Beli Fagor Tse2-1000-4000-1600 bekas (14.232)

Kondisi: baru, Tahun pembuatan: 2025, Press force: 1000 t Distance between uprights: 4250 mm Stroke: 400 mm Control: SIEMENS S7-1500F Table dimensions - longitudinal: 4000 mm Table dimensions - transverse: 1600 mm Total power requirement: 200 kW Machine weight: approx. 250 t Space requirement: approx. 7.5 x 4.8 x 7.4 m This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!! DESCRIPTION: New transfer press!! In storage and has never been set up. COMPLETE with electronic bar transfer 0 - 800 mm transfer stroke and 500-1300 mm distance between transfer bars. Lifting stroke = 0-150 mm. 2 x extendable T-slotted tables. Max. tool total weight: 20,000 kg, upper part: max. 10,000 kg. Ram counterbalance via pneumatic cylinder. Automatic pressure setting with target value preset from tool memory. Dodpfoym D E Aex Anzekt Lubrication: Main bearings and gears continuously supplied by circulating lubrication. LED lighting for tool area. 2 auxiliary control panels, scrap chute panels, press force measuring device, vibration elements, brand KTI. Technical data: Frame design: Transfer press drive type: mechanical Windows in side frame: yes Through hole in table: yes Sliding table: yes Number of tables: 2 Press forces Total nominal force: 1000 t Press table Clamping area (left-right): 4000 mm Clamping area (front-back): 1600 mm Height above floor: 600 mm automatic tool clamping: yes Ram Stroke: 400 mm Ram (mechanical press) Ram adjustment: 300 mm Strokes per minute: min. 8 /min Strokes per minute: max. 50 /min Hydraulic overload protection: yes Tool installation dimensions Tool installation height (stroke bottom, adjustment) 766 mm Distance between uprights (left-right): 4250 mm Clear lateral passage (width): 1800 mm Max. tool weight: 20,000 kg Transfer system Gripper rail inside width closed: max. 500 mm Gripper rail inside width open: max. 1300 mm Electrical connection data Total power consumption: 200 kW Connected load: 350 kVA Supply voltage: 400 V Network frequency: 60 Hz Dimensions / weights Required space length: 7500 mm Required space width: 4800 mm Height above floor: 7360 mm Height below floor: 4000 mm Total weight: approx. 250,000 kg Additional press equipment Light barrier: yes Cutting shock damping: yes automatic tool clamping: yes Hydraulic overload protection: yes Transfer device: yes

Kondisi: baru, Lifting capacity in kg: 1,000 kg Reach: 4,000 mm Height: 3,000 mm (underside of jib) Total column height: 3,790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable system Djdpsxak Hxefx Anzekt - Drag cable, cable sag approx. 800 mm - Floor-controlled operation via pendant controller Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-fall - Painted in RAL 5017 traffic blue - Lifting capacity: 1 t - Hook path: 3,000 mm - Maximum hook position: 2,442 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-stage (pole-changeable): 1.3 / 5 m/min - Lifting power: 0.22 / 0.9 kW - Duty cycle: 60% ED - Switching frequency: 360 cycles/hour Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set), size LS 200 - Comprising 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation mounting, incl. grouting accessories For the alignment of the slewing jib crane, an assembly gap between the base of the column and the building floor must be provided. This assembly gap is to be grouted by the customer after approx. 4 weeks of crane operation. The illustration shows a similar crane system.

Kondisi: bekas, Detail Teknis: Tinggi: 1600 mm Lebar: 1270 mm Kedalaman: 1000 mm Tersedia 3 buah sudut penjepit Alur-T sesuai dengan DIN 650: Dkjdpfx Aju N Ea Hjnzot a=35mm; b=60mm; c=27mm; h=65mm Harga per sudut

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Studer S40 1000/1600 Grinding length: 1,000 / 1,600 mm Centre height: 175 mm (optionally higher possible) Workpiece weight: 120 kg Additional selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC - Fast setup via GSN operator interface Dodpfxsfg S Uaj Anzskt - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Centre height increase - Dressing spindle for diamond profile roll - Balancing and contact-detection sensors - Hydraulic tailstock clamping / releasing - Automatic Siemens door drive - 19" / 22" monitor - Remote maintenance - Conversion to needle nozzles - Matching coolant extraction/filter system - Automation preparation - And much more We are also happy to overhaul your existing stock machinery! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Schaudt PF61 1000 - 4000 Grinding length: 1,000 / 2,000 / 3,000 / 4,000 mm Centre height: 260 mm Additional configurable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC control - Fast setup via GSN operator interface - Diatronic measuring system - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Increased center height Djdoiqxt Hspfx Anzokt - Dressing spindle for diamond profile roll - Balancing and touch detection sensors - Hydraulically clamping / releasing tailstock - Automatic Siemens door drive - 19" / 22" monitor - Remote maintenance - Retrofit to needle nozzles - Suitable coolant / extraction system - Automation preparation - and much more. We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella, and many more.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, daya laser: 4.000 W, Max. working area X: 3050 mm Max. working area Y: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 21 tool stations and 4 clamps - Drives with maintenance-free three-phase motors - Rerun device with programmable hold-down - Foot switch for closing clamps - 2 containers for good parts - Automatic shut-off Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine Dsdpfx Anjy Saqgszokt - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable hold-down force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Bulge detection - Flap for punched parts 500 x 500 mm - Monitoring of fill level height in the punching console Control - Open control system based on Bosch Rexroth IndraMotion MTX - Operator panel with 15" TFT touchscreen - Program management and 80 GB storage space - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Multibeam light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown hydraulics - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-damped installation - Thread forming function - MultiTool function - Chip conveyor with tilting bin - Active die - Ejection unit for small parts - Brush tables with loading aid - Marking function - Rerun cylinder - Bulge detection

Kondisi: baru, plattenbreite4000mm1 Djdpfxeyk Ikwe Anzekt

Kondisi: bekas, Tahun pembuatan: 1998, Transnorm incline conveyor, decline conveyor, belt conveyor, conveyor belt with pre-conveyor GF 25000+4000-1000-900 RA2288 Technical Specifications: - Conveyor length (NL): 29,000 mm (25,000 mm incline segment + 4,000 mm pre-feed) - Frame width (NB): 1,000 mm, 1,000 mm with motor - Belt width (GuB): 900 mm - Overall height (BH): 80 mm, 430 mm with motor - Angle: freely adjustable between 0 and 15° - Support legs: optionally available - Conveyor speed (v m/s): 0.2 - Drive: SEW gear motor - Electrical data: 50Hz, 380-500V, 2.2 kW S1 - Drive drum: Ø = 81 mm Dksdpfxstp Tv Es Anzot - Belt return roller: Ø = 81 mm Optional accessories: - Supports - Side guides, single or double-sided - Frequency inverter for stepless speed adjustment - Length adjustment (longer/shorter) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl-001 Dkjdjy T Sdzepfx Anzst

Kondisi: baru, Tahun pembuatan: 2026, Trafo distribusi 3 fasa kering tipe kering baru, berlapis epoksi dari produsen TESAR Italia, tersedia: 3 unit 400kVA, 2 unit 630kVA, 2 unit 1000kVA, 1 unit 1250kVA, 2 unit 1600kVA, 2 unit 2000kVA, 1 unit 2500kVA, tegangan 22000 (± 2 x 2,5 %) / 400V; Dyn1/5/11 (pilihan), IP00, rugi-rugi sesuai Ecodesign 2, dokumentasi proyek, protokol unit, manual, belum dibuka, garansi 2 tahun, tersedia segera di stok. Dsdpfx Aehybc Nonzokt

Kondisi: diremaj di bengkel (bekas), Completely overhauled external and cylindrical grinding machine LŽT Kikinda, model AFC 630/1000/1600/2100 and UFC 630/1000/1600/2100 Machine specifications: - Max. distance between centers: 630/1000/1600/2100 mm - Center height: 180 mm - Max. workpiece diameter: 360 mm - Max. workpiece weight: 300 kg - Grinding wheel dimensions: 500x203x100 mm - Machine accuracy: max. 5 microns - Electrical components: ABB, Schneider - Final paint finish according to customer preference Dkedpfov Tavmsx Anzjt Warranty for works: 6 months Delivery time: to be agreed For more information, please call.

Kondisi: baik (bekas), Tahun pembuatan: 2009, diameter rotor: 1.000 mm, lebar rotor: 1.600 mm, Hammer mill Working width: 1600 mm Dkjdpfei E S Sqjx Anzet Rotor diameter: 1000 mm Drive: 75 kW Application area: Size reduction of all impact-brittle materials such as: - impact-brittle plastics - electronic scrap (e-waste) - wood waste - mineral insulation material waste (e.g., glass wool, rock wool, etc.)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: MIKA Seilzüge, demag-dr-seilzug-en Dksdpfxey D D S Sj Anzjt

Kondisi: bekas, Detail Teknis: Djdpfx Anszx Rmvozjkt Total daya nominal: 1000 ton Luas penjepit (kiri-kanan): x mm Luas penjepit (depan-belakang): x mm Luas meja: 4500 X 2400 mm Total daya nominal: 2-3-4-5-pres - 1000 ton. Luas meja: 2-3-4-5-pres 4500 X 2200 mm Revisi terakhir pada tahun 2021, terdiri dari: Sistem otomatisasi pelat, pabrikan Neuhäuser, tipe 19711505-00, tahun pembuatan 2000, nomor seri 367080, nomor material FK35835, dengan sistem pencuci pelat terintegrasi, pabrikan AMTEC, pelumas, stasiun pemuatan dan pembongkaran palet, gerobak pengganti palet, kontrol, pabrikan Siemens, nomor sistem 0907500. Penjepit pelat, nomor sistem 0608300, dipasang pada pres. Pres rangka ganda (MK11165), pabrikan Weingarten, tipe ZS 1600.48, tahun pembuatan 1965, Nomor pesanan 324/64, aksi ganda, tekanan pres sekitar 1.000 ton, langkah 900 mm, penyesuaian langkah 350 mm, jarak antara permukaan meja dan plunger 2.150 mm, kekuatan penjepit pelat 600 ton, langkah 700 mm, penyesuaian 350 mm, tinggi bebas antara permukaan meja dan penjepit pelat 1.940 mm, kedalaman penarikan maksimum 300 mm, jumlah langkah 12/menit, lebar rangka sekitar 5.000 mm, ukuran meja sekitar 4.500 x 2.400 mm, kontrol, pabrikan Siemens, tipe S7. Sistem otomatisasi pelat, pabrikan ABB, terdiri dari: 2 penjepit pelat, dipasang pada pres, nomor sistem 0608400, 0608500, stasiun pemutar dan pembalik pelat, pabrikan ABB, dapat dipindahkan, nomor sistem 0701500. Pres rangka ganda (MK11166), pabrikan Schuler, tipe P4E2 SQB 1000/4.5/0.7, Aksi tunggal, tekanan pres sekitar 1.000 ton, langkah plunger 700 mm, penyesuaian plunger 400, jumlah langkah 14/menit, jarak antara rangka 4.560 mm, ukuran meja 4.500 x 2.200 mm, ukuran plunger 4.500 x 2.200 mm, jarak antara permukaan meja dan permukaan plunger 1.550 mm, perangkat penarik 300 ton, langkah 250 mm, nomor sistem 0186200, kontrol, pabrikan Siemens, tipe S7. Sistem otomatisasi pelat, pabrikan ABB, terdiri dari: 2 penjepit pelat, nomor sistem 0608600, 0608700, dengan meja penumpuk dan pembalik yang dapat dipindahkan, nomor sistem 0702000. Pres rangka ganda (MK11167), pabrikan Schuler, tipe P4E2 SQB 1000/4.5/0.7, Aksi tunggal, tekanan pres 1.000 ton, langkah plunger 700 mm, jarak antara rangka 4.560 mm, penyesuaian plunger 400 mm, jumlah langkah 14/menit, permukaan meja 4.500 x 2.200 mm, permukaan plunger 4.500 x 2.200 mm, jarak antara meja dan permukaan plunger 1.550 mm, nomor sistem 0186300, kontrol, pabrikan Siemens, tipe S7. Sistem otomatisasi pelat, pabrikan ABB, terdiri dari: 2 penjepit pelat, dipasang pada pres, nomor sistem 0608800, 0608900, dengan meja penumpuk dan pembalik pelat, nomor sistem 0702100. Pres rangka ganda (MK11168), pabrikan Schuler, tipe P4E2SQB 1000/4.5/0.7, Aksi tunggal, tekanan pres 1.000 ton, langkah plunger 700 mm, jarak antara rangka 4.560 mm, penyesuaian plunger 400 mm, jumlah langkah 14/menit, permukaan meja 4.500 x 2.200 mm, permukaan plunger 4.500 x 2.200 mm, jarak antara meja dan permukaan plunger 1.550 mm, nomor sistem 0186300, nomor sistem 0186400, kontrol, pabrikan Siemens, tipe S7. Sistem otomatisasi pres, pabrikan ABB, terdiri dari: 2 penjepit pelat, dipasang pada pres, nomor sistem 0609000, 0609100, dengan meja penumpuk dan pembalik pelat, nomor sistem 0702200. Pres rangka ganda, pabrikan Krup, tipe DPQV4-1000, nomor seri 2602, tahun pembuatan 1968, Aksi tunggal, tekanan pres 1.000 ton, langkah penyesuaian plunger 400 mm, langkah plunger 700 mm, jumlah langkah 14/menit, jarak antara permukaan meja dan permukaan plunger 1.55

