Mesin penggigit punch

Ermak RPP 1270 x 30

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 899 h, nomor mesin/kendaraan: SN20090545, gaya punching: 30 t, ketebalan lembaran (maks.): 6 mm, panjang meja: 2.000 mm, lebar meja: 1.270 mm, berat keseluruhan: 11.000 kg, jangkauan kerja: 40 mm, ERMAK RPP 1270x30Tn Punching Machine Year 2009 Fsdjv S Ufyspfx Am Seph Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON hours: 899 hours - Punching hours: 1 hour 6 minutes - Punching force: 30 tons - Maximum capacity: - Sheet thickness: 6 mm - Sheet dimensions: 1270 mm (width) x 2000 mm (length) - Stroke: 40 mm - Axis travel: - X axis: 2000 mm - Y axis: 1270 mm - Travel speed: - X axis: 70 m/min - Y axis: 70 m/min - C axis speed: 100 rpm - Strokes per minute: Up to 700 - Precision: - Positioning accuracy: ±0.03 mm - Position tolerance: ±0.1 - CNC control: GE Fanuc 18i-PB - Oil capacity: 300 liters - Power: 15 kW - Machine dimensions: - Length: 4250 mm - Width: 4000 mm - Height: 2330 mm - Weight: 11,000 kg.

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Fodpfx Amjcxxx Ro Ssph Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Fedpfobn Amfsx Am Soph Total plate height: 350 mm Weight: 11 t

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. Fpodpfxevf E Avs Am Seh - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 1990, I-beam steel, flat 140 x 140 x 13 mm I-beam steel, vertical 120 x 120 x 13 mm Angle steel 130 x 130 x 12 mm Round steel 85 mm Bending capacity – flat bar 125 x 25 mm Fpjdpfett Ecdjx Am Ssh Flat bar on the edge 65 x 65 mm Including various rollers: Tube Ø: 219 mm (Tool/roller Ø 535 mm) 140 mm (Tool/roller Ø 420 mm) 273 mm (Tool/roller Ø 520 mm) 203 mm 168.3 mm (Tool/roller Ø 500 mm) 75 mm (Tool/roller Ø 400 mm) 49 mm (Tool/roller Ø 420 mm) 48.3 mm (Tool/roller Ø 420 mm) 22.5 mm (Tool/roller Ø 420 mm) 32/32.5 mm (Tool/roller Ø 420 mm) 60 mm (Tool/roller Ø 420 mm)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 790 mm, lebar meja: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Fpodpfx Aswffymem Sjh Spindle speeds 50 - 2,500 rpm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Fpodpfxsrx Rxtj Am Soh Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: bekas, Sheet width: 250 mm Outer coil diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. ... m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Fpodpfsfn Aqmex Am Soh Straightener MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and newly repainted.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 1.200 mm, lebar pemotongan (maks.): 1.100 mm, Danobat CP 1211T Bandsäge mit großer Kapazität Fedpfxetv Nadj Am Seph Schnittkapazität Rundmaterial / Vierkant: 1100 mm Schnittkapazität Rechteck: 1200 mm Breite x 1100 mm Höhe Vollautomatisch

Tahun pembuatan: 2004, Kondisi: baik (bekas),