backward movement. R axis: backgauge up and down movement. Z1 and Z2: axes for right and left positioning of gauge fingers. X1 or relative X: axis for forward and backward movement of a single gauge finger. 7 axes in total. The control also manages hydraulic crowning, which can be considered the eighth axis.

Kondisi: baru, Pressing force: 80.0 t Bending length: 2600 mm Frame gap: 2200 mm Throat depth: 250 mm Ram speed: 90.0 mm/sec Working speed: 7.5 mm/min Return speed: 60.0 mm/sec Stroke: 160 mm Installation height: 380 mm Table height: 900 mm Oil capacity: 150 ltr. Operating voltage: 400 Volt Weight: 5227 kg Dimensions (L-W-H): 3750 x 1950 x 2400 mm ----- ECO EXPERT CNC electro-hydraulic press brake with: * DELEM CNC control * CNC-controlled axes: Y1 + Y2 + X axis * Manual table crowning ----- Equipment: - CNC electro-hydraulic die bending press - DELEM CNC control model "DA-58T" * Swivelling operator control panel at the front left - CNC-controlled axes: Y1 - Y2 and X - CNC electro-motorized backgauge * X-axis travel: 800 mm * X-axis traverse speed: 230 mm/s * With ball screw drives - ROLLERI gooseneck upper tool "PS 135.85-R08", System "A" * Including quick-change clamping system * Including crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Manual table crowning, including analog value display - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - Light barrier at the rear of the machine Ihsdpfx Aaoxaafwe Njt - 2x robust front support arms - SIEMENS electrical system - BOSCH/HOERBIGER hydraulic system - CE marking/conformity declaration - Operating manual incl. wiring & hydraulic diagrams

Kondisi: baru, translation-001 Iodoxaalwopfx Aa Neht

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 18.000 kg, tinggi angkat: 11.900 mm, jenis bahan bakar: listrik, tipe tiang: telescopik, tinggi konstruksi: 1.990 mm, berat kosong: 21.650 kg, panjang total: 5.540 mm, jenis penggerak: Elektro, lebar konstruksi: 2.000 mm, Pick & Carry Crane Mast type: Telescopic Technical condition: good Front tires type: Non Marking Rear tires type: Non Marking Remote control Ihsdpfot Dd Uwjx Aa Net

Kondisi: baru, Sheet width 3100 mm Sheet thickness 10.0 mm Sheet thickness for stainless steel 6.0 mm Hold-down clamps 14 units Strokes per minute 13 spm Oil capacity 260 liters Cutting angle 2.0° Throat depth 350 mm Motor power 22.0 kW Backgauge – adjustable 1,000 mm Weight 10,575 kg Dimensions (LxWxH) 4.05 x 2.5 x 2.17 m The manufacturer ERMAK offers you with the hydraulic swing beam shear the HGD series, a robust and durable machine for efficient sheet metal processing. This compact all-round machine enables you to increase your productivity. The hydraulic swing beam shear model HGD assists you with precise, fast, and cost-effective cutting operations in your daily workflow. The use of hydraulic hold-downs for sheet fixation and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet metal types already stored in the material library. After selecting the maximum thickness, the optimum cutting gap is automatically set via the CNC control system electro-hydraulically, but can also be adjusted manually. The position and automatic retract function of the motorized backgauge can be easily set via touch screen. Furthermore, the control offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touch screen control * Including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear Iedpfx Aoxabdbja Nsht - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected functions of the CNC control: * Backgauge pre-selection - X axis * Cutting gap adjustment * Piece count * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting along scribed lines) and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * On precision ball screws * Automatically swing-up at maximum travel for longer cuts * Including selectable retract function ("swing-away function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front supporting arms, with T-slot and mm scale - Ball rollers in the front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for cutting along scribed lines - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at rear of machine (safety device) - Free-moving foot pedal - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Kondisi: baru, en Ihodpoxabfxjfx Aa Nst

Kondisi: bekas, de-01 Iodoru Unbopfx Aa Neht

Kondisi: baru, Sheet width: 4100 mm Sheet thickness: 10.0 mm Sheet thickness (stainless steel): 6.0 mm Hold-downs: 28 units Strokes per minute: 18 Oil capacity: 260 liters Cutting angle: 0.5 - 2° Control system: CYBELEC Cybtouch Motor power: 22.0 kW Backgauge (adjustable): 1000 mm Dimensions (LxWxH): 6100 x 2580 x 2460 mm Weight: 15,100 kg The manufacturer ERMAK presents the HVR series hydraulic swing beam guillotine shear—a robust and durable solution for the efficient processing of sheet metals. This compact, all-round machine will help increase your productivity. The HVR hydraulic guillotine shear supports you in achieving precise, rapid, and cost-effective cuts as part of your daily workflow. Hydraulic hold-downs ensure secure sheet fixation, while the support table with integrated ball transfers guarantees ergonomic and efficient operation for the operator. The CNC control system provides access to a range of pre-configured sheet types in its material library. Upon selecting the maximum thickness and material type, the optimal blade gap and cutting angle are automatically set electro-hydraulically by the CNC system, but can also be adjusted manually. The position and retract function of the powered backgauge can be easily set via touchscreen. Additionally, the controller offers a storage for cutting programs including cutting sequences. ----- Robust electro-hydraulic CNC swing beam guillotine shear * includes CYBELEC CNC touchscreen control * includes CNC electro-hydraulic blade gap adjustment * includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam guillotine shear - Includes CYBELEC CNC touchscreen controller, model "CybTouch 8" Isdpfx Asxabwuja Njht - Key CNC functions: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line), and much more - Motorized backgauge, travel range: 5.0 – 1000 mm (X axis) * Ball screw drives * Automatically flips up at maximum position for longer cuts * Retract function selectable (“Swing-Away function”) * Positioning accuracy: 0.1 mm * Approximate travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line illumination with shadow-line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety feature) - Foot pedal, movable - CE mark / Declaration of conformity - Operating manual + wiring diagram + hydraulic schematic Including special equipment: - Pneumatic sheet support device for thin sheet cutting * Monobloc design

Kondisi: baru, Pressing force 220 t Ihsdsxaathepfx Aa Njt Bending length 4100 mm Frame width 3600 mm Throat depth 410 mm Ram speed 180 mm/sec Working speed 10.0 mm/sec Return speed 160 mm/sec Stroke 275 mm Installation height 550 mm Table height 900 mm Table width 160 mm Oil capacity 300 l Operating voltage 400 Volt Total power requirement 18.5 kW Weight 13,800 kg Dimensions (LxWxH) 5150 x 2250 x 3000 mm The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of pressing forces from 40 to 400 tons to meet your specific requirements. This CNC-controlled press brake can also be extended as a tandem machine, giving you great flexibility in bending lengths. It features numerous options that ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a wide range of options and equipment possibilities to adapt it to your individual needs. The DELEM DA CNC graphical controller allows for convenient operation using touchscreens and offers a comprehensive safety package. The machine is easily operated via an LCD touch screen mounted on the left swing arm. Bending operations are initiated by actuating a foot pedal. In addition to this safety measure, the operator is protected by a safety laser in the working area and a rear light barrier. The CNC control of the press brake automatically calculates pressing force, bending tolerance, crowning settings, embossing force, and tool safety zones. ----- POWER BEND PRO electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC controller, model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color TFT display with high resolution * Bend sequence computation * Product programming and true-to-size display * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-mechanical back gauge * Back gauge with R-axis, equipped with ball-screw drives * Travel: X = 800 mm // R = 250 mm * X-axis rapid traverse speed: 230 mm/s * 2x manually adjustable gauge fingers - ROLLERI gooseneck punch "PS 135.85-R08", System "A" * Including quick-change clamping system * Including crowning device in the tool holder - 1x universal reversible multi-vee die block - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear bearings) - 1x free-standing dual foot switch - CE mark / Declaration of Conformity - Operating instructions including wiring & hydraulic diagrams

Kondisi: sangat baik (bekas), Tahun produksi: 1991 Model: ITPS III Nomor seri: ITPS 80C 25 P1C226 Gaya tekan maksimum: 1800 kN Langkah kerja: 115 mm Daya listrik: 415 V, 50 Hz, 3 fasa Arus nominal: 119 A Ijdpswq Dpqjfx Aa Neht Daya terpasang: 18,5 kW Berat mesin: 4940 kg Nomor inventaris: 9.14 Kontrol: Delem DA-65R Mesin dapat dinyalakan, namun kontrol tidak merespons perintah. Pengguna sebelumnya telah mengganti kontrol AMADA asli dengan DELEM.

