Pers tubuh

Gannomat / Ganner Concept 70 Eco

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 Laedpfew Td A Iox Adwsi - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, ketebalan tepi (maks.): 10 mm, berat keseluruhan: 1.980 kg, jenis penyesuaian ketinggian: listrik, Biesse Type Akron 440 Year of manufacture: 2007 Lsdpfx Aowahhpsdwsai Noise level according to manufacturer: 88 dB (A) Rated power: 13 kW Extraction capacity according to AUVA: 565 m³/h Technical specifications: - Edge thickness: 0.4 - 10 mm - Feed speed: 12 m/min - Max. edge banding height: 13 - 60 mm - Separating agent - Jointing unit - Edge magazine - Preparation for PUR adhesive - End trimming unit, tiltable 0-15° - Tiltable bevel/radius unit RS-501 - Contour milling - Radius scraper RBK 502 - Flat scraper RCC 701 - Buffing unit SP 501 - Electric height adjustment - Total connected load: 13 kW - Machine length: 4200 mm

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated Lajdpfx Ajiidm Nsdwsi - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), MEMBRANE PRESS For coating MDF-shaped panels with PVC, PP, and PET with VARIOPIN fully automatic substructure system Lsdpfxjrwxz Re Adwjai Automatic front loading/unloading and preparation table (double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working dimensions mm: 1250 (or 2 x 600) x 2550 Front loading side from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programmer) SIEMENS SIMATIC Panel Touch Installed total power approx. 50 KW OPTION "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WEMHÖNER VARIOPRESS Basic 1000 S Vacuum Membrane Press Technical Data: - Heating plate dimensions (mm): 2850 x 1550 - Electric heating plate configuration: Aluminum heating plate on top - Total pressing force (kN): 2400 - Maximum chamber pressure (bar): 6 - Maximum operating temperature: 180°C - Maximum batch or workpiece size (mm): approx. 2460 x 1180 - Thermoplastic film as roll material: film width approx. 1430 mm - Film thickness (mm): approx. 0.25 - 1 Laodev Np H Hepfx Adwei - Pressure chamber height (mm): up to max. 180 Connections: - Installed power (kW): approx. 46 - Required air pressure (bar): approx. 8

Kondisi: baik (bekas), Tahun pembuatan: 2014, Mesin press badan bekas - GANNOMAT Concept 70 Eco - Tahun pembuatan: 2014 - Tersedia Desember 2025 Lajdpfjxhc T Tjx Adwoi

Tahun pembuatan: 2001, Kondisi: bekas, • Size of heating plate (mm): approx. 1500 x 2700 Lodpfx Adjkt N Huewoai • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-28/2018, laju aliran nominal: 2.500 m³/jam, lebar total: 750 mm, panjang total: 2.000 mm, tinggi total: 1.980 mm, sambungan udara terkompresi: 6 batang, daya: 3 kW (4,08 hp), SPÄNEX dust extractor, type SMU 25 Connected load: 380V, 5.6A, 3kW Weight: approx. 400 kg mobile Extraction nozzle: 180 mm Nominal airflow: 2,500 m³/h Operating modes: manual / automatic Electro-pneumatic filter cleaning Pneumatic connection: 6 bar Laedpfxjtwp Nze Adwsi Dimensions (HxLxW): 1,980 x 2,000 x 750 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), Mesin penghancur Weima ECO 600 E, tahun pembuatan 10/2005 Motor listrik 18,5 kW Daya penggerak melalui sabuk V dan gearbox Bukaan pengumpan: 600 mm x 800 mm Volume hopper: 0,6 m³ Diameter rotor: 252 mm Panjang rotor: 600 mm Kecepatan rotor: 60 - 100 rpm Lubang saringan: 20 mm Alat: 14 pisau Diameter nozzle hisap: 160 mm Ljdpfjxf T Hrex Adwjai Berat: sekitar 1.300 kg

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, en Lasdpfx Adexbcudswji