Mesin pengikat tepi dua sisi

HOMAG PROFI KF 20/09/QA/10

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, translation_001 Gedpfoiyx Ixox Alcoub

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Gsdpfx Aol Txw Helceub Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: sangat baik (bekas), Portal machine Guodpfegwbbqsx Alceb Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, panjang total: 7.920 mm, masa garansi: 3 bulan, HOLZ-HER edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Switching PUR glue and cleaning the system is quick and easy within a few minutes. Axis adjustment via ultra-precise, high quality servomotors. Gsdpfxsx Emf Do Alceub Special features for materials with protective foils, such as high gloss and super matt surfaces! One of the machine's absolute highlights is the multifunction package, which shows its strengths in workshops processing many different types of edges. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on application — from the longitudinal milling unit to corner copying up to the profile scraper. The extendable workpiece support and extended feed-in area assist with large workpieces, while a guide device helps to feed smaller parts into the machine. Edge thickness, rolls: 0.4 – 3 mm (material dependent) Edge thickness, strips: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet in EVA and PUR quality, with minimal effort. Processes all common edge types up to high gloss & super matt, as well as solid wood edges up to 15 mm. iTronic — pressure and adhesive quantity control Prepared for integration with RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid setting of radius, flush, and chamfer Spraying devices vertical & horizontal and much more. Delivery, installation, and operator training can be arranged by us for an additional charge. The machine is currently in our dispatch warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall apply. Our General Terms & Conditions can be found on our website at holzher.de/de/agb.

Kondisi: baik (bekas), Tahun pembuatan: 1973, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers - Feed chute: covered - Pressing operation: hydraulic Godpfjb A Ii Sox Alcjub - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for skip containers - Function tested

Kondisi: baru, Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Gedpji Hplkefx Alceub Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Godpfxed Nt Rqj Alcoub Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Perlengkapan Tambahan Unit aplikasi dengan lapisan Teflon untuk 1,5 kg granulat EVA Unit pemoles atas dan bawah FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander ini diproduksi pada tahun 2024. Mesin ini dilengkapi dengan majalah berputar berdiameter 750 mm untuk material edging dengan rentang 0,4-3 mm, unit aplikasi GlueBox, serta unit pemoles atas dan bawah. Mesin ini memiliki kontrol x-motion Plus canggih dengan layar sentuh 15'' SmartTouch dan unit milling multifungsi untuk pemrosesan tepi plastik yang presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Gujdpsx D Hbtsfx Alcob Perekat Tepi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) Gsdpfx Aljx D H Hcjceub • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space Gedpfx Aljdh Tfgscjub