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame width: 3,100 mm Iedpfx Asxaa D Hea Noht Hold-downs: 14 units Oil capacity: 150 l Stroke rate: 18 strokes/min Cutting angle: 1.2° Control: CYBELEC CybTouch Total power requirement: 11.0 kW Weight: 6,300 kg Dimensions (L x W x H): 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for cost-effective sheet metal processing with its HGS hydraulic swing beam shear series. This compact all-rounder helps you increase your productivity. The HGS hydraulic swing beam shear supports you in precise, fast, and cost-efficient cutting operations in your daily workflow. Hydraulic hold-downs for securing the sheet and the support table with integrated ball transfers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types saved in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be set manually. The position and retraction function of the motorized back gauge can be easily set via the touchscreen. The control system also offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC Touch Screen control * Including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected CNC control functions: * Back gauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line) and many more - Motorized back gauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at maximum travel range for longer cuts * Including selectable retraction function ("swing-away function") * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Mobile foot switch - CE marking/Declaration of Conformity - Operation manual + wiring diagram + hydraulic circuit diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Kondisi: baru, Pressing force: 320 t Bending length: 4100 mm Frame width: 3600 mm Throat depth: 410 mm Ram speed: 140 mm/sec Working speed: 10.5 mm/sec Return speed: 150 mm/sec Stroke: 375 mm Installation height: 650 mm Table height: 900 mm Table width: 220 mm Oil capacity: 400 l Operating voltage: 400 Volt Total power requirement: 30.0 kW Weight: 22,064 kg Ijdpfxjxaba Ne Aa Nsht Dimensions (HxWxD): 5350 x 2450 x 3150 mm The SPEED BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths ranging from 1,270 mm up to 6,000 mm. It offers a wide selection of press forces from 40-1,500 tons to meet your individual requirements. This CNC-controlled press brake can also be configured as a tandem machine, providing you with maximum flexibility in bending lengths. It is equipped with numerous features to ensure simple and safe operation. The robust machine design, combined with precise CNC control, guarantees long-lasting and reliable performance. In addition, the machine offers a wide range of expansion and equipment options to tailor it to your specific needs. The DELEM DA graphical CNC control enables convenient operation via touchscreens and comes with a comprehensive safety package. The machine can be easily operated via an LCD touchscreen mounted on the left swing arm. Bending operations are initiated by a foot switch. As an additional safety measure, the operator is protected by a safety laser in the working area and a rear safety light barrier. The CNC control automatically calculates press force, bending tolerance, crowning settings, embossing force, and tool safety zones. ----- SPEED BEND PRO electro-hydraulic press brake with: * Increased installation height * Extended cylinder stroke * Increased throat depth ----- Equipment: - DELEM CNC control model "DA-66T" graphic/touchscreen * 2D graphic touchscreen programming mode * 3D visualization in simulation and production * 17" high-resolution TFT color display * Bending sequence calculation * Product programming and display in actual size * USB interface - Swiveling touchscreen control unit, front left - CNC-controlled axes: Y1 – Y2 – X – R – Z1 and Z2, as well as CNC-controlled crowning - CNC electro-motively driven back gauge * Travel range: X axis .. 800 mm // R axis .. 250 mm * Travel speed: X axis .. 500 mm/s // R axis .. 350 mm/s * Ball screw driven * CNC-controlled electro-motive back gauge fingers Z1 + Z2 - Segmental gooseneck upper tool: ROLLERI 135.85.R08, "System A" * Including quick-change clamping * Including crowning device in tool holder - 1x universal reversible die block - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection system in front of machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN linear guides) - 1x mobile double foot switch - CE marking / Declaration of Conformity ...

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Ihodeh Ib T Uspfx Aa Njt Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Pressure: 60.0 t Bending length: 1270 mm Frame width: 1000 mm Throat depth: 410 mm Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 165 mm/sec Stroke: 275 mm Installation height: 530 mm Iodpfxjxabt As Aa Nsht Table height: 900 mm Table width: 90.0 mm Back gauge (adjustable): max. 800 mm Oil capacity: 150 l Operating voltage: 400 V Motor power: 7.5 kW Weight: 4320 kg Dimensions (LxWxH): 2250 x 1960 x 2750 mm Demonstration / demo machine (!!) From our showroom (like NEW) With very few operating hours The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine available in a range of bending lengths from 1,270 mm up to 6,000 mm. It offers a wide selection of pressing forces from 40–400 tons to meet your specific needs. This CNC-controlled press brake can also be extended as a tandem machine, providing you with significant flexibility in terms of bending length. It features numerous functions to ensure simple and safe operation. The robust machine design, in combination with precise CNC control, ensures long-lasting, reliable performance. In addition, the machine offers a variety of upgrade and configuration options to tailor it to your requirements. The DELEM DA CNC graphical control system allows convenient operation via touchscreen and comes with a comprehensive safety package. The machine is operated easily via an LCD touchscreen mounted on the left swivel arm. Bending processes are initiated by actuating a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control of the press brake automatically calculates press force, bending tolerance, crowning setting, coining force, and tool safety zones. ----- POWER BEND PRO CNC Press Brake Special Equipment: * "ERGO" version – operator knee clearance * Flexible articulated arm mount for the control unit * Increased installation height * Extended cylinder stroke * Increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" color TFT high-resolution display * Bending sequence calculation * Product programming and true-to-size representation * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back gauge * Back gauge with R-axis, on ball screw spindles * Travel ranges: X = 800 mm // R = 250 mm * Travel speed X axis: 230 mm/s * With 2 manually adjustable stop fingers - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * Including quick-change clamping * Including crowning device in tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1 die shoe "C 1050-R" - Rear safety device: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electric components - FIESSLER AKAS laser safety device...