FPT DINOMAX

FPT Industrie DINOMAX

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. Blodpfx Aezb Evljfpsl EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Deskripsi dapat dilihat pada lembar data terlampir. Bljdpfszqcvyjx Afpjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, panjang meja: 4.500 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 22.000 rpm, CNC Heidenhain iTNC 640 WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 t/m2 T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed at 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for undercuts up to 10°. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK-A63 DIN 69893 HSK-A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM: Available spindle power (S1/S6): 37/43 kW Available spindle torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK-A100 DIN 69893 55-STATION CHAIN TOOL MAGAZINE, HSK-A100 / HSK-A63: Fixed floor-mounted chain magazine located at the rear of the machine, cased for operator protection, with vertical tool change arm and automatic tool preparation. “Fixed position” management. Hydraulic axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Number of tools: 30 Max tool diameter: 90 mm Bedpeyv In Iefx Afpoll Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 300 mm Max tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Number of tools: 25 Max tool diameter: 100 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 450 mm Max tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine is equipped with: - Heidenhain HR550 remote electronic handwheel - High-pressure coolant and air through the spindle - Semi-automatic change of electrospindle, with HSK-A63 and HSK-A100 interface - Various tooling included with the machine - Renishaw probe - BLUM laser presetter - AUTOCAL automatic head calibration system - Visormax subscription for remote monitoring - Electrical cabinet air conditioning - Cooling system for all axes and the electrospindle - User and maintenance manual and CE certificate of conformity

Kondisi: bekas, Tahun pembuatan: 2004, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.400 mm, CNC HEIDENHAIN iTNC 530 PERGERAKAN SUMBU X 6000 MM PERGERAKAN SUMBU Y 1400 MM PERGERAKAN SUMBU Z (VERTIKAL) 2500 MM SPINDEL MOUNTING ISO 50 DIN 69871-B50 PUTARAN SPINDEL 5000 RPM DAYA MOTOR S1 37 KW - S6 56 KW KEPALA OTOMATIS INDEXASI 1° X 2,5° PENUKAR ALAT 40 SLOT PENDINGIN INTERNAL DAN EKSTERNAL PEGELUAR SERPIHAN MEJA PENJANGKARAN 8000 X 2000 MM Bledpfjxhqivsx Afpol PELINDUNG PERIMETER

Kondisi: bekas, Tahun pembuatan: 2007, Rentang pergerakan sumbu-X: 3.600 mm Rentang pergerakan sumbu-Y: 920 mm Rentang pergerakan sumbu-Z: 820 mm Sistem kontrol: iTNC530 Heidenhain Sumbu B: +/- 90 x 1° Sumbu C: 360 x 0,001° Kecepatan umpan sumbu X/Y/Z: 1 - 20.000 mm/menit Kecepatan umpan cepat sumbu X: 100 m/menit Kecepatan umpan cepat sumbu Y: 60 m/menit Kecepatan umpan cepat sumbu Z: 60 m/menit Kecepatan spindel - variabel: 20 - 10.000 RPM Pemasangan perkakas: SK50 Daya penggerak 100% ED: 32,00 kW Daya penggerak 40% ED: 48,00 kW Torsi pada 40% / 100% ED: 294 / 196 kW Luas permukaan meja: 4.200 x 900 mm Jumlah alur-T: 9 Jarak antar alur-T: 100 mm Ukuran alur-T: 1x 18H7 / 8x 18H12 Bjdoy Sbikspfx Afpoll Kapasitas beban meja - tengah/maksimal: 4.200 kg Majalah perkakas: 80 Diameter perkakas: 115 mm Diameter perkakas pada 2 ruang kosong: 160 mm Panjang perkakas - maks.: 360 mm Berat perkakas - maks.: 12,00 kg Total kebutuhan daya: 85,00 kW Berat mesin: sekitar 32,00 ton Kebutuhan ruang: sekitar 11,50 x 6,60 x H3,30 m Pusat pemesinan vertikal dengan sistem kontrol HEIDENHAIN iTNC530, kepala frais putar, dinding pembatas, rak perkakas dengan 80 tempat, konveyor serpihan, sistem pendingin, meja tambahan NC Ø700mm, mode operasi 4.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 720 mm, model controller: Mazatrol SmoothG, lebar meja: 820 mm, panjang meja: 3.500 mm, berat keseluruhan: 16.500 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 3.679 h, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 48, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: konveyor serpihan, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of Manufacture 2018 / Commissioned 2019) The machine can be inspected under power at our facility. Upon request, we will gladly send you demonstration videos of the machine. The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is particularly suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, accommodates large-sized workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of approximately 22 kW, ensures high material removal rates and precision. The CAT 40 (ISO 40) spindle taper provides wide tool compatibility. Bledey S Db Aopfx Afpsl The machine is equipped with the modern MAZATROL SmoothG CNC control, offering intuitive operation, rapid programming, and high process security. The 48-position tool changer enables flexible and efficient machining even for complex production tasks. For optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and an automatic lubrication system. With a machine weight of approx. 16,500 kg, the VTC-820/30 offers high stability and effective vibration damping, which has a positive effect on surface finish and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability for industrial manufacturing. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Perlengkapan: Penandaan CE, alat penukar nosel, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Hochfeste Schweißbettkonstruktion Segmentierte Rauchabsaugung Vollautomatische Buttereinspritzanlage Vollautomatisches Schneiden, materialschonend, hohe Geschwindigkeit Schnittbereich 4000 × 2000 mm X-Achse Verfahrweg 1520 mm Y-Achse Verfahrweg 4020 mm Z-Achse Verfahrweg 80 mm Max. kombinierte Positioniergeschwindigkeit 170 m/min Beschleunigung 2,8 G Blodpfow A Iiljx Afpel Maschinenabmessungen (L×B×H) 9500 × 2900 × 2380 mm Stellfläche 10500 × 3400 mm Eigengewicht 8500 kg

Kondisi: sangat baik (bekas), MECOF AGILE CS 500 TNC 640 boring mill in technically flawless condition Technical data: - Spindle mount: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 mm + (2 CUBI 1520×1000 mm) - Spindle speed: 4000 rpm - CNC model: fidia CXR Bjdpey Rzklefx Afpjll - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet diverse requirements. With a 6000 mm longitudinal travel and a 1250 mm cross travel, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining workpieces at various angles. The table size is 7300×1090 mm, supplemented by two additional Cubi measuring 1520×1000 mm. In this particular instance, the machine was installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor, delivering a maximum spindle speed of 4000 rpm. The fidia CXR CNC control guarantees precise programming and user-friendly operation. The 10-position tool changer (5 ISO 50 – 5 HSK 50 E) enables rapid tool changes to optimize the production process. The machine has been regularly serviced and is in technically flawless condition. It can be inspected under power and during ongoing production. Extensive accessories included. Additional photos available. Dismantling, removal, shipping and reinstallation can be organized upon request.

Kondisi: bekas, Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, kecepatan rotasi (maks.): 5.000 rpm, SPINDLE INTERFACE ISO 50 X-AXIS TRAVEL: 6000 MM Z-AXIS SLIDE TRAVEL: 1250 MM Y-AXIS VERTICAL TRAVEL: 2000 MM SPINDLE SPEED: 5000 RPM FEED RATE: 8000 MM/MIN SPINDLE MOTOR POWER: 37 KW CNC: HEIDENHAIN iTNC 530 REMOTE CONTROL PANEL STOLLE TABLE: 7000x2000 MM, LOAD CAPACITY 15 TON/M² RAISED TABLE: 1080 X 7220 X H 820 MM TOOL CHANGER WITH 40 POSITIONS CHIP CONVEYOR CONTINUOUSLY POSITIONING HEAD TUPC 0.001°x0.001° INTERNAL SPINDLE COOLANT 20 BAR RTCP FPT AUTOCAL FUNCTION EXTERNAL HIGH AND LOW PRESSURE COOLANT TANK WITH PAPER FILTER NO.2 AUTOMATIC HORIZONTAL DIVIDERS WITH NO.2 SUPPORT TABLES Bsdpfx Afjwz H Rfjpell NO.1 PART PROBE

Kondisi: bekas, Tahun pembuatan: 2013, x-perjalanan 735 mm y-perjalanan 650 mm z-perjalanan 560 mm Kontrol 840D sl FD operate Siemens Kisaran putaran - Spindel utama maks. 18.000 rpm Daya penggerak - Spindel utama 35 / 24 kW Torsi maksimum 119 Nm Tipe koneksi alat HSK-A63 DIN 69893 Diameter meja 680 mm Beban meja maksimum 600 kg Dimensi benda kerja maksimum 650 x 650 x 500 mm dapat dimiringkan +/- 120° dapat diputar 360° Jumlah tempat alat 30 pos. Blodszipzyepfx Afpsl Tipe koneksi alat HSK-A63 Diameter alat maksimum 80 mm Diameter alat maksimum jika posisi tetangga kosong 160 mm Panjang alat maksimum 315 mm Berat alat maksimum 8,0 kg Waktu pergantian alat (span-to-span) sekitar 4,9 detik Kecepatan gerak makan maksimum 40.000 mm/menit Kecepatan pergerakan cepat 40 m/menit Kebutuhan daya total 65 kVA Berat mesin sekitar 11,6 t Kebutuhan ruang sekitar 4,0 x 3,0 x 2,95 m Pusat pemesinan CNC Universal 5 sumbu DMG - DMU 65 FD monoBLOCK - Meja putar miring - tanpa alat - Hanya 8.444 jam operasi - Hanya 2.246 jam spindel - Pendinginan dengan aliran udara melalui tengah spindel - Paket Deckel Maho MDynamics - Paket keselamatan untuk pemadaman listrik - Nozzle pendingin tengah: 7 nozzle udara, 13 nozzle air - Paket tropis (35° - 50° Celsius) - Unit pendingin (ICS) dua tingkat, 40 dan 80 bar - Penggunaan alat khusus 18kg / 370mm