Mesin frais kolom bergerak

FPT Industrie VERUS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 2.000 mm, gerak cepat sumbu X: 35 m/menit, kecepatan spindel (maks.): 5.000 rpm, lebar meja: 2.000 mm, beban meja: 15.000 kg, panjang meja: 2.000 mm, 1 Lasdpfx Aeyugbijfioa

Kondisi: bekas, Tahun pembuatan: 2014, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2014 Lasdpfx Aoygipaofisa Travel distances: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: qty: 7 Size of T-slots: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. load capacity: kg 11,000 Paint finish: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Max. torque: Nm 935 Speed control: 3-stage (oil-cooled), with automatic switching Feeds: X, Y, and Z axis: mm/min 2 – 15,000 Max. rapid traverse: X, Y, and Z axis: mm/min 25,000 Max. feed force: X, Y, and Z axis: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor + 1,280mm) Height approx. (for Z= 1500mm): mm 3,800 Width approx. (for Y= 1200mm): mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & internal coolant supply (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and undergo a comprehensive inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are repaired professionally by our expert service team.

Kondisi: bekas, Tahun pembuatan: 2017, de2tech481 Lsdpfx Aoycln Defijaa

Kondisi: baik (bekas), Tahun pembuatan: 2016, Diameter pembubutan 300mm, panjang pembubutan 510mm, sumbu Y +/- 52,5mm, ayunan 600mm, kapasitas batang 65mm, kecepatan spindle 4.500rpm, turret 16 stasiun, motor spindle 15kW, milling 6.000rpm, sumbu C 0,001 derajat, kecepatan sub-spindle 6.000rpm, sumbu Y +/- 52,5mm, kontrol Doosan FANUC-i, tailstock, pendingin, pengukur alat, penangkap bagian, chuck 3 rahang, lampu tegangan rendah. Ljdpjx Elr Aofx Afioaa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 900 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, lebar meja: 1.100 mm, panjang meja: 3.200 mm, jumlah slot dalam magazin alat: 60, DMG MORI DMF 260/11 LINEAR 5 AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS (MACHINE IN GOOD CONDITION) Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC: Heidenhain iTNC 530 Table size: 3200 x 1100 mm Travel X / Y / Z: 2600 X 1100 X 900 mm Table load capacity: 4,000 kg Rotary table capacity: 1,200 kg Machine weight: 27,750 kg (27.5 t) Spindle taper: DIN 2080 A-50 (ISO 50) Tool magazine capacity: 60 positions Spindle speed: 10,000 rpm Blum tool measurement system Additional Equipment and Performed Maintenance - Internal and external air and coolant supply through spindle via M function (40/80 bar) - Upper external air cooling (chip removal for higher volume via M function) - Head vibration control module - Preventive maintenance up to date: oils, filters, coolant changed according to manufacturer's guidelines or as needed - Y-axis spindle replaced at 9,256 operating hours - Belleville washers replaced at 13,903 operating hours - Mechanical tool probe with possibility to install Blum laser (includes laser) - DMG probe - 3D QuickSET - Coolant gun - Linear drive on X axis - Basic machine dimensions: Length mm: 8,600 Width mm: 5,800 Height mm: 3,200 Ljdpfxsytrzxo Afisaa - Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukur TS 460. Dimensi meja kerja adalah 1600 mm x 750 mm dengan kecepatan spindle maksimum 12.000 rpm. Dengan ukuran 5000 × 4050 × 3235 mm dan berat 13.500 kg, jangan lewatkan kesempatan untuk memiliki pusat pemesinan vertikal DOOSAN MYNX 7500 ini. Hubungi kami untuk informasi lebih lanjut. • Panjang meja: 1600 mm • Lebar meja: 750 mm • Taper spindle: ISO 40 double contact • Kecepatan maksimum spindle: 12.000 rpm Lodpfxox U Dtwo Afieaa Dimensi Kedalaman mesin: 4050 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 12.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse rates of 50 m/min in all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 tools and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to acquire the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table surface: 140 mm • Max. distance spindle nose to table surface: 860 mm • Working spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: 40° steep taper • With neighboring pockets occupied: 80 mm • With neighboring pockets empty: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Operating requirements • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air consumption: 260 l/min • Tank capacity: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mount for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Rotary axis drive motor Ljdpfx Ajx Nkp Ujfioaa • Cylinder for swivel unit

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request. Lajdpoxwdygsfx Afioa

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: STYLE CNC Machines, jumlah slot dalam magazin alat: 24, produsen motor: FANUC, Pengiriman setelah konsultasi Ref: 24F048 Tahun pembuatan: 2025 Kondisi: Showroom Laodjw Ty S Sepfx Afiea Spesifikasi: - Sumbu X: 4000 mm - Sumbu Y: 1000 mm - Sumbu Z: 1000 mm - Motor utama 26 kW (S6) - 8000 rpm - BT-40 - Penukar alat otomatis (24 posisi) - Layanan jarak jauh (IXON) + koneksi jaringan - Pompa pendingin lebih kuat incl. semprotan - Ditingkatkan ke perangkat lunak STYLE terbaru yang tersedia

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, panjang meja: 4.000 mm, lebar meja: 1.500 mm, kapasitas tangki: 500 l, SHW PowerSpeed 5 Travel Paths • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rate • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range: 360 x 1 degree • Milling head tilting range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Table • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Lasdpfxjw I Rz He Afiea Splash and Chip Guard • 1-sided, with 2 sliding doors, manually operable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine refurbishments, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhaul - CNC control retrofit ----- _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - cnc milling machines - milling machine - large component machining - large part machining - large part machining - cnc large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine