Mesin press Famad

FAMAD

Kondisi: sangat baik (bekas), Nomor katalog 7721 DATA TEKNIS - Lebar kerja: 1300 mm - Tinggi maksimum pass-through: 60 mm - Rol karet: 2 pcs - Diameter rol karet: 190 mm - Motor sekitar 1,1 kW - Dimensi (P/L/T): 2020x770x1260 mm - Berat: 500 kg KEUNGGULAN – mesin pengaplikasi lem bekas – kondisi sangat baik Harga netto: 14.900 PLN Rbsdpfxjx Tgvfo Abust Harga netto: 3.540 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi yang signifikan)

Kondisi: hampir baru (bekas), panjang talang 2,7 m lebar talang 440 mm tinggi 1430 mm Rbjdpeyaa Rbefx Abust saklar pengaman

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, The single-spindle PDFD finger jointing line consists of two main devices: the DFC 60M tenoning and finger jointing machine (for machining the ends of lamellas) and the PHSL lengthwise finger jointing press, where the elements are joined into lamellas up to 6.6 meters long. Input package width for the tenoning and finger jointing machine: 650 mm Rsdpew Hrm Nefx Abujbt Width of the glued elements: 30 ÷ 155 mm Length of the glued elements: 170 ÷ 900 mm Thickness of the glued elements: 20 ÷ 70 mm Compressed air demand: 18 m³/h Working efficiency: approx. 2 cycles/min. (lamella 6600) Length of the finished, glued element: up to 6600 mm The machine is in excellent technical condition!

Kondisi: bekas, Data teknis: 3 bagian dengan panjang 6400 mm Bagian press dapat bekerja bersama atau secara individual Ukuran maksimum elemen yang direkatkan: 4600x1180x200 mm per bagian Rbedpfx Aox Id Disbuot Penjepit hidrolik atas/vertikal: 24 unit – 8 per bagian Penjepit vertikal depan yang dapat digerakkan: 24 unit – 8 per bagian Daya listrik: 400 V Daya motor: 2,2 kW Dimensi keseluruhan: Panjang: 19.200 mm Lebar: 1200 mm Tinggi: 2300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Press through-feed HPPA buatan Famad Paczków, tahun produksi 2020. Rbsdpfx Ajvla A Dsbust Press ini digunakan untuk pengeleman melalui paket pintu, papan MDF, multipleks, veneer, dll. Dilengkapi dengan konveyor rantai yang diangkat secara pneumatik untuk pemuatan dan pembongkaran. Dapat beroperasi secara mandiri atau sebagai bagian dari lini produksi.

Kondisi: bekas, Tahun pembuatan: 2016, The PDFD line consists of two primary components: the DFC 60 tenoning and profiling machine (where the ends of the slats are machined) and the PHSL longitudinal finger-jointing press, which joins elements into slats up to 6.6 meters in length with the option to program up to eight intermediate cuts, dividing the slat into sections of operator-defined length. Between these main machines, there are transport units that also perform initial tenoning. The presented line configuration allows for a productivity rate of approximately 8,500 to 10,500 linear meters per shift. The machine has undergone a complete overhaul and comes with a one-year warranty. A microprocessor-based control system enables flexible adjustment of work parameters to suit user requirements. The machine can process both ‘calzing’-type elements and components for the production of edge-glued panels (‘line-jointed’). The implementation of a receiving table with automatic feeding of slats onto the PHSL press infeed conveyor allows for operation of the line by a single operator handling material input. The receiving table is equipped with a buffer shield, which increases efficiency and smooth workflow. The line operates in an automatic cycle with manual material feeding. The line’s components can be assembled in various configurations (to be agreed with the buyer), allowing the machine to be adapted to user’s facility layout. Technical Specifications: - Maximum input package width (tenoning and profiling machine): 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air requirement: approx. 25 m³/h - Operating efficiency: up to 4 cycles/min (6,600 mm slat) - Length of glued element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz Rbedpfxoc U Txke Abuot - Control voltage: 24 V DC - Power requirement: max 100 kW Operating process: Wooden slats are placed by the operator onto the cart of the first tenoning and profiling machine. Feeding the pieces initiates the machining cycle. The first machine evens up the ends of the package and then cuts the finger-joint pattern. The package then moves to the table of the second machine, where the opposite side is machined and glue is applied. Elements from the DFC-60 D tenoner are transported via a chain conveyor to the preliminary tenoning unit, where a set of rollers and a pressure device apply initial pressure to the finger-joint profile on the scantlings prior to entering the press. The pre-tenoned scantlings are conveyed onto the press table; once the target length is achieved, they are cut. Then, using a pusher bar and clamping strip, they are transferred into the press bed area for pressing. The glued and pressed, finished slat is pushed onto the press's outfeed table. While the scantlings are moved to the press bed, the process of feeding elements onto the press table is carried out simultaneously, maintaining continuous press operation for higher gluing productivity.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Window scantling glue applicator. Roller width: 250 mm. Includes dosing troughs. The applicator is equipped with a glue tank and top-mounted doser. Machine after refurbishment. Applicator rollers are new. The machine features an infeed and outfeed conveyor. Fully functional, complete, and overhauled. Rodpfx Aot N H R Eobuebt

Kondisi: sangat baik (bekas), Lebar kerja maksimum 9000 mm Tinggi kerja maksimum 1100 mm 6 bagian penekan atas, masing-masing 1520 mm Rsdpsxnwpiofx Abuobt 18 penjepit depan Lebar total 13000 mm Tinggi total 2200 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements Rbodpfx Abstrl R Aeuet The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.

Kondisi: baru, Tahun pembuatan: 2023, en-1 Rbsdpfx Abjpy Eb Uouot