Pers perakitan kaca

FOM S5000

Kondisi: baik (bekas), Tahun pembuatan: 1973, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers - Feed chute: covered - Pressing operation: hydraulic - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm Dodpfsb A Ii Sox Abhokh - Side screw ratchets for skip containers - Function tested

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Dsdpfxsgwbbqj Abhjkh Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), Mesin Gergaji Panel STRIEBIG COMPACT TRK 5207 C - bekas - Rangka dilas dengan kekakuan yang sangat tinggi, rel geser otomatis yang dapat menghindar, penguncian stabil pada gerobak gergaji di posisi atas dan bawah, panel kontrol pada ketinggian mata ----- Data Teknis ----- Panjang pemotongan: 4.600 mm, Tinggi pemotongan: 2.070 mm, Kedalaman pemotongan: 60 mm, Diameter mata gergaji: 250 mm, Motor: 3 kW, diameter konektor ekstraksi: 100 mm, Kebutuhan ruang (PxLxT): 5.716 x 1.500 x 2.814 mm, Dkedpfx Ajwyap Eobhsh Berat: 850 kg Info Kualitas: - Rel lipat telah diperbarui - Bilah penyangga telah diperbarui / diperbaiki - Inspeksi dasar lengkap - Pembersihan dasar menyeluruh - Sistem kelistrikan diperiksa - Siap untuk langsung digunakan

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Dkedjx Diqwepfx Abhjh Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BO8xx, DEMAG KBK crane ceiling crane runway with dimensions approx. 6x5m (5m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 KG - 0.5t Technical data of the system: Runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, etc. Crane equipped with internal power supply Including 500KG Demag chain hoist - lifting height approx. 3.5m - with trolley raised Crane is dismantled and immediately available Used condition, see pictures Location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available. Load capacity: 125KG - 1600KG Dkedpfx Abjupvyvjheh Please feel free to inquire about your crane runway with your required load capacity and dimensions.

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Dodpfx Asifnxxobhjkh Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Tahun pembuatan: 2010, Kondisi: bekas, 3-axis machining center with automatic tool changer for aluminum or PVC profiles Djdpfx Aewwukxobhskh Max. X-axis travel: 6,700 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Control: Windows 10 with new PC in 2023 Spindle speed infinitely variable up to 24,000 rpm Handheld control unit Minimum quantity lubrication system Tool changer with 2 magazines (total of 10 tool positions plus angle head) Clamp detection and clamp shifting 2 pneumatically folding material stops and 2 light barrier areas enable pendulum operation A total of 8 material clamps Spindle in very good condition, spindle draw-in force: 12.5 kN Safety fence dismantled, demonstration possible by arrangement Weight: approx. 3,500 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 7.000 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 200 mm, kecepatan spindel (maks.): 18.000 rpm, Perlengkapan: dokumentasi / manual, CNC machining and cutting center for aluminum profiles Djdpfxev Ucbns Abhekh

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BO844, DEMAG KBK overhead crane system with runway, approx. dimensions 8x5.5m (5.5m bridge) Multiple units of this crane are available! Load capacity / lifting capacity: 500 KG - 0.5t Dedpjupvycjfx Abhokh Technical specifications of the system: Runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Crane is equipped with internal power supply Including 500KG Demag chain hoist – lifting height approx. 4m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125KG to 1600KG Please inquire about your runway with the required load capacity and dimensions without obligation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles Dkedpfxex Aqi Eo Abhjh (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)