Mesin pengikat tepi

FELDER G400

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Nedpfx Aoxyiiljhwswc

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Abmessung des Schiebetisches: 2200 x 375 mm Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Njdpfx Asdnxydohwowc Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm Nodpfsv S Hy Ajx Ahwswc blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, also known as a panel saw with scorer. It is an ideal solution for cutting and processing various materials, primarily wood, chipboard, MDF, and other wood-based panels. Construction and Design: The Cormak MJ45-KB4 is a robustly constructed woodworking machine featuring a durable steel frame for stability during operation. The large work table rides on hardened steel rods, with a carriage length of 3200 mm, equipped with cutting units to ensure efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring unit, which pre-cuts the underside of the board to relieve internal stress within the wood. This prevents splintering and reduces the likelihood of material deformation after cutting. The scoring motor’s power of 0.75 kW ensures reliable scoring performance. Main Saw Blade: The Cormak MJ45-KB4 panel saw comes with a primary circular saw blade powered by an electric motor, enabling precise cuts through various materials. With a blade diameter of 350 mm, the maximum cutting height reaches up to 105 mm. Manual Scoring Adjustment: The straightforward and effective manual adjustment of the scoring unit allows for quick and accurate setup. Index stops make it easy to return to previous settings, while the intuitively located adjustment controls allow operators to make changes without interrupting workflow. Panel Saw Features: Large Working Surface: Equipped with a spacious working area, this panel saw enables comfortable handling of large material sheets. Smooth Carriage Travel: The feeding system uses precision-hardened steel guides with steel ball bearings for effortless longitudinal cutting, even with large panels or plywood sheets. Angle and Depth Adjustment: The cutting angle and cutting depth can be easily adjusted, allowing customization for specific project requirements. Safety Systems: The panel saw is fitted with safety features such as blade guards and emergency stop systems for safe operation. Applications: Panel saws with scoring units are mainly used in woodworking and window manufacturing workshops for cutting wood and wood-based materials. They are particularly suitable for cutting boards, chipboards, MDF panels, and similar materials. The Cormak MJ45-KB4 stands out for its high precision. Technical Specifications: Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width at rip fence: 1250 mm Cross-cutting capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade cutting height: 0-105 mm Saw blade cutting height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Nodpfx Ahotz Smiowewc Main motor power (S1/S6): 5.5 kW / 9 HP Scoring motor power (S1/S6): 0.75 kW / 1.2 HP Main dust extraction port diameter under table: 100 mm Blade guard extraction port diameter: 80 mm Machine weight: 680 kg The saw is sold without cutting blades. Price does not apply to machines sold in Poland.

Kondisi: sangat baik (bekas), Perlengkapan: doser, Penyesuaian listrik untuk ketinggian dan sudut mata gergaji; pisau scoring. Anda dapat menelepon atau menulis kepada kami. Kami dapat berbicara dan menulis dalam bahasa Jerman dan Rusia. Anda juga dapat mengirim pesan dalam bahasa Inggris. Nodpfow Ix Alox Ahwewc

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: KK052469, Fungsionalitas: berfungsi sepenuhnya, Connection rating 380V 4kW Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for power feed unit Safety covers for hand routers Spindle diameter 30 mm Aigner fence Extraction port 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Nwodpfjiinm Hex Ahwec Operating manual

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm Nwodpfx Ahewka S Ijwjc - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Nedpefxpbmefx Ahwowc

Kondisi: baru, Holzkraft minimax si 400es 32 panel saw 5504754 Heavy-duty professional model with scoring unit and anodized aluminum format sliding table. - Scoring unit equipped with its own drive motor and easily adjustable from outside - Smooth-running and precise anodized aluminum format sliding table with proven, permanently smooth-running ball contact system on hardened, wear-resistant rails (10-year warranty on rail wear) - Large support table extension (longitudinally adjustable) with material roller on telescopic arm - Extendable telescopic crosscut fence with two flip stops - Precise parallel fence, foldable for large panels, with quick clamping and integrated fine adjustment - Standard features include table extension, table lengthening, and eccentric clamp - Saw unit made from a robust cast iron ring with permanently precise dual pivot segment guides and zero-point tilt adjustment for smooth and perfect cuts (Holzkraft 6-year warranty on wear of swivel segments) - Large worktable made of stress-relieved cast iron - High intrinsic weight ensures precision and smooth operation - Equipped with a powerful three-phase motor - Version M: Motorized height adjustment and tilt of the saw unit, digital readout for tilting angle - Version A: Start/stop switch mounted on the sliding table - Version M A 3: Programmed control of saw blade height and tilt, programmed parallel fence positioning, infinitely variable fence movement via switch or automatic positioning system, position display via encoder, adjustment via ball-screw drive, incremental adjustment possible - Version UP: Swiveling control panel at eye level - Made in Italy TECHNICAL DATA: Dimensions and Weights Net weight approx. 715 kg Dust extraction connection Dust port diameter 120 mm Saw blade guard dust port diameter 80 mm Installation Information Transport width 990 mm Machine body length 1900 mm Machine body width/depth 885 mm Required installation length 7180 mm Required installation width/depth 4860 mm Note: The required installation dimensions consider maximum travel or usable lengths. Working area length 1600 mm Working area width/depth 2300 mm Note: Add the working area dimensions to the required installation dimensions to determine the recommended free space for installing the machine. Electrical Data Supply voltage 400 V Mains frequency 50 Hz Scoring motor power 0.55 kW Main drive motor power 7.0 kW Main drive motor duty cycle S6 Main drive motor duty cycle 40% Sliding Table and Table Sliding table length 3200 mm Sliding table width 360 mm Sliding table height 142 mm Table length 940 mm Table width 560 mm Table height 900 mm Saw Unit Cutting width with parallel fence 1270 mm Maximum crosscut width left of saw blade 3260 mm Edging length 3200 mm Nodpfx Ahskkrm Rjwswc Saw blade tilt 90 – 45° Maximum cutting height at 90° 136.5 mm Maximum cutting height at 45° 97 mm Note: Max. cutting height is independent of scoring blade. Saw blade diameter 400 mm Note: Saw blade diameter is independent of scoring blade. Saw blade speed 4000 rpm Scoring Unit Scoring blade diameter 120 mm Scoring blade speed 9200 rpm Holzkraft authorized dealer – accessories available on request!

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm Njdpfx Asg A D Anshwswc