Mesin pembentuk roda gigi

Gleason-Pfauter GP130S

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, An optical 3D coordinate measuring device from Keyence with a 360° 3D scan function is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/combined: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Hnodpfx Ajwx Rcysazer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts Hnsdpsyn Em Rsfx Aazsr OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2015, Technical details: Hsdsl Ha Ubepfx Aazenr Machine weight approx.: 4 t

Kondisi: bekas, Tahun pembuatan: 2009, en--Technical details: Rotor diameter: 30-500 mm Milling length: 500-1000 mm Total power requirement: 80 kW Approximate machine weight: 15 t Space requirement approx.: 3.6 x 2.5 x 3.0 m Max. module: 8 Hedpfxsv Hrp Eo Aazonr Max. module for profile milling (Et): 12 Max. module for gear hobbing: 12 Max. axial travel: 110 to 1100 mm Max. cutter spindle speed: 300 rpm Max. tangential milling cutter shift: -350 to -55 mm Max. table speed: 100 rpm Table drive: Torque motor Filtration system: Chip conveyor for magnetic materials; band filter for all floating particles in the oil Including milling arbor

Kondisi: bekas, Length: approx. 400 mm, Width: approx. 400 mm, Height: approx. 750 mm, Weight: 15 kg, For use in compressed air systems Hodpfsh D E Uwjx Aazsnr

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 6.700 h, jenis arus masuk: tiga fasa, kapasitas hisap: 5.000 m³/jam, tekanan negatif: 3.100 Pa, Oil mist extraction for halls, Plug & Play filtration tower for extraction during the emission of cooling lubricants. IVAT Ölnebel-T5K filter ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall filter ventilation — designed for numerous technological processes in production facilities, mainly during metalworking. Often, extraction systems with coolant recovery installed on machines are not sufficiently effective, or simply are not installed at all. Machine tool retooling, frequent opening of enclosures, or a lack of coverage near machining heads leads to oil mist escaping outside the machines, putting workplace personnel at risk of inhaling harmful mists and vapors. Hnjdpfx Ajxxh Tasazjr Installing a ventilation tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation complement for production halls where full separation of oil mist using coolant recovery devices is impossible or extremely difficult to achieve. Automatic air and temperature monitoring in the room. The innovative PLC control system compares data and thus detects when workplace threshold values are exceeded, heating directly at the hall ceiling, and fully automates the regulation of temperature and air quality. Capacity - up to 5000 m³/h Vacuum up to 3100 Pa Filter surface - 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device are available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, akurasi pengulangan: 0,002 mm, beban meja: 50 kg, diameter meja putar: 500 mm, The offer comprises the following components: VL-770 Measuring Head High-resolution optical 3D scanner VL-700 Control Unit Control and analysis unit, incl. software interface Hsdjy Eglqjpfx Aazjnr VL-C35 Cover Light protection hood VL-A3D Software Package Measurement and evaluation software (German) OP-88145 Calibration Plate Reference plate VL-H3G Module Form and position tolerances VL-H3R Module CAD conversion VL-B1 Accessory Calibration ball gauge OP-99031 Cable AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measurement Range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object table: Ø200 mm Tilt mechanism: up to 45° Maximum weight capacity: 50 kg MACHINE DETAILS Weight Control unit weight: 3.7 kg Object table weight: 26 kg Cover weight: 5.5 kg Measuring unit weight: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protection hood Monitor, PC, keyboard, and accessories