Pers tubuh

Gannomat Concept Eco

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim Dedpfx Aow Nafkshasuw availability: short notice

Kondisi: baru, Tahun pembuatan: 2026, Penyusunan sistem penanganan korpus untuk pembuatan lini perakitan korpus manual, semi-otomatis, atau otomatis penuh selalu dilakukan sesuai dengan permintaan pelanggan. Kami dengan senang hati akan menjelaskan kepada Anda tentang lini perakitan korpus yang memudahkan pekerjaan Anda, mengurangi waktu pengaturan, serta meningkatkan kapasitas produksi dalam percakapan pribadi. Djdpfsdx R D Dex Ahasuw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Dsdeb Eln Depfx Ahasuw

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Dodpfx Ahey Egz Sjajuw Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearings: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Dusdpfxsn Nv H Se Ahajw Electrospindle inverter: yes Max electrospindle speed: 24,000 rpm (optionally 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved steel frame, precision machined Table type: vacuum, hybrid, steel, aluminum with M16 or M18 threaded holes #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; Dsdpjiidm Nofx Ahasuw - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Dsdpfsuf Hx Hex Ahaeuw

Kondisi: bekas, Abmessungen: L 6990 mm, B 2500 mm, H 2720 mm. Gewicht 4191 kg. Kippvorrichtung für 140–660-l-Behälter. Dodpsvkn Nvofx Ahasuw

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Gannomat Concept 70 Eco Carcase Press Year of Manufacture: 2025 including the following options: - Rapid traverse speed, adjustable movement speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections during carcase pressing, as well as for drawer manufacturing. Brief Overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless adjustment of pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and movement speeds: 5 / 10 / 25 mm/sec (with fine positioning / crawl mode) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: extremely simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: extremely simple operation via LCD display Universal Application Range: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with overhanging top panels • Drawers • Pressing of multiple carcases/drawers simultaneously Advantages: • Proven tolerance compensation system (GANNOMAT system) Dsdpjvxgrrefx Ahasuw • Electromechanical carcase press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to tried-and-tested, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Very simple operation thanks to a practical operating panel • Fast thanks to pressure beam positioning speeds of up to 50 mm/sec (option) • Efficient due to precise pressing of various carcase sizes • Flexible thanks to adjustable parameters such as pressing force, pressing time, and movement speeds • Precise thanks to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a state-of-the-art carcase press

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas Dsdpfxsxwaz Hs Ahasuw - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K