Mesin Bor Jalur - C 800 / BST 800

WEEKE (HOMAG GROUP) DRILLTEQ C-800 (Profi BST 800)

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Hnsdpfxeff R Tqe Ag Rsi Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Hsdjwb Alljpfx Ag Rsni Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Numerical Control Smart Touch with Sintra HD Software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height adjustable electronically via CNC Motorized panel feed guide, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors, equipped with dynamic extraction system following the blade movement Flush trimming/chamfering unit with staggered 2 motors, electronically adjustable via CNC Non-stick unit Corner rounding unit with 2 multifunction motors (chamfering + corner rounding) Hnjdpowlbxlsfx Ag Rei Electronic edge scraper unit, electronically adjustable via CNC Glue scraper unit Brush unit "SP-501" Automatic return system with bridge discharge Winner 4A

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Nanxing NCG3021L(LL) este un centru de prelucrare CNC pentru nesting de înaltă performanță, proiectat pentru debitare, găurire, frezare și etichetare a pieselor într-un flux de lucru complet automatizat. Acest model integrează sisteme automate de încărcare, descărcare și etichetare, combinând automatizarea, inteligenta și producția digitalizată. Portul deschis permite conectarea cu software-ul de proiectare mobilier și ERP, facilitând procesarea panourilor în mod optimizat. Software-ul profesional de optimizare FCC crește eficiența tăierii, reduce risipa și sprijină managementul producției fără întreruperi. Mașina reprezintă soluția ideală pentru producția inteligentă de mobilier, reducând costul forței de muncă fără a afecta precizia sau productivitatea. Caracteristici principale • Sistem automat de încărcare și descărcare cu masă de ridicare 3 tone, dispozitiv de pre-împingere și cortină de siguranță • Sistem rotativ de etichetare cu imprimantă Honeywell – etichetarea și prelucrarea se desfășoară simultan • Masă de lucru cu vacuum (3100×2150 mm), împărțită în 10 zone pentru o prindere puternică și uniformă • Două pompe de vacuum puternice (2×7,5 kW, răcite cu ulei) pentru aspirație maximă și zgomot redus • Cadru portal cu rigiditate mare – asigură precizie și stabilitate pe termen lung, chiar și la viteze înalte • Electromandrină principală italiană 12 kW (HSK-63F, ATC, 24.000 rpm) cu suflare internă și externă pentru o îndepărtare perfectă a prafului • Schimbător automat de scule cu 12 poziții (ATC) – economisește timp, potrivit pentru operații complexe • Grup de găurire cu 21 de axuri pentru operații verticale și orizontale • Sistem de ungere automată pentru mentenanță redusă și durată de viață extinsă • Sistem de exhaustare cu puncte de aspirație față-spate pentru un mediu de lucru mai curat • Construcție axată pe siguranță: gard de protecție complet și sistem opțional de bariere optice Hnjdpfx Agjxcwnbs Rei • Sistem de control CNC SYNTEC cu interfață intuitivă, compatibil cu fișiere MPR, DXF, TCN, NC Specificații tehnice • Suprafața de lucru: X: 3100 mm / Y: 2150 mm / Z: 50 mm • Înălțime masă: 1010 mm • Viteză maximă de deplasare: X/Y 70 m/min, Z 20 m/min • Electrospindlă: 12 kW, HSK-63F, 24.000 rpm • Schimbător scule: ATC servo-controlat cu 12 poziții • Grup găurire: 21 axuri verticale, 2,5 kW, 4000 rpm, max. diametru găurire 35 mm • Capacitate pompe vacuum: 2×7,5 kW, 250 m³/h • Putere instalată: 47 kW • Dimensiuni mașină: 13.800 × 3.950 × 2.600 mm • Greutate: 6.000 kg • Alimentare: 380V / 50Hz / 3 faze Aplicații • Producție mobilier în panouri (bucătării, dressinguri, mobilier birou) • Debitare și găurire nesting MDF, PAL, placaj • Linii automatizate cu etichetare pentru fabrici smart Industry 4.0 Avantaje • Soluție all-in-one: încărcare, nesting, găurire, frezare, etichetare, descărcare – complet automatizate • Eficiență ridicată: software optimizat + sincronizare cu două portale pentru viteză dublă de procesare • Reducere a forței de muncă: necesită intervenție minimă din partea operatorului • Ideal pentru producția de serie: stabilitate, precizie și calitate constantă

Kondisi: sangat baik (bekas), Horizontal panel dividing saw with rear lift table Control: MCS Evolution Software included Powered roller conveyors (approx. 4500 x 2200 mm) Lift table (4300 x 2200 mm) Panel rotation device (for 90° rotation) No. 2 rear pushers (1 with clamping grippers) Program pusher division No. 10 clamping grippers Max. cutting width (mm): 4300 Useful stroke of pusher (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening width (mm): 133 Hnedpoq Rfahofx Ag Rei Scoring saw (max. blade diameter) mm: 20 Main saw (max. blade diameter / power) mm: 460 - kW: 27 Adjustable saw carriage feed rate (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): approx. 36

Kondisi: baik (bekas), Tahun pembuatan: 1973, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers Hsdpfsb A Ii Sex Ag Roni - Feed chute: covered - Pressing operation: hydraulic - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for skip containers - Function tested

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER) Hnjdpfjgwbbqjx Ag Rsi

Kondisi: bekas, Tahun pembuatan: 2020, tinggi total: 2.100 mm, panjang total: 2.000 mm, lebar total: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - └ Type of documentation: Operating system manual, technical data, user manual, electrical wiring diagrams - CE marking present: Yes - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [units]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [units]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [units]: 10 - Vertical drilling unit: Yes - Software: Biesse Works - Saw unit available: Yes - Safety device: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 - Fuse [A]: 32 Hodpox Ad R Njfx Ag Rsni - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Transport packages [units]: 2 Financial Information VAT: The stated price is plus VAT VAT / margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Tahun pembuatan: 2026, Kondisi: baru, Fully Automatic Orbital Stretch Wrapper Packaging Machine SPINNER 1500s + BN Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in the running direction General Technical Data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feed - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic hold-down devices (front and rear) pressing from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touch screen for adjusting machine parameters to suit product requirements - Operator safety systems Optional Equipment: - Various types of conveyors Hjdjfuwrcopfx Ag Rjni - Roller infeed and outfeed tables - Air bubble film unit (included in this offer) Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. length (W x H x L): 100 x 18 x 550 mm Conveyor Belt Specifications: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Load capacity: 150 kg/m Stretch Film Specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron Air Bubble Film Unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20–76 mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & sealing system: operating temperature: 50°C–150°C

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, wemhoener-basic-1000-plus-en Hedpexbcudofx Ag Reni