Pusat pembubutan dan milling CNC

Gildemeister Twin 65

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Axes: XYZCB (8 axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tooling system: VDI30/toothed profile, torque: 150Nm, spindle speed: 5,000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2,430mm/5,600mm/2,430mm, weight: approx. 13,000kg, operating hours: approx. 34,624h, spindle hours: approx. 22,797h. Dodetufbyspfx Abhoun

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Max. turning diameter: 658 mm Max. turning length: 1,519 mm Travels: X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis: -30 to 210° Rapid traverse (X/Y/Z/W): 50/40/50/30 m/min Main spindle: Drive power: 30 kW Max. spindle speed: 4,000 rpm C-axis Max. bar capacity: 80 mm Sub spindle: Dsdpoyam D Uofx Abhoun Drive power: 26 kW Max. spindle speed: 4,000 rpm C-axis Milling spindle: Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool stations Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment: Mayfran Consep 2000 II chip conveyor, double change filter Preparation for high-pressure coolant system (IKZ) 70 bar 70 bar high-pressure pump, 7 pressure stages Air blowing device on upper turret Interface for bar loader Automatic parts catcher (D:80 x L:150 x 5 kg) Gear hobbing Synchronized thread cutting with milling spindle Constant rapid traverse angle during movement Thread re-cutting function Turning/milling function under Mazatrol 5-axis machining package for SmoothX -EIA/ISO 5-axis simultaneous machining -F) Tool tip control for 5-axis simultaneous machining -Spline fine interpolation -5-axis spline interpolation Sub spindle with C-axis incl. synchronization C1+C2 Prepared for multiple and flash tool tool holders Dimensions / Weight: Dimensions (LxWxH): 4,910 x 2,800 x 2,720 mm Weight: 16,900 kg General machine options: B-axis 0.0001° Main spindle C-axis positioning accuracy 0.0001° Sub spindle positioning without C-axis positioning accuracy 0.001° Absolute positioning system (linear axes) Work area lighting Operator door with interlock switch CE conformity Double footswitches for main and sub spindle Separate controls for opening/closing the chucks Hydraulic pressure interlock Fully enclosed work area Automatic opening/closing of main and sub spindle chuck jaws Chuck status feedback for main and sub spindle Chuck status feedback via sensors Tooleye for upper and lower turret Lead error correction input X, Y, Z Standard tool set (lower turret)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jumlah sumbu: 2, Gildemeister MF twin 65 ini diproduksi pada tahun 1996. Mesin ini memiliki dua revolver dengan masing-masing 12 posisi alat, semua dapat digerakkan secara motorik, dan dilengkapi 14 alat penggerak serta 14 dudukan alat. Mesin ini memiliki kedua spindle dalam kondisi sangat baik dan diameter lubang batang 65 mm, dilengkapi dengan Cucchi Pietro bar feeder. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • 2 revolver (masing-masing 12 posisi alat), semua dengan penggerak motor • Diameter lubang batang: 65 mm • Kedua spindle dalam kondisi sangat baik • Pompa hidrolik/penggerak baru Dusdpfx Aeyaqr Ajbhen Perlengkapan tambahan • Cucchi Pietro bar feeder • 14 alat penggerak • 14 dudukan alat

Kondisi: bekas, Tahun pembuatan: 2007, produsen pengendali: Siemens, model controller: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Bar capacity: 65 mm Turning diameter: 250 mm Turning length: 650 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35 kW Max. torque: 370 Nm C-axis: 0.001° Bar capacity: 65 mm Chuck: Hainbuch Spanntop size 65 Clamping cylinder: Hollow clamping cylinder Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 26 kW Torque: 290 Nm C-axis: 0.001° Chuck: Hainbuch Spanntop size 65 Clamping cylinder: Semi-hollow clamping cylinder Z-axis: 670 mm X-axis: 175 mm Turret I (X/Y/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 300 mm Y-axis: 80 mm (+/- 40 mm) Z-axis: 650 mm Turret II (X/Z): Technology: Tool turret, 12 stations Dusdpfx Asyamflebhen Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 180 mm Z-axis: 650 mm Equipment / Accessories: Chip removal: Chip conveyor Coolant supply: High-pressure coolant system Position measuring systems: Direct measurement on all X-axes (glass scales) Bar feeder: IRCO Breuning Parts removal: Finished parts gripper + transfer belt Emulsion mist extractor: Mechanical Setup mode: Electronic handwheel

Kondisi: bekas, Tahun pembuatan: 2008, en Dsdpfx Aovvtpxebheun

Kondisi: baik (bekas), Tahun pembuatan: 2008, 1 used CNC turning and milling center Gildemeister Model TWIN 65 RG 2, year 2008 with Siemens 840 D Maximum turning length (Z-axis travel): 650 mm Maximum turning diameter over bed: 250 mm Maximum X-axis travel: 300 mm Maximum rapid traverse speed X-axis: 30 m/min Maximum rapid traverse speed Z-axis: 30 m/min Maximum main spindle power: 35 kW Spindle bore diameter: 65 mm Minimum main spindle speed: 20 rpm Maximum main spindle speed: 5000 rpm Machine length: 7000 mm Machine width: 4700 mm Machine height: 2500 mm Machine weight: 10 t Equipment • Y axis • Irco bar feeder ILS RBK 1200 mm • Workpiece removal device Technical data subject to change and errors excepted. Please note: The machine is sold without chuck, as the chuck will remain with the previous owner! Duedoq T I Izepfx Abhen

Kondisi: bekas, Tahun pembuatan: 2006, Panjang putar: 900 mm Jarak antara spindle: 580 mm Diameter putar maksimum: 250 mm Putaran spindle utama: 30-6000 rpm Putaran sub spindle: 30-6000 rpm Putaran alat putar: 2000 rpm Lubang spindle: 65 mm Ø Sumbu Y: 670 mm Menara atas dengan 12 stasiun Menara bawah dengan 12 stasiun Alat putar di semua stasiun (pada kedua menara) Tailstock terkontrol Perangkat pengambil benda kerja Kontrol: Siemens Sinumerik 840 D Dilengkapi dengan: Chuck collet Hainbuch di kedua spindle 2 buah chuck sentrifugal Konveyor serpihan Barfeeder Irco Profimat Duedpox N A Hlefx Abhjn

Tahun pembuatan: 2008, Kondisi: diremajakan ulang (bekas), Schwingender Grundkörper: 800 mm Schwingender Querschlitten: 800 mm Maximaler Abstand zwischen den großen Spindelnasen: 1.130 mm Maximaler Bearbeitungsdurchmesser: 320 mm Maximale Drehlänge: 810 mm Stangendurchlass: 52 mm X1-, X2-Achse: 210 mm Y1-Achse: 110 mm (+65, -45) Y2-Achse: 110 mm (+45, -65) Z1-, Z2-Achse: 810 mm B-Achse (Spindel 2): 920 mm CNC-Steuerung: MSX-701 III Spindel 1, 2 Max. Spindeldrehzahl 1, 2: 6.000 1/min Duodpsxuguujfx Abhjn Spindelnase 1, 2: JIS A2-5 Spindelbohrungsdurchmesser 1, 2: 61 mm Revolverkopf: 16 Stationen x 2 Max. Werkzeugspindeldrehzahl, motorisiert: 6.000 1/min Vorschubgeschwindigkeit x1, x2: 30.000 mm/min Vorschubgeschwindigkeit y1: 20.000 mm/min Vorschubgeschwindigkeit z1, z2: 50.000 mm/min

Kondisi: bekas, Tahun pembuatan: 2005, Panjang pembubutan 900 mm Jarak antara spindel 580 mm Diameter pembubutan maksimum 250 mm Putaran spindel utama 5000 rpm Putaran sub spindel 5000 rpm Putaran alat berputar 2000 rpm Lubang spindel 65 mm Ø Sumbu Y 670 mm Menara atas dengan 12 posisi Menara bawah dengan 12 posisi Dujdpfjx N A Ntsx Abhen Alat berputar di semua posisi (pada kedua menara) Pinol terkontrol Perangkat pengeluaran benda kerja Kontrol: Siemens Sinumerik 840 D Dilengkapi dengan: Sistem collet Hainbuch pada kedua spindel Konveyor serbuk Irco Profimat loader batang

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Siemens Sinumerik 840D control system Duodpfxswh U D He Abhsn Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Belt filter system Chip conveyor IRCO Profimat bar loader

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 5.991 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with Siemens control. The machine is in good, well-maintained condition and has been in operation until recently. A demonstration under power can be arranged by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table and is ideally suited for precise 5-axis complete machining of complex workpieces. Typical areas of application include tool and mold making, the production of precision parts, as well as prototypes and small to medium series. Technical Data (excerpt): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of manufacture: Germany Worktable Simultaneous swivel rotary table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 stations SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Cooling media / Chip disposal Coolant-air blow-over switching Rinse gun for chip washing SIEMENS control options Electronic handwheel General options Operating mode 4 Second cabin door Special designs Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Dujdpfjx S D N Tox Abhon Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, additional accessories by arrangement. Other information: Location: Birkenfeld (75217)