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: STYLE CNC Machines, jumlah slot dalam magazin alat: 24, produsen motor: FANUC, Pengiriman setelah konsultasi Ref: 24F048 Tahun pembuatan: 2025 Kondisi: Showroom Djdpfx Anjw Ty S Sozjkt Spesifikasi: - Sumbu X: 4000 mm - Sumbu Y: 1000 mm - Sumbu Z: 1000 mm - Motor utama 26 kW (S6) - 8000 rpm - BT-40 - Penukar alat otomatis (24 posisi) - Layanan jarak jauh (IXON) + koneksi jaringan - Pompa pendingin lebih kuat incl. semprotan - Ditingkatkan ke perangkat lunak STYLE terbaru yang tersedia

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 12.100 h, Produsen TRUMPF Tipe TruMatic 1000 - 1600 Fiber (K07) Tahun 2018 Jangkauan X 3000mm Daya Laser Nominal 3000 Watt Kontrol Bosch CML 45 Gaya Penekanan 16,5 ton Ketebalan Maksimum Lembaran 6,4 mm Berat Material Maksimum 150 kg Konfigurasi Standar Mesin: ⦁ Rangka kotak ⦁ Sistem sumbu hybrid ⦁ Majalah linier dengan 20 stasiun untuk penjepit dan alat ⦁ Penjepit hidraulik (3x) ⦁ Penggerak dengan motor arus bolak-balik bebas perawatan ⦁ Perangkat penekan dengan kaki penekan yang dapat diprogram ⦁ Sakelar kaki untuk menutup penjepit ⦁ Saluran pengeluaran komponen kanan ⦁ Pintu pengeluaran komponen kiri ⦁ Sensor untuk pintu pengeluaran komponen ⦁ Penerangan area kerja ⦁ FocusLine ⦁ SortMaster Compact dapat dipasang tambahan Laser TRUMPF ⦁ Kabel laser sesuai tata letak standar (10m) ⦁ Kendali daya laser ⦁ Fitur log laser ⦁ Panduan berkas tertutup melalui kabel cahaya laser (LLK) ⦁ Suplai daya terpisah untuk TruDisk Unit Pemotongan Kompak ⦁ Sistem pemotongan laser padat kompak ⦁ Kaca pelindung ⦁ Perlindungan terhadap tabrakan ⦁ ControlLine Kepala Punching ⦁ Penggerak Delta ⦁ Adaptor alat tunggal berputar ⦁ Posisi kaki penekan yang dapat diprogram ⦁ Kompensasi panjang alat ⦁ Pelumasan semprot punch ⦁ Vakum limbah punch ⦁ Fungsi pembentukan ⦁ Counter stroke punch Kontrol ⦁ Kontrol TRUMPF berbasis Rexroth IndraMotion MTX ⦁ Panel sentuh dengan layar TFT warna 19" ⦁ Data teknologi terintegrasi ⦁ Tekanan gas potong yang dapat diprogram ⦁ Antarmuka untuk perawatan jarak jauh ⦁ Pemutusan otomatis dengan fungsi siaga ⦁ Manajer program ⦁ Rencana produksi Opsi: Paket pemotongan tembaga Paket pemotongan kuningan Pemotongan dengan udara tekan Pendorongan keluar komponen kecil Meja sikat Multitool Sensor saluran bagian Penandaan Alur Cepat Dedpfx Aszgfnqonzskt Multibend Pembentukan ulir Teknologi rol deburring Fungsi sortir saluran bagian Clamping hydraulis bergerak vertikal

Kondisi: sangat baik (bekas), Nomor katalog 7268 DATA TEKNIS - ukuran hopper atas panjang/lebar: 1000x600 mm - ukuran hopper bawah panjang/lebar: 650x600 mm - lebar rotor: 570 mm - motor: 15 kW - saringan: 16x12 mm - ukuran pisau: 40x70 mm - jumlah pisau: 18 buah - auto-reverse - laci penekan - motor pompa: 0,75 kW - dimensi panjang/lebar/tinggi: 1900x1450x1450 mm - berat: 1040 kg KEUNGGULAN – produk buatan Jerman – belum dicat ulang – kondisi sangat baik – mesin cacah bekas Dksdpfx Anezxhh Dezot Foto asli Video pengoperasian mesin: youtube.com/watch?v=fSKMkMPlp-8 Harga netto: 29.900 PLN Harga netto: 7.120 EUR sesuai kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar)

Kondisi: baik (bekas), Manfred Rachner R 1000 P, Mesin Pembalik Palet Kertas Mesin ini dalam kondisi seperti baru dan siap digunakan. Spesifikasi teknis: Ukuran: 1285 x 800 mm Tinggi tumpukan: 1330 mm Kapasitas beban: 1000 kg Dkodpezw T Awjfx Anzot Berat mesin: 850 kg Catu daya 380V Panel kontrol, pengoperasian cepat, penggerak hidrolik. Pengoperasian yang tenang. Desain ringkas, hemat tempat.

Kondisi: baik (bekas), Polar Mohr LW 1000-4, Alat Pengangkat Tumpukan Kertas Perangkat ini dalam kondisi teknis dan visual yang sangat baik. Ini adalah model produksi saat ini. Dedpjzw Tzyefx Anzskt Penggerak hidrolik. Catu daya 380V. Siklus pengangkatan otomatis yang dikendalikan oleh sel fotolistrik atau mode manual, pengoperasian cepat. Kapasitas beban: 1000 kg. Dimensi palet: 1200 x 800 mm.

Kondisi: sangat baik (bekas), lebar kerja: 240 mm, tinggi penyerutan: 160 mm, diameter spindel: 50 mm, lebar perataan: 240 mm, tinggi kerja: 160 mm, lebar total: 240 mm, kecepatan spindel (maks.): 7.000 rpm, kecepatan spindel (min.): 7.000 rpm, weinig_unimat_1000 Djdpfezbz Uksx Anzekt

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tinggi material maksimum 80 mm. Dimensi meja kerja 2000x1000 mm. Jarak bebas lengan 1600 mm. Daya motor 0,75 kW. Dkodpozxpwysfx Anzst

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, tinggi kerja: 650 mm, nomor mesin/kendaraan: SM20215245, Perlengkapan: dokumentasi / manual, Mesin Lantech C-1000 yang terawat baik, model baja tahan karat untuk sisi kanan, produksi tahun 2011. Model baja tahan karat (RVS). Dksdpfx Aet Dn Hqonzot Kecepatan +/- 25 kotak per menit, cocok untuk kotak lipat Amerika yang dibuka dari sisi kanan/Fefco 0200/0201. Lantech C-2000, C-1000, C-300, C-400, menggunakan perekat lelehan panas Nordson.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.000 kg, beban meja: 1.000 kg, 1 Dkodoxbh Dqspfx Anzjt

Kondisi: baik (bekas), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We are offering here a used workbench frame from the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in the scope of delivery: 02x workbench legs, new Material finish: sendzimir galvanized Leg height: 900 mm Leg depth: 1,000 mm Including cross and diagonal braces, base plates The legs are pre-assembled (bolted truss construction) 04x workbench beams, used Material finish: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Design: fully galvanized The images serve to illustrate the material. The material color may differ. - The workbenches are picked unassembled; - The workbench legs are pre-assembled; Dodpshm Sr Sofx Anzjkt - The production time is usually approx. 3 - 5 working days.

Kondisi: sangat baik (bekas), The scope of delivery includes: 02x Workbench Stands, used Dkedoi Ewqyopfx Anzst Material finish: sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted lattice construction) 04x Workbench Beams, used Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x Locking Pins, new Design: fully galvanized 01x Chipboard Panel, 2nd choice, used Panel thickness: 38 mm Panel width: 2,580 mm Panel depth: 1,000 mm Surface: possibly coated (possibly two-piece) 01x Chipboard Panel, 2nd choice, used Panel thickness: 38 mm Panel width: 2,380 mm Panel depth: 1,000 mm Surface: possibly coated (possibly two-piece) 16x Self-drilling Screws, new Version: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. Material color may vary. The chipboard panels may be coated or uncoated. - Workbenches are dispatched unassembled; - The workbench stands are pre-assembled; - Usual production time is approx. 5 working days.