Mesin penggilingan alat universal

FR. KORRADI UW 002

Kondisi: sangat baik (bekas), Mesin Frais Universal Schaublin 53N Produsen: Schaublin Tipe: 53 N Ukuran meja: 1100 x 255 mm Alur T: 4 Lebar alur T: 14 mm Jarak antar alur T: 50 mm Perjalanan longitudinal: 700 mm Perjalanan longitudinal untuk frais spiral: 550 mm Ljdpfx Alsyxgyhe Njhi Perjalanan vertikal: 430 mm Perjalanan melintang: 250 mm Feed longitudinal/melintang: 12 hingga 1000 mm/menit Feed vertikal: 6 hingga 500 mm/menit Gerak cepat longitudinal/melintang: 3500 mm/menit Gerak cepat vertikal: 1750 mm/menit Putaran spindle: 18 tingkat, 38 hingga 1500 rpm Kepala spindle: VSM 33831 ukuran 44 Kepala collet: P25 Daya penggerak utama: 4 HP Putaran penggerak utama: 1425 rpm Berat mesin: 1650 kg Kebutuhan ruang: 226 x 172 x 165 cm Kami tidak bertanggung jawab atas kebenaran, kelengkapan, dan ketepatan data yang tertera.

Tahun pembuatan: 1967, Kondisi: baik (bekas), nomor mesin/kendaraan: 7011/C, Table clamping surface: 310 x 1400 mm Table travel x-axis: approx. 950 mm Table travel y-axis: 325/345 mm Table travel z-axis: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinal & cross: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min Electrical connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Lhjdpfxod Rxw Hs Al Nsi Weight: approx. 1500 kg

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Ljdpfx Aehmvawel Nohi

Kondisi: bekas, x-axis travel 800 mm y-axis travel 400 mm z-axis travel 300 mm Heidenhain digital readout Clamping surface of table 1000 x 520 mm Spindle speed range 40 to 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Required floor space approx. 1700 x 1600 x 1800 mm Deckel FP 2 B - Skew bed in travelling column design Ledpfjqpl Uusx Al Nehi Universal swivel/tilt table including various SK40 holders, draw-in thread S20x2 Collet chuck holder Machine was overhauled at a cost of approx. €24,000.00

Kondisi: sangat baik (bekas), Mesin las titik dengan silinder stroke tunggal dan pemegang elektroda flensa atas dan bawah Merek: DALEX Tipe: PMS 14-3 Jarak pengelasan: 350 mm Daya nominal pada 50% ED: 80 kVA Arus hubung singkat sekunder: 54,5 kA Lhedpfxjtuwz Is Al Nji Tegangan tanpa beban sekunder: 7-14 V Gaya elektroda: 80-1.200 daN dilengkapi dengan: Sakelar 8 langkah Sakelar utama Lemari kontrol tambahan HARMS+WENDE Kontrol pengelasan sinkron MPS 200 8 program pengelasan Plat tipe AEG Mulai dengan pedal kaki

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), Macmon M 100 D universal milling machine with 3-axis Fagor digital readout, previously used in a training workshop. Features include a fixed table and SK 40 spindle taper. Accessories: various collets and milling arbors. Machine is in very good, ready-to-operate condition and can be demonstrated under power by appointment. Lhodpfx Alehtfubo Nei

Kondisi: bekas, Tahun pembuatan: 1976, Travel (X/Y/Z): 350 / 150 / 340 mm Table clamping surface: 600 x 210 mm Spindle taper: SK 40 Lhjdpfxowwwr Ej Al Noi Spindle speeds: 40 - 2000 rpm Feeds: 5 - 500 mm/min Rapid traverse: 1.2 m/min Total power requirement: 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: Fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Kondisi: bekas, x-travel: 600 mm y-travel: 400 mm z-travel: 640 mm Spindle speed: 30 - 1800 rpm Table size: 880 x 495 mm Total power requirement: 4 kW Machine weight approx.: 2 t Space requirements approx.: 2.2 x 1.8 x 2.1 m Lhsdpfxecxxx Tj Al Nji Equipped with machine lamp and lubrication system, swivelling vertical milling head +/- 90°, drip tray

Kondisi: bekas, en-1 Ledpfoifu Arex Al Njhi

Kondisi: bekas, Tahun pembuatan: 1970, Radial drilling capacity in steel (diameter): 32 mm Arm reach: 1000 mm Maximum workpiece height: 1400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. [missing value] WEBO Radial drilling machine Model: BR 32 V Year of manufacture: approx. 1970 Serial no. _____ Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Boring (with 50% pre-drilling): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 ranges/stepless: 60 - 1,850 rpm Lhjdpfxst H Smys Al Nei Base plate: 1,200 x 930 mm Installation height under the spindle: 200 - 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal movement of drilling saddle: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/revolution Spindle drive: approx. 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / special equipment: • Manual mechanical clamping of arm and spindle box via hand lever • Automatic feed with depth stop via vernier • Stepless speed control within three gearbox ranges and two motor speeds, adjustable via hand lever • Right and left hand rotation • Electro-motorized vertical adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table, approx. 800 x 600 x 600 mm (height), vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Older but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice