Mechanische - Doppelständerziehpresse
FAGOR TSE2-1000-4000-1600

Name: FAGOR TSE2-1000-4000-1600
Brand: FAGOR
Availability: InStock

Tahun pembuatan

2025

Kondisi

Baru

Lokasi

Spanien

Mechanische - Doppelständerziehpresse FAGOR TSE2-1000-4000-1600

Data mesin

Nama mesin:: Mechanische - Doppelständerziehpresse

Pabrikan:: FAGOR

Model:: TSE2-1000-4000-1600

Tahun pembuatan:: 2025

Kondisi:: baru

Harga & Lokasi

Lokasi:: Spanien

Hubungi

Rincian penawaran

ID iklan:: A21323542

Nomor referensi:: 2034-245

Pembaruan:: terakhir pada 25.02.2026

Deskripsi

Press force: 1000 t
Distance between uprights: 4250 mm
Stroke: 400 mm
Control: SIEMENS S7-1500F
Table dimensions - longitudinal: 4000 mm
Table dimensions - transverse: 1600 mm
Total power requirement: 200 kW
Machine weight: approx. 250 t
Space requirement: approx. 7.5 x 4.8 x 7.4 m
This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!!

DESCRIPTION:
New transfer press!! In storage and has never been set up.
COMPLETE with electronic bar transfer 0 - 800 mm transfer stroke and 500-1300 mm
distance between transfer bars. Lifting stroke = 0-150 mm.
2 x extendable T-slotted tables.
Max. tool total weight: 20,000 kg, upper part: max. 10,000 kg.
Ram counterbalance via pneumatic cylinder.
Automatic pressure setting with target value preset from tool memory.
Lubrication: Main bearings and gears continuously supplied by
circulating lubrication.
LED lighting for tool area. 2 auxiliary control panels, scrap chute panels,
press force measuring device, vibration elements, brand KTI.

Technical data:
Frame design: Transfer press
drive type: mechanical
Windows in side frame: yes
Through hole in table: yes
Sliding table: yes
Number of tables: 2
Press forces
Total nominal force: 1000 t
Press table
Clamping area (left-right): 4000 mm
Clamping area (front-back): 1600 mm
Height above floor: 600 mm
automatic tool clamping: yes
Ram
Stroke: 400 mm
Ram (mechanical press)
Ram adjustment: 300 mm
Strokes per minute: min. 8 /min
Strokes per minute: max. 50 /min
Hydraulic overload protection: yes
Tool installation dimensions
Tool installation height (stroke bottom, adjustment) 766 mm
Distance between uprights (left-right): 4250 mm
Clear lateral passage (width): 1800 mm
Max. tool weight: 20,000 kg
Transfer system
Gripper rail inside width closed: max. 500 mm
Gripper rail inside width open: max. 1300 mm
Electrical connection data
Total power consumption: 200 kW
Connected load: 350 kVA
Supply voltage: 400 V
Network frequency: 60 Hz
Dimensions / weights
Required space length: 7500 mm
Required space width: 4800 mm
Height above floor: 7360 mm
Height below floor: 4000 mm
Total weight: approx. 250,000 kg
Additional press equipment
Light barrier: yes
Cutting shock damping: yes
automatic tool clamping: yes
Hydraulic overload protection: yes
Transfer device: yes
Crjdoym D E Ajpfx Anzeg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2006

55 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+43 5472 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Birmingham

11.802 km

Tekanan air
SchulerEB 2-500

Hubungi

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Crodpfx Anshcnxrozsg Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Lihat detail

Iklan kecil

Birmingham

11.802 km

Mesin Cetak Gambar Hidraulik
SMGHZPU

Hubungi

Iklan kecil

Mesin cetak injeksi vertikal ENGEL e-insert 740H/60 single-C

Berlin

10.804 km

Mesin cetak injeksi vertikal
ENGELe-insert 740H/60 single-C

Hubungi

Iklan kecil

Sodick SL400G (2015) mesin pemotong kawat (hanya 4.355 jam!) Sodick SL400G

Trenčianske Stankovce

10.519 km

Sodick SL400G (2015) mesin pemotong kawat (hanya 4.355 jam!)
SodickSL400G

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Working tank dimensions (W×D): 850 × 610 mm X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: 150 mm V-axis travel: 150 mm Taper angle (on workpiece, thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Maximum wire feed speed: 420 mm/s Wire tension: 3 – 23 N Machining method: Flushing / Immersion Distance from floor to table top: 995 mm Wire spool weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Crodoyu Nqmspfx Anzsg Installation space (W×D): 3,350 × 3,850 mm Machine weight (incl. power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power consumption: 3-phase, 50/60 Hz, 13 kVA External dimensions of dielectric tank (W×D): 700 × 2,155 mm Weight of dielectric tank (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 interchangeable paper filters (internal pressure type) Deioniser: Ion exchange resin (Type 18 L)

Lihat detail

Iklan kecil

Lituania

11.248 km

Okuma MCR-A5C30x65
OkumaMCR-A5C30x65

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with speeds up to 4,000 rpm and can accommodate workpieces with a maximum size of 2,540 mm x 5,540 mm. The machine’s large table, measuring 2,500 × 6,300 mm, supports a proud 30,000 kg. Ideal for heavy-duty milling operations with a rapid traverse rate of 20,000 mm/min. Contact us for more information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2,500 mm x 6,600 mm x 6,350 mm / Weight: 59,000 kg • Maximum workpiece width: 2,540 mm / Maximum workpiece length: 5,540 mm • Table size (width × length): 2,500 mm × 6,300 mm / Max. table load: 30,000 kg / Table height from floor: 850 mm / Effective width between columns: 3,050 mm / T-slot (width × number): 24H7 × 13 Cjdpfx Ajx D S Ekonzerg • Cutting feed rate: 1 to 10,000 mm/min / Rapid traverse: 20,000 mm/min / Table travel X-axis: 6,500 mm / X-axis travel: 6,500 mm / Y-axis travel: 3,500 mm / Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS / Tool magazine capacity: 50 tools / Maximum tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz / Rated power: 513 kVA / Full load current: 741 A / Peak current: 117/138 A / Short-circuit current: 18 kA • Spindle diameter: 100 mm / Spindle speed: 30 to 4,000 rpm • Large table suitable for heavy loads / Large tool storage capacity / High rapid traverse for efficient operations.

Lihat detail

Iklan kecil

Birmingham

11.802 km

Mesin press hidrolik
Kojima1000ton

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 1.000 t, lebar meja: 1.500 mm, tabel jarak ke piston: 1.750 mm, panjang total: 2.700 mm, Gebrauchte 1000-Tonnen Hydraulikpresse zu verkaufen Credpfx Aoucdgponzog 1000-TONNEN-PRESSE SEITENRAHMEN Maximal TYP KAPAZITÄT: 1000 Tonnen DRUCK: 175 kgf/cm² HUB: 1000 mm LICHTSPALT (DAYLIGHT): 1750 mm WERKZEUGAUFLAGE (BOLSTER AREA): 2700 mm x 1500 mm RÜCKZUGSKRAFT (PULL BACK CAPACITY): 52,7 Tonnen ZIEHKISSENKRAFT (DIE CUSHION CAPACITY): 50 Tonnen ZIEHKISSENHUB (DIE CUSHION STROKE): 180 mm HAUPTMOTOR: 415 V, 50 Hz, 6-polig, 110 kW ÖLTANKKAPAZITÄT: 1800 Liter

Lihat detail

Iklan kecil

STAND GANDA PERS EKSENTRIK SGP PEZZ 500/1700/1000

Agios Athanasios

10.049 km

STAND GANDA PERS EKSENTRIK
SGPPEZZ 500/1700/1000

Hubungi

Iklan kecil

Mesin frais tipe planer - kolom ganda WALDRICH COBURG CNC Gantry Type Milling Machine

Bergisch Gladbach

11.257 km

Mesin frais tipe planer - kolom ganda
WALDRICH COBURGCNC Gantry Type Milling Machine

Hubungi

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 17.000 mm, jarak lintasan sumbu Y: 4.800 mm, jarak gerak sumbu Z: 1.500 mm, panjang meja: 16.000 mm, lebar meja: 3.000 mm, kecepatan spindel (maks.): 3.000 rpm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 8 m/menit, pergerakan cepat sumbu Z: 8 m/menit, jarak antara penyangga: 3.800 mm, jenis arus masuk: tiga fasa, posisi kepala milling: vertikal / Winkelkopf, kecepatan rotasi (maks.): 3.000 rpm, jarak meja ke pusat spindel: 2.300 mm, berat keseluruhan: 90.000 kg, hidung spindel: ISO 60 / ISO 50 Adapter, daya motor spindle: 60.000 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy-duty machining | Siemens 840D Retrofit | Ready for production For sale is a high-quality CNC gantry milling machine from the premium manufacturer Waldrich Coburg, in excellent condition. ✔ Machine under power ✔ Inspection and test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrics & control cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large workpiece machining & heavy-duty cutting Technical Data X-axis travel: 17,000 mm Y-axis travel: 4,800 mm Z-axis travel: 1,500 mm Clamping area / bedplates: 16,000 x 3,000 mm Column gap: 3,800 mm Distance table to milling spindle: 2,300 mm Spindle power: 60 kW Speed range: 0.4 – 3,000 rpm Tool holder: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-speed gearbox WFU 250 angle head with automatic indexing WFU 500 angle head with automatic indexing High-speed tapping Tool cart with holders Steel covers for X/Y axes 2 chip conveyors Ideally suited for: Cedey Rrb Ijpfx Anzorg Mechanical engineering Large component machining Power plant construction Shipbuilding Steel and rolling mill industry Contract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Further information, videos, or viewing appointments available upon request.

Lihat detail

Iklan kecil

Witten

11.230 km

Peralatan penempaan
LaskoKGK 063

€22.500

VB ditambah PPN

Hubungi

Iklan kecil

Decoiler- dan Mesin Straightening BAD SALZUNGEN MR + MHD 250/4

Schmölln

10.896 km

Decoiler- dan Mesin Straightening
BAD SALZUNGENMR + MHD 250/4

Hubungi

Kondisi: bekas, Sheet width: 250 mm Outer coil diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. ... m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Crsdpsfn Aqmefx Anzog Straightener MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and newly repainted.

Lihat detail

Beriklan di sini